Abstract:In a laser, the control of its spectral emission depends on the physical dimensions of the optical resonator, limiting it to a set of discrete cavity modes at specific frequencies. Here, we overcome this fundamental limit by demonstrating a monolithic semiconductor laser with a continuously tunable repetition rate from 4 up to 16 GHz, by employing a microwave driving signal that induces a spatiotemporal gain modulation along the entire laser cavity, generating intracavity mode-locked pulses with a continuously tunable group velocity. At the output, frequency combs with continuously tunable mode spacings are generated in the frequency domain, and coherent pulse trains with continuously tunable repetition rates are generated in the time domain. Our results pave the way for fully tunable chip-scale lasers and frequency combs, advantageous for use in a diverse variety of fields, from fundamental studies to applications such as high-resolution and dual-comb spectroscopy.

What problem does this paper attempt to address?

### The problems the paper attempts to solve This paper aims to overcome the problem in traditional lasers that the control of spectral emission is limited by the physical size of the optical resonator. Specifically, the repetition rate ($f_{\text{rep}}$) of traditional lasers is restricted by the resonator length $L$, causing them to operate only at specific discrete cavity - mode frequencies. This limits the flexibility and performance of lasers in certain applications. #### Main problems 1. **Limitations of traditional lasers**: - The repetition rate of traditional lasers $f_{\text{rep}}=\frac{c}{2n_gL}$, where $c$ is the speed of light in vacuum, $n_g$ is the group refractive index, and $L$ is the resonator length. - This dependence on the physical size of the resonator makes the repetition rate change only in discrete modes and cannot be continuously tunable. 2. **The need for continuously tunable repetition rate**: - In many application scenarios, such as high - resolution spectroscopy, dual - comb spectroscopy, etc., lasers with continuously tunable repetition rates are required. - Traditional methods (such as changing the cavity length or the dielectric constant of materials) can only provide a limited discrete adjustment range and are difficult to meet the actual needs. #### Solutions To overcome the above limitations, the author proposes a new type of monolithic semiconductor laser, which realizes the continuous tunability of the repetition rate by introducing a microwave - driven signal. The specific methods are as follows: - **Space - time gain modulation**: Use the microwave - driven signal to generate space - time gain modulation along the entire laser cavity, generating intracavity mode - locked pulses with continuously tunable group velocities. - **Continuously tunable frequency comb**: Generate a frequency comb with continuously tunable mode spacing in the frequency domain and a coherent pulse sequence with continuously tunable repetition rate in the time domain. Through this method, the laser is no longer limited to the traditional longitudinal cavity modes and can excite any discrete laser frequency, thereby realizing a fully tunable chip - level laser and frequency comb. #### Experimental platform and results - **Experimental platform**: Use a broadband planar terahertz quantum - cascade laser (THz QCL) to achieve space - time gain modulation by injecting a microwave signal. - **Experimental results**: A continuously tunable repetition rate from 4 GHz to 16 GHz is achieved, and the corresponding relative tuning range reaches 400%. The experimental results are highly consistent with the numerical simulations, verifying the effectiveness of this method. In summary, this paper successfully solves the problem that the repetition rate of traditional lasers is limited by the physical size of the resonator by introducing the space - time gain modulation technology, paving the way for the realization of fully tunable chip - level lasers and frequency combs.

Continuously tunable coherent pulse generation in semiconductor lasers

Octave-spanning semiconductor laser

Simple and Compact Tunable Semiconductor Lasers Based on Novel Half-Wave Coupler

40Nm Quasi-Continuous Wavelength Tuning of V-cavity Semiconductor Laser

Simple and Compact V-cavity Semiconductor Laser with 50×100 GHz Wavelength Tuning.

Tunable V-Cavity Semiconductor Laser And Modules

Quasi-Continuous Wavelength Tuning of Single-mode Interband Cascade Lasers Based on V-coupled Cavity

Modeling of Widely Tunable V-cavity Semiconductor Laser Using Time-Domain Traveling-Wave Method

Electro-optically Tunable Microwave Source Based on Composite-Cavity Microchip Laser

Tunable Coupled-Cavity Semiconductor Laser Based on a Half-Wave Bow-Tie Coupler

Double Half-Wave-Coupled Rectangular Ring-Fp Laser With 35x100ghz Wavelength Tuning

Narrow Linewidth Tunable V-cavity Laser Using Self-Injection Method

Integrated Mode-Hop-Free Tunable Lasers at 780 nm for Chip-Scale Classical and Quantum Photonic Applications

Integrated femtosecond pulse generator on thin-film lithium niobate

Optical frequency comb generation from a monolithic microresonator

Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation

Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens

Generating octave-bandwidth soliton frequency combs with compact, low-power semiconductor lasers

Laser Soliton Microcombs Heterogeneously Integrated on Silicon

Frequency-modulated combs via on-chip field enhancement

Gigahertz Self-referenceable Frequency Comb from a Semiconductor Disk Laser