Abstract:Abstract In the future application of nuclear fusion, the liquid metal flows are considered to be an attractive option of the first wall of the tokamak which can effectively remove impurities and improve the confinement of plasma. Moreover, the flowing liquid metal can solve the problem of the corrosion of the solid first wall due to high thermal load and particle discharge. In the magnetic confinement fusion reactor, the liquid metal flow experiences strong magnetic and electric, fields from plasma. In the present paper, an experiment has been conducted to explore the influence of electric and magnetic fields on liquid metal flow. The direction of electric current is perpendicular to that of the magnetic field direction, and thus the Lorentz force is upward or downward. A laser profilometer based on the laser triangulation technique is used to measure the thickness of the liquid film of Galinstan. The phenomenon of the liquid column from the free surface is observed by the high-speed camera under various flow rates, intensities of magnetic field and electric field. Under a constant external magnetic field, the liquid column appears at the position of the incident current once the external current exceeds a critical value, which is inversely proportional to the magnetic field. The thickness of the flowing liquid film increases with the intensities of magnetic field, electric field, and Reynolds number. The thickness of the liquid film at the incident current position reaches a maximum value when the force is upward. The distribution of liquid metal in the channel presents a parabolic shape with high central and low marginal. Additionally, the splashing, i.e. the detachment of liquid metal is not observed in the present experiment, which suggests a higher critical current for splashing to occur.

Modeling the free-surface magnetohydrodynamics of thick liquid metal walls for fusion

Modeling of Liquid Walls in Apex Study

Experimental study on liquid metal free surface flow under magnetic and electric field for nuclear fusion

Numerical Modeling of Liquid Wall Flows for Fusion Energy Applications Using Maxwell-Navier-Stokes Equations

Thermal Mixing Enhancement of Liquid Metal MHD Free-Surface Flow by Optimizing Vortex Generator Arrays

Experimental, Numerical and Analytical Evaluation of J×b -Thrust for Fast-Liquid-metal-flow Divertor Systems of Nuclear Fusion Devices

Study on Thermal Mixing of Liquid–metal Free-Surface Flow by Obstacles Installed at the Bottom of a Channel

FreeMHD: validation and verification of the open-source, multi-domain, multi-phase solver for electrically conductive flows

Advances in Direct Numerical Simulation for MHD Modeling of Free Surface Flows

Experimental Investigation on Liquid-Metal Flow Distribution in Insulating Manifold under Uniform Magnetic Field

Thermal mixing enhancement of liquid metal film-flow by various obstacles under vertical magnetic field

Passive and active electromagnetic stabilization of free-surface liquid metal flows

Direct Numerical Simulation of Liquid Metal Free-Surface Turbulent Flows Imposed on Wall-Normal Magnetic Field

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

Development of magnetic liquid metal suspensions for magnetohydrodynamics

Investigation of cascade-type falling liquid-film along first wall of laser-fusion reactor

Lattice Boltzmann Methods for Magnetohydrodynamic Flows in Fusion Applications

Investigation of Liquid-Film Formation along First Wall of Laser-Fusion Reactor

Direct Numerical Simulation of Unstable Stratified Turbulent Flow under a Magnetic Field

Critical Exploration of Liquid Metal Plasma-Facing Components in a Fusion Nuclear Science Facility

Numerical and experimental analysis of magneto-convective flows around pipes