Talhah Shamshad Ali Ansari,Rainald Löhner,Roland Wüchner,Harbir Antil,Suneth Warnakulasuriya,Ihar Antonau,Facundo Airaudo
Abstract:A finite-element method dependant adjoint-based procedure to determine the temperature field of structures based on measured displacements or strains and a set of standard loads is developed and tested. Given a series of force and deformation measurements, the temperature field is obtained by minimizing the adequately weighted differences between the measured and computed values. Three numerical examples - a Plate With a Hole, a Bridge, and a Hoover Dam example - each with multiple sensors distributed in different configurations, demonstrate the procedure's capabilities. A target temperature distribution is prescribed in all cases, and the displacement sensor data is recorded. The optimization algorithm (here, steepest descent with Barzilai-Borwein step) uses this data to optimize the temperatures such that the same deformation is obtained at the sensor locations. Vertex Morphing is used as a filter to mitigate the ill-conditioning. Results show that the proposed approach can accurately reconstruct the target thermal distribution, especially when more sensors are used. Additionally, it is observed that the sensors do not need to be positioned in the region of interest; the method remains effective as long as the sensors can detect changes related to that area. A comparison with standard spatial interpolation techniques, namely, k-nearest neighbors and ordinary and universal kriging, is performed using temperature sensors in the same configurations. The proposed approach performs remarkably better than the interpolation techniques with a reduction in the root-mean-squared error of up to 38.4%, 94%, and 40%, for the Plate With a Hole, the Bridge, and the Dam examples, respectively.
What problem does this paper attempt to address?
### What problem does this paper attempt to solve?
This paper aims to solve the problem of how to accurately reconstruct the temperature field in a structure through limited displacement or strain measurement data. Specifically, the author proposes a finite element method based on the adjoint - based method to determine the temperature distribution of the structure. The following are the main objectives and background of this research:
1. **Problem background**:
- **Influence of non - uniform temperature distribution**: Many large - scale structures (such as bridges, dams, etc.) will be affected by non - uniform solar radiation and other environmental factors (such as wind speed, humidity, cloud cover, etc.) in actual use, resulting in a complex and non - uniform internal temperature distribution.
- **Limitations of existing methods**: Traditional temperature monitoring methods (such as directly using temperature sensors or spatial interpolation techniques) have limitations when dealing with complex structures, especially when the number of sensors is limited or their positions are not ideal, it is difficult to accurately reconstruct the temperature field.
2. **Research objectives**:
- **Reconstruct the temperature field through displacement/strain data**: The paper proposes a new method, which uses the data of displacement or strain sensors installed on the structure, combined with standard load conditions, and inversely deduces the temperature distribution of the structure through an optimization algorithm.
- **Improve the accuracy of temperature field reconstruction**: By introducing the adjoint method and optimization algorithms (such as the steepest descent method combined with the Barzilai - Borwein step size), this method can more accurately reconstruct the temperature field with fewer sensors.
- **Verify the effectiveness of the method**: Through three numerical examples (a plate with holes, a bridge, and a simplified model of the Hoover Dam), the performance of this method under different sensor configurations is shown and compared with traditional spatial interpolation techniques.
3. **Main contributions**:
- **Innovation**: This is the first time that the adjoint method has been applied to temperature field reconstruction in high - fidelity structural health monitoring (SHM).
- **Universality**: This method is not only applicable to civil engineering structures, but can also be extended to other engineering fields, such as structural wind engineering, aerospace, and mechanical engineering.
- **Robustness**: Even if the sensors are not in the areas with significant temperature changes, as long as the structural changes caused by temperature can be detected, this method is still effective.
4. **Optimization process**:
- **Objective function**: Minimize the weighted difference between the measured value and the calculated value.
- **Optimization algorithm**: Use the steepest descent method combined with the Barzilai - Borwein step size for optimization.
- **Filtering technique**: Introduce Vertex Morphing as a filter to alleviate ill - conditioned problems.
5. **Result comparison**:
- Compared with traditional spatial interpolation techniques such as k - nearest neighbor interpolation (kNN), ordinary kriging (OK), and universal kriging (UK), this method shows higher accuracy in multiple test cases, and the root mean square error (RMSE) is reduced by 38.4%, 94% and 40% respectively.
In summary, this paper solves the problem of accurately reconstructing the temperature distribution of complex structures under limited sensor conditions by proposing a temperature field reconstruction technique based on the adjoint method, providing new ideas and technical means for structural health monitoring.