Abstract:FIRST (Fibered Imager foR a Single Telescope instrument) is an instrument that enables high contrast imaging and spectroscopy, thanks to a unique combination of sparse aperture masking, spatial filtering by single-mode waveguides and cross-dispersion in the visible. In order to increase the instrument’s stability and sensitivity, we have designed and fabricated a 3D laser-written optical chip 5T beam combiner. The multi-aperture beam combiner consists of 5 input waveguides spaced by 250um. Each input is split into 4 waveguides. A pairwise recombination scheme with Yjunctions produces/leads to 10 outputs (127um separation, compatible with commercial V-grooves). In this work, we present the experimental characterization of the chip: transmission performance, polarization issues and single mode spectral range. The targeted single mode spectral range must cover 550-800nm. Different optical powers for laser writing are used to finely tune the ideal single-mode behavior of the waveguides, ranging from 220 to 270mW. A straight waveguide was used as a reference, imprinted close to the first interferometric channel. Using different lasers (635nm, 780nm and 980nm) as well as wideband sources, we have been able to characterize the spectral transmission, the polarization behavior (TE/TM) and the interferometric contrast. The chip was inserted in the FIRST/SUBARU optical bench simulator at LESIA, in order to inject the 5 inputs simultaneously and scan the fringes using 4 independent MEMS, inducing a relative OPD modulation. Preliminary results show very good transmission for such a complex chip: all input channels are above 45% at 635nm (comparing the injected single mode with the sum of the 4 corresponding outputs), with two inputs reaching 80%. A huge advantage of this technology is to avoid the crosstalk due to in-plane waveguide crossings, and we show that no crosstalk is indeed observed. Both polarizations are transmitted, without noticeable birefringence. However, perfect vertical alignment of the outputs is difficult to obtain, and must be optimized prior to any connectorization to fiber bundles.

3D Free-Form Optical Lens -- Miniaturised Fibre Couplers for Astrophotonics

3D nanoprinting for fiber-integrated achromatic diffractive lens

Single- and multi-layer micro-scale diffractive lens fabrication for fiber imaging probes with versatile depth-of-field

Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Fiber-integrated Hybrid Achromatic Microlenses by Combined Femtosecond Laser 3D Printing

Femtosecond laser 3D printed micro objective lens for ultrathin fiber endoscope

3D‐Printed Micro Lens‐in‐Lens for In Vivo Multimodal Microendoscopy

Tapered multi-core fiber for lensless endoscopes

Ultra-long-working-distance spectroscopy of single nanostructures with aspherical solid immersion microlenses

Miniature 120-beam coherent combiner with 3D printed optics for multicore fiber based endoscopy

Fraxicon for Optical Applications with Aperture ∼1 mm: Characterisation Study

Free-form micro-optics enabling ultra-broadband low-loss fiber-to-chip coupling

Development of a 3D ultrafast laser written near-infrared spectro-interferometer

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

Ultrahigh Resolution Spectroscopy Across the Visible to Infrared Spectrum Using Multi-Mode Interference in a Compact Tapered Fiber

Economic fabrication of a novel hybrid planar Grating/Fresnel lens for miniature spectrometers

Fabrication of 3d Microoptical Lenses in Photosensitive Glass Using Femtosecond Laser Micromachining

Coupling light into optical fibres near the diffraction limit

FIRST 5T 3D: a Laser Written Device for FIRST/SUBARU Reducing Crosstalk and Propagation Losses

Double-layer polarization-independent achromatic metasurface array for optical fiber bundle coupling in microendoscope