A Practical Example of the Impact of Uncertainty on the One-Dimensional Single-Diode Model

Carlos Cárdenas-Bravo,Sylvain Lespinats,Denys Dutykh

DOI: https://doi.org/10.1109/ISSE63315.2024.10741111

2024-11-07

Abstract:The state of health of solar photovoltaic (PV) systems is assessed by measuring the current-voltage (I-V) curves, which present a collection of three cardinal points: the short-circuit point, the open-circuit point, and the maximum power point. To understand the response of PV systems, the I-V curve is typically modeled using the well-known single-diode model (SDM), which involves five parameters. However, the SDM can be expressed as a function of one parameter when the information of the cardinal points is incorporated into the formulation. This paper presents a methodology to address the uncertainty of the cardinal points on the parameters of the single-diode model based on the mathematical theory. Utilizing the one-dimensional single-diode model as the basis, the study demonstrates that it is possible to include the uncertainty by solving a set of nonlinear equations. The results highlight the feasibility and effectiveness of this approach in accounting for uncertainties in the SDM parameters.

Numerical Analysis

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to consider the influence of uncertainty in the single - diode model (SDM), especially in the one - dimensional single - diode model (SDM - 1). Specifically, the paper focuses on the influence of the uncertainty of the three key points (short - circuit point, open - circuit point and maximum power point) of the current - voltage (I - V) curve in solar photovoltaic (PV) systems on SDM parameters.

### Main problem decomposition:

1. **Sources of uncertainty**:
- The paper points out that in the photovoltaic field, there are three main sources of uncertainty: I - V curve measurement, irradiance level and array temperature. These uncertainties will propagate through the measurement process and affect the accuracy of current and voltage measurements.

2. **Single - diode model (SDM)**:
- SDM is usually described by five parameters: photocurrent \( I_{ph} \), dark saturation current \( I_o \), equivalent factor \( A \), shunt resistance \( R_{sh} \) and series resistance \( R_s \). These parameters can be determined by optimization tools.

3. **One - dimensional single - diode model (SDM - 1)**:
- When the information of the three key points is incorporated into SDM, SDM can be represented as an implicit function and can be expressed by one parameter. This representation method is called the one - dimensional single - diode model (SDM - 1). Although the optimal parameters cannot be directly obtained from this representation, the parameter domains of all five parameters can be calculated so that they are all positive.

4. **Influence of uncertainty**:
- The author proposes a method based on mathematical theory to include uncertainty by solving a set of nonlinear equations. The research results show that this method can effectively deal with the uncertainty in SDM parameters.

### Formula representation:

- Shockley equation of an ideal diode:
\[
I_d = I_o \left( \exp\left(\frac{q V_j}{n N_s k_B T_{pv}}\right) - 1 \right)
\]
where:
- \( I_o \) is the dark saturation current of the diode
- \( n \) is the non - ideal factor of the diode
- \( N_s \) is the number of solar cells connected in series
- \( T_{pv} \) is the temperature of the photovoltaic system (unit: K)
- \( V_j \) is the junction voltage across the diode (unit: V)
- \( q \) is the elementary charge, \( q = 1.602\times 10^{-19}\, \text{C} \)
- \( k_B \) is the Boltzmann constant, \( k_B = 1.380649\times 10^{-23}\, \text{J/K} \)

- Definition of equivalent factor \( A \):
\[
A=\frac{n N_s k_B T_{pv}}{q}
\]

- Definition of shunt conductance \( G_{sh} \):
\[
G_{sh}=\frac{1}{R_{sh}}
\]

- Expression of single - diode model:
\[
I_{ph} = I_o \left( \exp\left(\frac{V_j}{A}\right) - 1 \right)+G_{sh} V_j + I_{pv}
\]
where:
\[
V_j = V_{pv}+R_s I_{pv}
\]

### Conclusion:

By introducing mathematical theory and solving nonlinear equations, the paper successfully solves the uncertainty problem in SDM parameters. The research results show that this method is not only feasible but also effective and can better understand and predict the performance of photovoltaic systems. Future research can be further extended to more types of models and more complex conditions to enhance the robustness of the analysis.