Kartik Patel,Junbo Zhang,John Kimionis,Lefteris Kampianakis,Michael S. Eggleston,Jinfeng Du
Abstract:Backscatter radio is a promising technology for low-cost and low-power Internet-of-Things (IoT) networks. The conventional monostatic backscatter radio is constrained by its limited communication range, which restricts its utility in wide-area applications. An alternative bi-static backscatter radio architecture, characterized by a dis-aggregated illuminator and receiver, can provide enhanced coverage and, thus, can support wide-area applications. In this paper, we analyze the scalability of the bi-static backscatter radio for large-scale wide-area IoT networks consisting of a large number of unsynchronized, receiver-less tags. We introduce the Tag Drop Rate (TDR) as a measure of reliability and develop a theoretical framework to estimate TDR in terms of the network parameters. We show that under certain approximations, a small-scale prototype can emulate a large-scale network. We then use the measurements from experimental prototypes of bi-static backscatter networks (BNs) to refine the theoretical model. Finally, based on the insights derived from the theoretical model and the experimental measurements, we describe a systematic methodology for tuning the network parameters and identifying the physical layer design requirements for the reliable operation of large-scale bi-static BNs. Our analysis shows that even with a modest physical layer requirement of bit error rate (BER) 0.2, 1000 receiver-less tags can be supported with 99.9% reliability. This demonstrates the feasibility of bi-static BNs for large-scale wide-area IoT applications.
What problem does this paper attempt to address?
### What problem does this paper attempt to solve?
This paper aims to solve the **scalability problem of bi - static backscatter networks (BNs) in large - scale wide - area Internet of Things (IoT) applications**. Specifically, the researchers are concerned with how to ensure the reliable operation of bi - static backscatter networks composed of a large number of receiver - less tags without relying on synchronous receivers.
#### Background and Challenges
1. **Limitations of Traditional Monostatic Backscatter Networks**:
- Monostatic backscatter networks are limited in wide - area applications due to their limited communication range.
- In the monostatic architecture, the transmitting and receiving links are located within the same device, resulting in the signal - to - noise ratio (SNR) of the tag being affected by the round - trip path loss, and the overall working range is limited by the forward link (Tx → Tag), rather than the reverse link (Tag → Rx).
2. **Advantages of Bi - static Backscatter Networks**:
- The bi - static architecture can significantly improve the coverage area by separating the transmitter and the receiver, thus supporting wide - area applications.
- However, the scalability of bi - static networks has not been fully evaluated, especially in supporting large - scale network applications.
3. **Challenges in Large - Scale Networks**:
- In large - scale networks, there are a large number of tags that are not synchronized, and packet collisions are likely to occur, affecting reliability.
- A method is needed to evaluate and optimize network parameters to ensure high reliability and a low packet loss rate.
#### Solutions
To address these challenges, the researchers proposed the following solutions:
1. **Introduce the Tag Drop Rate (TDR) as a Reliability Indicator**:
- TDR is defined as the proportion of tags that fail to successfully transmit packets within an inventory period.
2. **Develop a Theoretical Framework to Estimate TDR**:
- Introduce the "Collision Zone Parameter" (α), which is used to quantify the impact of packet collisions on packet corruption.
- Use a probabilistic analysis framework to model the probability of packet collisions and derive the expression of TDR.
3. **Use Small - scale Prototype Networks for Experimental Verification**:
- Measure the collision zone parameter α through small - scale experimental networks to infer the performance of large - scale networks.
- The results show that even under lower physical - layer requirements (such as bit error rate BER = 0.2), bi - static BNs can support up to 1,000 receiver - less tags and achieve 99.9% reliability.
4. **Propose a System Design Method**:
- Based on the theoretical model and experimental results, provide a systematic method to adjust network parameters to meet the reliability requirements of large - scale bi - static BNs.
### Summary
The main contribution of this paper is to provide a framework for evaluating and optimizing the scalability of bi - static backscatter networks, especially for large - scale wide - area IoT applications. By introducing new reliability indicators and collision zone parameters, and combining theoretical analysis and experimental verification, the researchers demonstrated the feasibility of bi - static BNs in practical applications.