Chathuri Weragama,Joonas Kokkoniemi,Mar Francis De Guzman,Katsuyuki Haneda,Pekka Kÿosti,Markku Juntti
Abstract:Millimeter-Wave (mmWave) (30-300 GHz) and D band (110-170 GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond with increased demand for greater bandwidth and capacity. This paper focuses on deriving a generalized channel impulse response for mmWave communications, considering both outdoor and indoor locations for line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. The analysis is based on statistical insights obtained from measurements conducted at distinct locations with a center frequency of 142 GHz, examining parameters such as path gain, delay, number of paths (NoP), and angle distributions. Whereas different distributions serve as candidate models for the gain of LOS communications, only specific distributions accurately describe the NLOS gain, LOS and NLOS delay, LOS and NLOS NoP, and LOS and NLOS angular distributions. The channel is modeled based on geometry-based stochastic channel modeling (GBSM) with parameters derived from the statistical analysis. The maximum excess delay is used as a metric to evaluate the performance of the proposed model against empirical data.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the challenges of channel modeling and propagation characteristics faced by the sixth - generation (6G) communication system in the D - band (110 - 170 GHz). Specifically, the paper aims to:
1. **Provide a detailed propagation characteristic analysis of millimeter - wave communication**: Research the propagation behavior of millimeter - wave radio in indoor and outdoor environments, including path gain, delay, and number of paths (NoP) in line - of - sight (LOS) and non - line - of - sight (NLOS) scenarios, providing valuable data for the development of future millimeter - wave systems.
2. **Develop a channel impulse response model suitable for MIMO millimeter - wave communication**: Based on the geometric - based stochastic channel model (GBSM), propose a general - purpose tool that can accurately simulate and predict the millimeter - wave channel behavior in different scenarios, helping researchers and engineers conduct more accurate channel simulations.
3. **Explore the advantages and limitations of extracting channel statistical information from measurement data**: Through the analysis of actual measurement data, identify which distributions can accurately describe the path gain, delay, NoP, and angular distributions in LOS and NLOS conditions, and discuss the advantages and disadvantages of relying solely on measurement data for channel modeling, providing guidance for subsequent research.
### Specific problems and solutions
- **Complexity brought by high frequencies**: The short wavelength in the D - band leads to increased scattering, making multipath modeling more complex. The paper addresses this issue by combining the geometric - based stochastic channel model (GBSM) with statistical methods.
- **Statistical analysis of channel parameters**: Through statistical analysis of measurement data in different environments, determine the distribution characteristics of key parameters such as path gain, delay, and NoP, thereby providing a theoretical basis for channel modeling.
- **Verify model performance**: Use the maximum excess delay (MED) as an evaluation metric, compare the proposed model with the measured data, and verify its validity.
### Formula summary
1. **Normalized received path gain formula**:
\[
P_n(\text{dB}) = P(\text{dBm}) - 20 \log_{10} \left( \frac{4\pi f d}{c} \right)
\]
where \( P_n(\text{dB}) \) is the normalized power, \( P(\text{dBm}) \) is the measured power, \( d \) is the path length, \( f \) is the operating frequency, and \( c \) is the speed of light in free space.
2. **Normalized delay formula**:
\[
\tau_n = \tau_l - \tau_1
\]
where \( \tau_n \) is the normalized delay, \( \tau_l \) is the measured delay of the \( l \) - th multipath component, and \( \tau_1 \) is the delay of the first arriving path.
3. **Maximum excess delay formula**:
\[
\tau = \tau_L - \tau_1
\]
where \( \tau_L \) is the delay of the last arriving multipath component, and \( \tau_1 \) is the delay of the first arriving path.
Through these methods, the paper provides important theoretical and technical support for understanding and modeling the D - band millimeter - wave communication channel.