Abstract:The pCam6060 photodetecting system was developed at SAO RAS and is based on the GSENSE6060BSI photodetector manufactured by GPixel (China) with a frame format of 6144x6144 active pixels and a pixel size of 10 mkm. The readout speed reached 11 fps. The back-illuminated detector has a wide spectral range of 200-1040 nm with a minimum quantum efficiency (QE) of 10% and maximum sensitivity of 95% at 580 nm. The quantum efficiency in the near-infrared range was 58% at 850 nm. The pCam6060 system controller implements a mode of simultaneous image readout via two 12-bit video channels with different gain and their subsequent combination in the controller into a single frame with an extended 16-bit dynamic range. This method simultaneously achieves a low readout noise level (about 3 e-) in the high-gain channel and a large dynamic range (full well capacity of about 100000 e-) in the low-gain channel. Back-illuminated CMOS detectors, unlike front-illuminated devices, do not have the effect of long-term preserving the residual charge from previous exposures, which makes them suitable for recording faint objects in photometric long-exposure observation methods. Communication between the host computer and the camera was carried out via a fiber optic line at distances of up to 50 m. Video data are recorded on the computer hard drive in real-time. The pCam6060 photodetecting system is designed for astronomical applications and has a moisture-proof design.

What problem does this paper attempt to address?

This paper aims to meet the demand for high - performance, large - format photoelectric detection systems in astronomical observations. Specifically, the pCam6060 photoelectric detection system is designed and developed to meet the following requirements: 1. **High Sensitivity and Wide Dynamic Range**: - To capture celestial bodies with large differences in brightness (such as recording bright stars and faint nebulae simultaneously), a detector with high sensitivity and wide dynamic range is required. The pCam6060 achieves this by combining two read - out channels with different gains (high gain and low gain). It is expressed by the formula as follows: \[ \text{Dynamic Range} = 20 \log_{10}\left(\frac{\text{Full Well Capacity}}{\text{Read - out Noise}}\right) \] - The high - gain channel provides low read - out noise (about 3 e⁻), while the low - gain channel provides a large dynamic range (the full well capacity is about 100,000 e⁻). 2. **Low Read - out Noise**: - In astronomical observations, low read - out noise is crucial for improving the signal - to - noise ratio. The pCam6060 achieves a read - out noise as low as 3 e⁻ by optimizing the controller design and adopting back - illuminated CMOS technology. 3. **High Quantum Efficiency (QE)**: - The back - illuminated CMOS detector has a relatively high quantum efficiency in the visible and near - infrared bands, reaching a maximum sensitivity of 95% at 580 nm in particular, which makes it very suitable for astronomical observations. It is expressed by the formula as follows: \[ \text{Quantum Efficiency (QE)} = \frac{\text{Number of Generated Electrons}}{\text{Number of Incident Photons}} \] 4. **No Residual Charge Effect in Long - exposure**: - Traditional front - illuminated CMOS detectors may retain residual charges after long - time exposure, affecting the subsequent image quality. The back - illuminated CMOS detector used in pCam6060 avoids this problem and is suitable for photometric measurements with long - time exposure. 5. **High - speed Read - out and Real - time Data Processing**: - To adapt to rapidly changing astronomical phenomena, the pCam6060 achieves a read - out speed of up to 11 frames per second and realizes long - distance (50 meters) data transmission and real - time storage through fiber - optic connection. In summary, this paper attempts to solve the requirements for high sensitivity, wide dynamic range, low read - out noise, high quantum efficiency and no residual charge effect in astronomical observations by developing the pCam6060 photoelectric detection system, thereby improving the quality and efficiency of astronomical observations.

Large-format photodetecting system pCam6060 with a GSENSE6060BSI CMOS detector, developed at SAO RAS and optimized for photometric methods

A 14-bit 150KS/s SAR ADC with PGA for CMOS Image Sensor

Scientific CMOS sensors in Astronomy: IMX455 and IMX411

Position-sensitive detector for the 6-meter optical telescope

Development of Large-Format Camera Systems Based on the Latest Generation Sensors for the 6-m Telescope

A New Compact Position-Sensitive PMT for Scintillation Detectors

Astronomical Camera Based on a CCD261-84 Detector with Increased Sensitivity in the Near-Infrared

Fast readout of multi-channel detectors by using a CCD/CMOS camera

A compact 16-module camera using 64-pixel CsI(Tl)/Si p-i-n photodiode imaging modules

X-ray imaging camera using INTPIX4NA SOIPIX detector with SiTCP-XG 10GbE based high-speed readout system

Beyond CCDs: Characterization of sCMOS detectors for optical astronomy

Megapixel time-gated SPAD image sensor for 2D and 3D imaging applications

39 000-Subexposures/s Dual-ADC CMOS Image Sensor With Dual-Tap Coded-Exposure Pixels for Single-Shot HDR and 3-D Computational Imaging

Performance evaluation of a GAGG-SiPM based Compton camera for gamma-ray astronomy

Performance of commercial CMOS cameras for high-speed multicolor photometry

An Over 90 dB Intra-Scene Single-Exposure Dynamic Range CMOS Image Sensor Using a 3.0 μm Triple-Gain Pixel Fabricated in a Standard BSI Process

Development of a single-photon imaging detector with pixelated anode and integrated digital read-out

GPI 2.0: Performance Evaluation of the Wavefront Sensor's EMCCD

A 39,000 Subexposures/s CMOS Image Sensor with Dual-tap Coded-exposure Data-memory Pixel for Adaptive Single-shot Computational Imaging

Characterization of a SiPM-based monolithic neutron scatter camera using dark counts

Design and Evaluation of EMPIX2, a 100 Kfps, High Dynamic Range Pixel Detector Readout ASIC for Electron Microscopy