Extraction spectrophotometry using a lithium-ion selective metallacrown: temperature effect on extraction reaction and application to determination of lithium in serum and seawater

DOI: https://doi.org/10.1007/s44211-024-00569-9

IF: 1.967

2024-04-24

Analytical Sciences

Abstract:A metallacrown-type ionophore, 2,3-pyridinediolate-bridged (3,5-dimethylanisole)ruthenium trinuclear complex, has a high extraction selectivity for Li + , but the extraction reaction is very slow. To solve this problem, the effect of temperature on the rapidity and equilibrium of the extraction of Li + and Na + as picrates from water to toluene with the metallacrown was investigated in this study. While the extraction of Li + requires 6 h of shaking for equilibration at 25 °C, the distribution ratio becomes nearly constant after 4 h and 2 h of shaking at 37 °C and 50 °C, respectively. The extraction equilibrium constants ( K ex ) and associated thermodynamic parameters determined for Li + and Na + indicate that the extraction reactions are exothermic and enthalpy-driven: Δ H ° = − 53 kJ/mol, Δ S ° = − 0.03 kJ/(mol K) for Li + ; Δ H ° = − 28 kJ/mol, Δ S ° = − 0.03 kJ/(mol K) for Na + . Although the extraction ability for Li + and selectivity for Li + /Na + decrease with increasing temperature, the values of K ex and K ex (Li + )/ K ex (Na + ) are 1.0 × 10 7 and 1.3 × 10 4 , respectively, even at 50 °C, indicating that both are sufficiently high. In the determination of Li + by extraction spectrophotometry using this metallacrown, extraction at 50 °C for 2 h was employed to speed up the analysis. The method was applied to seawater and serum samples containing a large amount of coexisting ions such as Na + and Mg 2+ , and trace amounts (10 −6 –10 −5 mol/L order) of Li + in microvolume samples (sub-mL order) could be successfully determined.

chemistry, analytical