Abstract:Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment. In the other series of experiments, the samples are annealed for 51h at 160°C prior to testing.A constitutive model is developed for the viscoplastic behavior of isotactic polypropylene at finite strains. A semicrystalline polymer is treated as equivalent heterogeneous network of chains bridged by permanent junctions (physical cross-links and entanglements). The network is thought of as an ensemble of meso-regions connected with each other by links (lamellar blocks). In the sub-yield region of deformations, junctions between chains in meso-domains slide with respect to their reference positions (which reflects sliding of nodes in the amorphous phase and fine slip of lamellar blocks). Above the yield point, the sliding process is accompanied by displacements of meso-domains in the ensemble with respect to each other (which reflects coarse slip and fragmentation of lamellar blocks). To account for alignment of disintegrated lamellar blocks along the direction of maximal stresses (which is observed as strain-hardening of specimens in the post-yield regions of deformations) elastic moduli are assumed to depend on the principal invariants of the right Cauchy–Green tensor for the viscoplastic flow.Stress–strain relations for a semicrystalline polymer are derived by using the laws of thermodynamics. The constitutive equations are determined by five adjustable parameters that are found by matching observations. Fair agreement is demonstrated between the experimental data and the results of numerical simulation. A noticeable difference is revealed between the mechanical responses of non-annealed and annealed specimens: (i) necking of samples not subjected to thermal treatment precedes coarse slip and fragmentation of lamellar blocks, whereas cold-drawing of annealed specimens up to a longitudinal strain of 80% does not induce spatial heterogeneity of their deformation; (ii) the elastic modulus increases with the strain rate for non-annealed specimens and decreases for annealed samples.

On the effect of isotropic and anisotropic dissipative response functions with associated and non-associated flow on the inelastic behaviour of polymeric composites

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Elastic-gap free formulation in strain gradient plasticity theory

The interplay of inertia and elasticity in polymeric flows

A structurally frame-indifferent model for anisotropic visco-hyperelastic materials

A strain rate dependent and anisotropic failure material model for short fiber reinforced plastics based on energy density accounting for local fiber orientation

Numerical simulation of fiber orientation kinetics and rheology of fiber-filled polymers in uniaxial extension

Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior

Perspective on the description of viscoelastic flows via continuum elastic dumbbell models

Some properties of the dissipative model of strain-gradient plasticity

An invariant based transversely-isotropic constitutive model for unidirectional fibre reinforced composites considering the matrix viscous effects

A Progressive Damage Model for unidirectional Fibre Reinforced Composites with Application to Impact and Penetration Simulation

Phenomenological constitutive laws for the dissipative behaviour of highly compressible elastomers and their finite element implementation

Linear-Nonlinear Stiffness Responses of Carbon Fiber-Reinforced Polymer Composite Materials and Structures: A Numerical Study

The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains

On energetic and dissipative gradient effects within higher-order strain gradient plasticity: Size effect, passivation effect, and Bauschinger effect

A combined viscoelasticity-viscoplasticity-anisotropic damage model with evolving internal state variables applied to fiber reinforced polymer composites

No yield stress required: Stress-activated flow in simple yield-stress fluids

A model to describe the cyclic anisotropic mechanical behavior of short fiber-reinforced thermoplastics

Modelling and simulation of coupled fluid transport and time-dependent fracture in fibre-reinforced hydrogel composites