Abstract:Throughout the last decade, many assistive robots for people with disabilities have been developed; however, researchers have not fully utilized these robotic technologies to entirely create independent living conditions for people with disabilities, particularly in relation to activities of daily living (ADLs). An assistive system can help satisfy the demands of regular ADLs for people with disabilities. With an increasing shortage of caregivers and a growing number of individuals with impairments and the elderly, assistive robots can help meet future healthcare demands. One of the critical aspects of designing these assistive devices is to improve functional independence while providing an excellent human-machine interface. People with limited upper limb function due to stroke, spinal cord injury, cerebral palsy, amyotrophic lateral sclerosis, and other conditions find the controls of assistive devices such as power wheelchairs difficult to use. Thus, the objective of this research was to design a multimodal control method for robotic self-assistance that could assist individuals with disabilities in performing self-care tasks on a daily basis. In this research, a control framework for two interchangeable operating modes with a finger joystick and a chin joystick is developed where joysticks seamlessly control a wheelchair and a wheelchair-mounted robotic arm. Custom circuitry was developed to complete the control architecture. A user study was conducted to test the robotic system. Ten healthy individuals agreed to perform three tasks using both (chin and finger) joysticks for a total of six tasks with 10 repetitions each. The control method has been tested rigorously, maneuvering the robot at different velocities and under varying payload (1-3.5 lb) conditions. The absolute position accuracy was experimentally found to be approximately 5 mm. The round-trip delay we observed between the commands while controlling the xArm was 4 ms. Tests performed showed that the proposed control system allowed individuals to perform some ADLs such as picking up and placing items with a completion time of less than 1 min for each task and 100% success.

Autonomous function of wheelchair-mounted robotic manipulators to perform daily activities

An Intention-Driven Semi-autonomous Intelligent Robotic System for Drinking

An EOG-based wheelchair robotic arm system for assisting patients with severe spinal cord injuries

Remote Tongue-based Control of a Wheelchair Mounted Assistive Robotic Manipulator and the Effect of Adaptive Semi-automation

A Wearable Human–Machine Interactive Instrument for Controlling a Wheelchair Robotic Arm System

Control of a Wheelchair-Mounted 6DOF Assistive Robot With Chin and Finger Joysticks

Active robot-assisted feeding with a general-purpose mobile manipulator: Design, evaluation, and lessons learned

Towards Assistive Feeding with a General-Purpose Mobile Manipulator

Wheelchair Maneuvering with a Single-Spherical-Wheeled Balancing Mobile Manipulator

Eye-gaze control of a wheelchair mounted 6DOF assistive robot for activities of daily living

Development and evaluation of demonstration information recording approach for wheelchair mounted robotic arm

WeHelp: A Shared Autonomy System for Wheelchair Users

Multimodal Based Automatic Feeding Robotic Device

Implementation of Traveling Supportive System for Manual Wheelchair with Autonomous Connecting Robot

Exploiting Physical Human-Robot Interaction to Provide a Unique Rolling Experience with a Riding Ballbot

Assistive Mobile Robot with Shared Control of Brain-Machine Interface and Computer Vision

Electric Wheelchair Hybrid Operating System Coordinated with Working Range of a Robotic Arm

Open World Assistive Grasping Using Laser Selection

Haptic and Visual Feedback Assistance for Dual-Arm Robot Teleoperation in Surface Conditioning Tasks

Collaborative control for a robotic wheelchair: evaluation of performance, attention, and workload

Exploring Control Authority Preferences in Robotic Arm Assistance for Power Wheelchair Users