Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given

Solute diffusion calculation in Fe-Si and Fe-Cr-Si multicomponent alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Atomistic simulations of carbon diffusion and segregation in liquid silicon

Interdiffusion of solute elements in the α-Fe phase of the Fe–Cr–Mo and Fe–Cr–Si ternary systems

Sluggish and Chemically-Biased Interstitial Diffusion in Concentrated Solid Solution Alloys: Mechanisms and Methods

An experimental estimation method of diffusion coefficients in ternary and multicomponent systems from a single diffusion profile

Interdiffusion in the FCC-structured Al-Co-Cr-Fe-Ni High Entropy Alloys: Experimental Studies and Numerical Simulations

Solute diffusion by self-interstitial defects and radiation-induced segregation in ferritic Fe-X (X=Cr, Cu, Mn, Ni, P, Si) dilute alloys

An Experimental Estimation Method of Diffusion Coefficients in Ternary and Multicomponent Systems from a Single Diffusion Couple Profile

Simulation for microstructure evolution of Al-Si alloys in solidification process

Solving the issues of multicomponent diffusion in an equiatomic NiCoFeCr medium entropy alloy

Master equation approach to the theory of diffusion in alloys and calculations of enhancement factors for tracer solvent and tracer solute diffusion in FCC alloys

A Kinetic Model of Diffusional Phase Transformations in Ternary Line Compounds and Determination of Diffusion Coefficients: Application to the Nb–Mo–Si System

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Interdiffusion cross-high-entropy alloys, nano-multilayer foils, and Al interface: An atomistic simulation

Atomistic modeling of metal-nonmetal interphase boundary diffusion

Atomistically Informed Phase Field Modeling of Solid-Solid Phase Transformations

Diffusion Coefficients of the Ni-Co-Fe Alloys Studied by Molecular Dynamics Simulation and CALPHAD Assessment

Diffusion in Ni-Based Single Crystal Superalloys with Density Functional Theory and Kinetic Monte Carlo Method