Abstract:Tendon-driven Continuum Robots (TDCRs) are promising candidates for applications in confined spaces due to their unique shape, compliance, and miniaturization capability. Non-parallel tendon routing for TDCRs have shown definite advantages including segments with higher degrees of freedom, larger workspace and higher dexterity. However, most works have focused on parallel tendons to achieve constant-curvature shapes, which yields analytically simple kinematics but overly restricts the design possibilities. We believe this under-utilization of general tendon routing can be attributed to the lack of a general kinematic model that estimates shape from only tendon geometry and displacements. Cosserat rod-based models are capable of modeling general tendon routing, but they require accurate tendon tension measurements and extensive system identification, hindering their usability for design purposes. Recent attempts in developing a kinematic model are limited to simple scenarios like actuation with a single tendon or tendons on perpendicular planes. Moreover, model formulations are often disconnected from hardware, making designs challenging to build under manufacturing constraints. Our first contribution is a novel design for TDCRs based on a synovial universal joint module, which provides a mechanically discretized and feasible design space. Based on the design, our second contribution is the formulation and evaluation of an optimization-based kinematic model, capable of handling actuation of multiple general routed tendons. Lastly, we present an example application of a TDCR designed for gaited locomotion, demonstrating our method's potential for an unified model-based design pipeline.

Backstepping Control of Tendon-Driven Continuum Robots in Large Deflections Using the Cosserat Rod Model

An Analytical Differential Kinematics-Based Method for Controlling Tendon-Driven Continuum Robots

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Position and Orientation Control for Hyperelastic Multisegment Continuum Robots

Simultaneous Position-and-Stiffness Control of Underactuated Antagonistic Tendon-Driven Continuum Robots

Comparison of Modeling Approaches for a Tendon Actuated Continuum Robot With Three Extensible Segments

Recurrent neural network robust curvature tracking control of tendon-driven continuum manipulators with simultaneous joint stiffness regulation

Continuum Robots: A Real-Time Model-Based Data-Driven Nonlinear Controller

Continuum concentric push–pull robots: A Cosserat rod model

A Novel Contact-aided Continuum Robotic System: Design, Modeling, and Validation

Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots

Dynamic Manipulation and Stiffness Modulation of Cooperative Continuum Robots: Theory and Experiment

Chained Spatial Beam Constraint Model: A General Kinetostatic Model for Tendon-Driven Continuum Robots

General Kinetostatic Modeling and Deformation Analysis of a Two-Module Rod-Driven Continuum Robot with Friction Considered

Configuration Tracking Control of a Multi-Segment Soft Robotic Arm Using a Cosserat Rod Model

Cosserat Rod Modeling and Validation for a Soft Continuum Robot with Self-Controllable Variable Curvature

Lagrangian Properties and Control of Soft Robots Modeled with Discrete Cosserat Rods

Design and motion control of a tendon-driven continuum robot for aerospace applications

A Variable Curvature Model for Multi-Backbone Continuum Robots to Account for Inter-Segment Coupling and External Disturbance.

Learning-based Control for Tendon-Driven Continuum Robotic Arms

Universal-jointed Tendon-driven Continuum Robot: Design, Kinematic Modeling, and Locomotion in Narrow Tubes