Abstract:Standard signal processing approaches for scintillation detectors in positron emission tomography (PET) derive accurate estimates for 511 keV photon time of interaction and energy imparted to the detection media from aggregate characteristics of electronic pulse shapes. The ultimate realization of a scintillation detector for PET is one that provides a unique timestamp and position for each detected scintillation photon. Detectors with these capabilities enable advanced concepts for three-dimensional (3D) position and time of interaction estimation with methods that exploit the spatiotemporal arrival time kinetics of individual scintillation photons. In this work, we show that taking into consideration the temporal photon emission density of a scintillator, the channel density of an analog silicon photomultiplier (SiPM) array, and employing fast electronic readout with digital signal processing, a detector that counts and timestamps scintillation photons can be realized. To demonstrate this approach, a prototype detector was constructed, comprising multichannel electronic readout for a bismuth germanate (BGO) scintillator coupled to an SiPM array. In proof-of-concept measurements, we were able to count and provide unique timestamps for 66% of all optical photons, where the remaining 34% (two-or-more-photon pulses) are also independently counted, but each photon bunch shares a common timestamp. We show this detector concept can implement 3D positioning of 511 keV photon interactions and thereby enable corrections for time of interaction estimators. The detector achieved 17.6% energy resolution at 511 keV and 237±10 ps full-width-at-half-maximum (FWHM) coincidence time resolution (CTR) (fast spectral component) versus a reference detector. We outline the methodology, readout, and approach for achieving this detector capability in first-ever, proof-of-concept measurements for scintillation photon counting detector with analog silicon photomultipliers. The presented detector concept is a promising design for large area, high sensitivity TOF-PET detector modules that can implement advanced event positioning and time of interaction estimators, which could push state-of-the-art performance.

Evaluation of Coincidence Time Resolution in a liquid xenon detector with silicon photomultipliers

PETALO: a Time-of-Flight PET with liquid xenon

PETALO: Time-of-Flight PET with liquid xenon

Liquid Xenon Detectors for Positron Emission Tomography

Time-of-flight positron emission tomography using liquid xenon scintillation

Performance of a Prototype of Liquid Xenon Scintillation Detector System for Positron Emission Tomography

Liquid xenon in nuclear medicine: state-of-the-art and the PETALO approach

Monte Carlo characterization of PETALO, a full-body liquid xenon-based PET detector

A liquid Xenon Positron Emission Tomograph for small animal imaging : first experimental results of a prototype cell

Experimental study of a liquid Xenon PET prototype module

The PETALO project

Measurement of the scintillation resolution in liquid xenon and its impact for future segmented calorimeters

Scintillation in Liquid Xenon for Gamma-Ray Medical Imaging: From Single Time-over-Threshold to Multi-Time-over-Threshold PMT Signal Measurements

Characterization of TOF-PET Detectors Based on Monolithic Blocks and ASIC-Readout

Status and perspectives of the PETALO project

XEMIS: A liquid xenon detector for medical imaging

Towards time-of-flight PET with a semiconductor detector

INVESTIGATION OF LSO SCINTILLATORS FOR HIGH-RESOLUTION PET DETECTORS

Scintillation and Cherenkov photon counting detectors with analog silicon photomultipliers for TOF-PET

Scintillation of liquid xenon and its application to nuclear radiation detectors