Soft Manipulation Surface With Reduced Actuator Density For Heterogeneous Object Manipulation

Pratik Ingle,Kasper Støy,Andres Faiña

2024-11-22

Abstract:Object manipulation in robotics faces challenges due to diverse object shapes, sizes, and fragility. Gripper-based methods offer precision and low degrees of freedom (DOF) but the gripper limits the kind of objects to grasp. On the other hand, surface-based approaches provide flexibility for handling fragile and heterogeneous objects but require numerous actuators, increasing complexity. We propose new manipulation hardware that utilizes equally spaced linear actuators placed vertically and connected by a soft surface. In this setup, object manipulation occurs on the soft surface through coordinated movements of the surrounding actuators. This approach requires fewer actuators to cover a large manipulation area, offering a cost-effective solution with a lower DOF compared to dense actuator arrays. It also effectively handles heterogeneous objects of varying shapes and weights, even when they are significantly smaller than the distance between actuators. This method is particularly suitable for managing highly fragile objects in the food industry.

Robotics

What problem does this paper attempt to address?

This paper attempts to solve several key problems faced in robot manipulation, especially the challenges encountered when dealing with objects of different shapes, sizes and fragility. Specifically:

1. **Limitations of traditional gripper methods**:
- Although grippers provide high precision and low degrees of freedom (DOF), they can only handle specific types of objects.
- Grippers are unable to handle multiple objects simultaneously and perform poorly for objects with irregular shapes, soft materials or those requiring fine force control.

2. **Limitations of existing surface manipulation systems**:
- Surface manipulation systems (such as wheel - or piston - based systems) usually require a large number of actuators, increasing complexity and cost.
- When the size of an object is smaller than the actuator spacing or close to the surface area of a single actuator, the efficiency of these systems will decrease significantly or even fail.

To solve these problems, the author proposes a new type of manipulation hardware that uses linearly - actuated actuators arranged at equal intervals and a soft surface layer to achieve object manipulation. The main advantages of this design include:

- **Reducing the number of actuators**: By using a soft surface layer between actuators, the number of actuators required can be reduced while covering a large area, thereby reducing cost and complexity.
- **Handling heterogeneous objects**: This system can effectively handle objects of various shapes, sizes and weights, including very small objects (such as small items of 0.5 cm), and is particularly suitable for handling highly fragile objects, such as items in the food industry.
- **Improving flexibility and adaptability**: The soft surface layer can be adjusted according to the characteristics of the object, for example, changing the friction, softness or stretchability to adapt to different types of objects.

### Formulas and Technical Details

To better understand the operating principle of this system, here are several key technical details and formulas:

1. **Actuator motion control**:
- Each actuator is driven by a DC geared motor, converting rotational motion into linear motion. For example, using a pulley with a diameter of 5 cm and a motor with a maximum torque of 0.29 Nm can generate a force of approximately 11.6 N.
\[
F = T / r = 0.29 \, \text{Nm} / 0.025 \, \text{m} = 11.6 \, \text{N}
\]

2. **Object motion trajectory**:
- The motion of an object on the soft surface can be achieved by adjusting the height of the actuators. For example, by gradually increasing the height of the actuators on the diagonal, the object can be made to move along the diagonal.
- The motion trajectory of an object can be described by position changes. Assuming the object moves from the center to the edge:
\[
x(t) = v_x t, \quad y(t) = v_y t
\]
where \(v_x\) and \(v_y\) are the velocity components of the object on the X - axis and Y - axis respectively.

3. **Experimental verification**:
- The motion behaviors of objects of different shapes and weights on the soft surface have been verified through experiments, including spheres, discs and cubes. The experimental results show that the motion mode of an object (rolling, sliding or pulling) depends on its shape and the friction between it and the soft surface.

### Conclusion

This research proposes an innovative soft - surface manipulation system that can effectively handle various heterogeneous objects while reducing the number of actuators. This provides new ideas for the future development of more flexible, efficient and low - cost robot manipulation systems.