Abstract:This paper presents a robotic in-hand manipulation technique that can be applied to pick an object too large to grasp in a prehensile manner, by taking advantage of its contact interactions with a curved, passive end-effector, and two flat support surfaces. First, the object is tilted up while being held between the end-effector and the supports. Then, the end-effector is tucked into the gap underneath the object, which is formed by tilting, in order to obtain a grasp against gravity. In this paper, we first examine the mechanics of tilting to understand the different ways in which the object can be initially tilted. We then present a strategy to tilt up the object in a secure manner. Finally, we demonstrate successful picking of objects of various size and geometry using our technique through a set of experiments performed with a custom-made robotic device and a conventional robot arm. Our experiment results show that object picking can be performed reliably with our method using simple hardware and control, and when possible, with appropriate fixture design.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to use a passive end - effector with a curved shape to grasp objects that are too large to be grasped by conventional clamping methods. Specifically, the author proposes an "in - hand manipulation" technique that utilizes the contact interaction between the object and the environmental surfaces (such as walls and supporting surfaces) to achieve successful grasping of these large objects. ### Main Problem Description 1. **Grasping Oversized Objects**: For objects that are too large to be directly grasped by simple methods such as traditional parallel grippers, how can reliable grasping be carried out? 2. **Utilizing Environmental Surfaces**: How can the contact between the object and the fixed surfaces in the environment (such as wall surfaces and flat supporting surfaces) be utilized to assist the robot in completing the grasping action? 3. **Tilting and Regrasping**: How can a stable grasp against gravity be obtained by tilting the object and inserting the end - effector beneath it? ### Method Overview - **Initial Tilting**: First, the object is tilted and lifted between the end - effector and two supporting surfaces. - **Inserting the Gap**: Then, the end - effector is inserted into the gap at the bottom of the object formed by the tilting. - **Final Grasping**: Finally, the end - effector adjusts its position so that the object is separated from the supporting surface and forms a stable grasping state. ### Research Significance This method provides a technical solution for grasping large objects without the need for complex multi - degree - of - freedom manipulators or high - precision sensors, and has practical application value, especially in fields such as logistics and manufacturing. ### Explanation of Key Formulas and Diagrams The paper involves some mechanical analysis and planning strategies, but there are no complex mathematical formulas. The following is a Markdown - formatted description of the key steps: - **Force Balance during Tilting**: - Let the mass of the object be \( m \) and the acceleration due to gravity be \( g \). - The gravitational force \( F_g = mg \) acting on the object. - In order to maintain static equilibrium during the tilting process, it is necessary to ensure that the resultant moment at all contact points can counteract the gravitational moment. - **Friction Cone Analysis**: - The friction cones at contact points \( A \) and \( B \) are represented as \( f_A \) and \( f_B \) respectively. - When the friction cone \( f_C \) can contain the resultant of \( f_A \) and \( f_B \), the object can be in a force - closure state. Through the above methods, the paper shows how to achieve reliable object grasping using simple hardware and control strategies.

Picking by Tilting: In-Hand Manipulation for Object Picking using Effector with Curved Form

Picking, grasping, or scooping small objects lying on flat surfaces: A design approach

In the Wild Ungraspable Object Picking with Bimanual Nonprehensile Manipulation

In-Hand Singulation and Scooping Manipulation with a 5 DOF Tactile Gripper

Precise In-Hand Manipulation of Soft Objects using Soft Fingertips with Tactile Sensing and Active Deformation

A Robotic Semantic Grasping Method for Pick-and-place Tasks

Compliant Suction Gripper with Seamless Deployment and Retraction for Robust Picking against Depth and Tilt Errors

In-Hand Manipulation with Soft Fingertips

TacRot: A Parallel-Jaw Gripper with Rotatable Tactile Sensors for In-Hand Manipulation

Tactile-Driven Non-Prehensile Object Manipulation via Extrinsic Contact Mode Control

A Mechanical Screwing Tool for 2-Finger Parallel Grippers -- Design, Optimization, and Manipulation Policies

Mechanical Intelligence for Prehensile In-Hand Manipulation of Spatial Trajectories.

A Dexterous Soft Robotic Hand for Delicate In-Hand Manipulation

Design and Control of Roller Grasper V2 for In-Hand Manipulation

Multi-Object Grasping -- Generating Efficient Robotic Picking and Transferring Policy

The Intelligent Grasping Tactics Of Dexterous Hand

A Soft Robotic Gripper with Active Palm for In-Hand Object Reorientation

Contact-Aware Non-prehensile Robotic Manipulation for Object Retrieval in Cluttered Environments

Mechanical Intelligence for Adaptive Precision Grasp.

A Hand Combining Two Simple Grippers to Pick up and Arrange Objects for Assembly