Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

Effect of Gaussian wake amplitude on wake-induced transition for a T106A low pressure turbine cascade

Les and Cdns Investigation of T106c Low Pressure Turbine

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Effects of Periodic Incoming Wakes on the Aerodynamics of a High-Speed Low-Pressure Turbine Cascade

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Numerical investigation and loss estimation of high-pressure turbine cascade flow with contoured endwall and incoming wakes

DIRECT NUMERICAL SIMULATION OF AN HPT STAGE: UNSTEADY BOUNDARY LAYER TRANSITION AND THE RESULTING FLOW STRUCTURES

Separation-induced transition on a T106A blade under low and elevated free stream turbulence

Turbulent Kinetic Energy Production in the Vane of a Low-Pressure Linear Turbine Cascade with Incoming Wakes

DDES Analysis of the Wake Vortex Related Unsteadiness and Losses in the Environment of a High-Pressure Turbine Stage

Direct Numerical Simulation on the Unsteady Flow Field of Low-Pressure Turbine Cascades With and Without Upstream Wake at Low Reynolds Number

Exploring the Aerodynamic Effect of Blade Gap Size via a Transient Simulation of a Four-Stage Turbine

Simulation Of Transitional Flow On Low Pressure Turbine Blade With Unsteady Downstream Potential Interaction

Influences of Trailing Boundary Layer Velocity Profiles on Wake Vortex Formation in a High-Subsonic-turbine Cascade

Numerical Investigation on Ultra-High-lift Low-Pressure Turbine Cascade Aerodynamics at Low Reynolds Numbers Using Transition-Based Turbulence Models

High-Fidelity Simulation Study of the Unsteady Flow Effects on High-Pressure Turbine Blade Performance

Transient growth mechanisms of low Reynolds number flow over a low-pressure turbine blade

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

Incidence Adaptation to the Influence of Wake Sweeps on the Aerodynamic Performance of a Low-Pressure Turbine Cascade

Multi-Objective Development of Machine-Learnt Closures for Fully Integrated Transition and Wake Mixing Predictions in Low Pressure Turbines

Unsteady Passing Wake Effects on Turbine Blade Tip Aerodynamic and Aerothermal Performance with Film Cooling