Abstract:Unmanned aerial vehicles (UAVs) are gaining widespread use in wireless relay systems due to their exceptional flexibility and cost-effectiveness. This paper focuses on the integrated design of UAV trajectories and the precoders at both the transmitter and UAV in a UAV-assisted relay communication system, accounting for transmit power constraints and UAV flight limitations. Unlike previous works that primarily address multiple-input single-output (MISO) systems with Gaussian inputs, we investigate a more realistic scenario involving multiple-input multiple-output (MIMO) systems with finite-alphabet inputs. To tackle the challenging and inherently non-convex problem, we propose an efficient solution algorithm that leverages successive convex approximation and alternating optimization techniques. Simulation results validate the effectiveness of the proposed algorithm, demonstrating its capability to optimize system performance.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: in a multi - input multi - output (MIMO) unmanned aerial vehicle (UAV) - assisted relay communication system, design the UAV trajectory and precoder to maximize the average information rate from the base station (BS) to the ground user (GU). Specifically, the research focuses on finite - alphabet input signals (such as PSK and QAM modulation), rather than the traditional Gaussian input signals, and takes into account the transmit power limitations and UAV flight limitations. ### Problem Background and Challenges 1. **Limitations of Existing Research**: - Existing research mainly focuses on multi - input single - output (MISO) systems and assumes that the input signals are Gaussian - distributed. - In actual communication systems, finite - alphabet input signals (such as PSK, QAM, etc.) are usually used, and these signals do not conform to the Gaussian distribution. - The MIMO system is more in line with practical application scenarios, but its optimization problem is more complex. 2. **Research Objectives of This Paper**: - For the MIMO UAV - assisted relay system, design a method for jointly optimizing the UAV trajectory and precoder. - Under the given transmit power constraints and UAV flight limitations, maximize the average information rate from the base station to the ground user. ### Main Contributions 1. **Fill the Literature Gap**: - This paper is the first to study the finite - alphabet input signal transmission design in the MIMO UAV - assisted relay system, and solves the practical problems not involved in the existing literature. 2. **Propose an Effective Solution**: - Propose an effective algorithm based on the alternating optimization (AO) and successive convex approximation (SCA) methods. - Decompose the overall optimization problem into a precoder optimization sub - problem and a UAV trajectory optimization sub - problem, and derive convex approximations through theoretical analysis to solve these problems independently. 3. **Verify the Effectiveness of the Algorithm**: - Verify the effectiveness of the proposed algorithm through extensive simulation results, and show its performance optimization ability under actual signal constraints. ### Mathematical Model and Formulas The key formulas involved in the paper include: - Information rate expressions: \[ \bar{I}_U(x_B(n); y_U(n)) = N_t\log_2\rho-\frac{1}{\rho}\sum_{m = 1}^{N_t}\mathbb{E}_{n_U(n)}\left[\log_2\left(\sum_{k = 1}^{N_t}\exp\left(-z_{Um_k}(n)\right)\right)\right] \] \[ \bar{I}_G(x_U(n); y_G(n)) = N_u\log_2\rho-\frac{1}{\rho}\sum_{m = 1}^{N_u}\mathbb{E}_{n_G(n)}\left[\log_2\left(\sum_{k = 1}^{N_u}\exp\left(-z_{Gm_k}(n)\right)\right)\right] \] - Average information rate: \[ R_{avg}=\min\left(R_U, R_G\right) \] where, \[ R_U=\frac{1}{T}\sum_{n = 0}^{N + 1}\delta tI_U(x_B(n); y_U(n)) \] \[ R_G=\frac{1}{T}\sum_{n = 0}^{N + 1}\delta tI_G(x_U(n); y_G(n)) \] ### Optimization Problem Description The objective of the optimization problem is to maximize the average information rate \(R_{avg}\) under the following constraint conditions: \[ \begin{aligned} &\max_{w, v, a, P_B, P_U}R_{avg}\\ &\text{s.t.}\quad\text{Tr}(P_B^H(n)P_B(n))\leq W_B \end{aligned} \]

Integrated Precoder and Trajectory Design for MIMO UAV-Assisted Relay System With Finite-Alphabet Inputs

Communication and Trajectory Design in UAV-enabled Flying Network.

Poster Abstract: Iterative Trajectory Optimization for Dual-UAV Secure Communications

Joint Resource Allocation and Trajectory Optimization for UAV-Aided Relay Networks

Joint Trajectory and Passive Beamforming Design for Secure UAV Networks with RIS

Relay Hybrid Precoding in UAV-Assisted Wideband Millimeter-Wave Massive MIMO System

Low-Complexity Joint Resource Allocation and Trajectory Design for UAV-Aided Relay Networks With the Segmented Ray-Tracing Channel Model

Joint Trajectory and Communication Design for Multi-UAV Enabled Wireless Networks

Multi-UAV Trajectory Design for Fair and Secure Communication

Trajectory Optimization and Resource Allocation for OFDMA UAV Relay Networks

Model Predictive Control Enabled UAV Trajectory Optimization and Secure Resource Allocation

Interpretable and Secure Trajectory Optimization for UAV-Assisted Communication

The Transmission Scheme for UAV MIMO System Based on Reinforcement Learning

3D UAV Trajectory and Communication Design for Simultaneous Uplink and Downlink Transmission

UAV Relaying: Power Allocation and Trajectory Optimization Using Decode-and-Forward Protocol

Robust 3D-Trajectory and Time Switching Optimization for Dual-UAV-Enabled Secure Communications

Wireless Surveillance in a MIMO System with Spoofing Relay and UAV-enabled Eavesdropper

UAV Trajectory Optimization for Joint Relay Communication and Image Surveillance

Reconfigurable Intelligent Surface Assisted UAV Communication: Joint Trajectory Design and Passive Beamforming

Radar Probing Optimization for Joint Beamforming and UAV Trajectory Design in UAV-Enabled Integrated Sensing and Communication

Join trajectory optimization and communication design for UAV-enabled OFDM networks