Torsion Resistant Strain Limiting Layers Enable High Grip Strength of Electrically-Driven Handed Shearing Auxetic Grippers

Ian Good,Srivatsan Balaji,Jeffrey I. Lipton

2024-12-11

Abstract:Soft grippers have demonstrated a strong ability to successfully pick and manipulate many objects. A key limitation to their wider adoption is their inability to grasp larger payloads due to objects slipping out of grasps. We have overcome this limitation by introducing a torsionally rigid strain limiting layer (TR-SLL). This reduces out-of-plane bending while maintaining the gripper's softness and in-plane flexibility. We characterize the design space of the strain limiting layer and Handed Shearing Auxetic (HSA) actuators for a soft gripper using simulation and experiment. The inclusion of the TR-SLL with HSAs enables HSA grippers to be made with a single digit. We found that the use of our TR-SLL HSA gripper enabled pinch grasping of payloads over 1 kg. We demonstrate a lifting capacity of 5 kg when loading using the TR-SLL. We also demonstrate a peak pinch grasp force of 5.8 N, and a peak planar caging force of 14.5 N. Finally, we test the TR-SLL gripper on a suite of 43 YCB objects. We show success on 37 objects demonstrating significant capabilities.

Robotics

What problem does this paper attempt to address?

### Problems the paper attempts to solve

This paper aims to solve the problem that objects are prone to slipping when soft grippers grasp larger loads. Specifically, existing soft grippers perform poorly when grasping larger or heavier objects because they cannot resist torsion and lateral loads. Especially when grasping perpendicular to the direction of gravity, they are prone to deformation and distortion, thus losing their gripping ability.

To solve this problem, the author introduced a **Torsion Resistant Strain Limiting Layer (TR - SLL)**. This design can reduce out - of - plane bending while maintaining the softness and in - plane flexibility of the gripper, thereby significantly improving the gripping strength and load - bearing capacity of the gripper.

### Main contributions

1. **Introduction of TR - SLL**: By introducing TR - SLL, the author successfully reduced the out - of - plane deformation of the soft gripper during the grasping process, thereby improving the torsion resistance and gripping strength of the gripper.

2. **Improvement of load - bearing capacity**: The experimental results show that the gripper using TR - SLL can achieve a clamping and grasping of more than 1 kilogram, and can be increased to a maximum load - bearing capacity of 5 kilograms when loaded.

3. **Verification of design space**: Through simulation and experiment, the author analyzed in detail the design space of TR - SLL and its combination effect with the Handed Shearing Auxetic (HSA) actuator, proving the effectiveness of this design.

4. **Practical application test**: The author tested 43 objects in the YCB dataset using the TR - SLL gripper, and the results showed that it was successful on 37 objects, demonstrating the powerful function of this gripper.

### Key formulas

- **Static friction formula**:
\[
F_{\text{static}}=\mu F_n
\]
where \(F_{\text{static}}\) is the maximum force that the gripper can withstand, \(\mu\) is the coefficient of static friction, and \(F_n\) is the normal force applied by the gripper.

- **Torsional stiffness formula**:
\[
\kappa = \frac{M}{\theta}
\]
where \(\kappa\) is the torsional stiffness, \(M\) is the applied torque, and \(\theta\) is the angular displacement.

- **Grasping force calculation formula**:
\[
F_g=\frac{\kappa}{r^2}x + c_{\tau}\frac{\phi}{r_h}
\]
where \(F_g\) is the grasping force, \(\kappa\) is the torsional stiffness, \(r\) is the distance from the neutral axis of the gripper to the object, \(x\) is the vertical deformation, \(c_{\tau}\) is the torsional stiffness of HSAs, \(r_h\) is the distance from the center of the HSA to the grasping surface, and \(\phi\) is the HSA torsion angle caused by the motor.

Through these improvements, the paper shows an effective method to enhance the performance of soft grippers, enabling them to be applied in a wider range of scenarios.