Non-Reciprocal Reconfigurable Intelligent Surfaces

Jiaqi Xu,Haoyu Wang,Rang Liu,Josef A. Nossek,A. Lee Swindlehurst

2024-11-24

Abstract:In contrast to conventional RIS, the scattering matrix of a non-reciprocal RIS (NR-RIS) is non-symmetric, leading to differences in the uplink and the downlink components of NR-RIS cascaded channels. In this paper, a physically-consistent device model is proposed in which an NR-RIS is composed of multiple groups of two-port elements inter-connected by non-reciprocal devices. The resulting non-reciprocal scattering matrix is derived for various cases including two-element groups connected with isolators or gyrators, and general three-element groups connected via circulators. Signal models are given for NR-RIS operating in either reflecting-only or simultaneously transmitting and reflecting modes. The problem of NR-RIS design for non-reciprocal beamsteering is formulated for three-element circulator implementations, and numerical results confirm that non-reciprocal beamsteering can be achieved with minimal sidelobe power. We also show that our physically consistent NR-RIS architecture is effective in implementing channel reciprocity attacks, achieving similar performance to that with idealized NR-RIS models.

Signal Processing,Systems and Control

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the channel reciprocity problem in the existing reconfigurable intelligent surface (RIS) technology. Specifically, traditional RIS usually assumes that its phase - shift or scattering matrix is symmetric, that is, the channel exhibits the same characteristics in the uplink and downlink. However, in practical applications, non - reciprocal RIS (NR - RIS) can provide more flexibility and functionality, such as achieving more complex beam control and reducing sidelobe power.

### Main contributions of the paper

1. **Propose a physically - consistent NR - RIS device model**:
- The authors propose a physically - consistent NR - RIS device model based on multi - port communication theory. This model takes into account the situation of connecting multiple RIS elements using non - reciprocal devices such as isolators, gyrators and circulators.
- These devices make the scattering matrix (S - matrix) of the entire system asymmetric, thus achieving the difference between the uplink and the downlink.

2. **Signal model and non - reciprocal beam control**:
- The article provides signal models of NR - RIS in the reflection mode and the simultaneous transmit and reflect (STAR) mode.
- Based on these models, the authors show how to achieve non - reciprocal beam control by optimizing the configuration of NR - RIS, especially for the implementation of the three - element circulator structure.

3. **Numerical result verification**:
- Numerical results show that by increasing the number of NR - RIS elements, the sidelobe power can be significantly reduced, and the expected non - reciprocal beam control can be achieved.
- In addition, the article also shows how to successfully implement a channel reciprocity attack (CRACK) using a physically - consistent NR - RIS architecture, thereby reducing the performance of MIMO precoding methods.

### Formula presentation

- **Asymmetric scattering matrix of two - element groups**:
\[
\Phi=\begin{bmatrix}
A_1 & 0 \\
B_1B_2 & A_2
\end{bmatrix}
\]
where \(A_1, A_2\) and \(B_1, B_2\) are the scattering matrix elements of the two RIS elements respectively.

- **Asymmetric scattering matrix of three - element groups**:
\[
\Phi=\begin{bmatrix}
A_1 + B_1^2D_2D_3 / \Delta & B_1B_2D_3 / \Delta & B_1B_3 / \Delta \\
B_1B_2 / \Delta & A_2 + B_2^2D_1D_3 / \Delta & B_2B_3D_1 / \Delta \\
B_1B_3D_2 / \Delta & B_2B_3 / \Delta & A_3 + B_3^2D_1D_2 / \Delta
\end{bmatrix}
\]
where \(\Delta = 1 - D_1D_2D_3\).

- **Optimization objective function**:
\[
\min_{\bar{\Phi}, \alpha, \alpha'}\frac{1}{L}\sum_{l = 1}^{L}\left(\left|v^T(\theta_l)\bar{\Phi}v(\theta_B)\right|^2-\alpha P(\theta_l)\right)^2+\left(\left|v^T(\theta_l)\bar{\Phi}v(\theta_U)\right|^2-\alpha' P'(\theta_l)\right)^2
\]
where \(\bar{\Phi}\) is the block - diagonal scattering matrix, \(v(\theta)\) is the direction vector, and \(P(\theta_l)\) and \(P'(\theta_l)\) are the desired downlink and uplink beam patterns respectively.

### Conclusion

This paper proposes a physically - consistent NR - RIS device...