MXene/Polylactic Acid Fabric-Based Resonant Cavity for Realizing Simultaneous High-Performance Electromagnetic Interference (EMI) Shielding and Efficient Energy Harvesting

Ziran Du,Gaoyan Zhang,Kun Chen,Cheng Zhou,Xiaoshuai Zhu,Yuxiang Zhang,Kang Chen,Hao-Yang Mi,Yaming Wang,Chuntai Liu,Changyu Shen
DOI: https://doi.org/10.1021/acsami.2c01160
2022-03-17
Abstract:Proliferation in telecommunications and integrated/intelligent devices entails an intense concern for electromagnetic interference (EMI) shielding and versatility. It remains an activated passion to launch infusive EMI shielding materials integrated with self-powered peculiarities. Herein, a double-layered MXene/polylactic acid (PLA) fabric resonance cavity (D-MPF-RC) comprised of two MXene/PLA fabrics (MPFs) with alternating MXene and PLA structures that are separated by a poly(tetrafluoroethylene) (PTFE) frame is developed. The D-MPF-RC achieved 48.5 and 74.8% improvement in SET and SEA, and 24.6% reduction in SER by introducing the double-layered structure and increasing the resonance cavity (RC) distance without varying the material composition and cost. A high shielding efficiency (SE) of 92.3 dB was obtained at an RC distance of 6 mm owing to the synergetic effects of multiple reflections and destructive EM wave interference. The tribopolarity difference between PLA and MXene and the RC structure made the D-MPF-RC a readily available triboelectric nanogenerator (TENG) that could convert mechanical energy into electricity. The D-MPF-RC TENG demonstrated an open-circuit voltage of 88 V and achieved a peak power density of 35.4 mW m–2 on a 6.6 MΩ external resistor, which made it possible to charge capacitors and serve as a self-powered tactile sensor. This report offers new insights into the design of high-performance EMI shielding shields with a resonance cavity and proposes a feasible pathway to integrate them with energy harvesting capabilities.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01160.EMI SE calculations and the transfer-matrix method (TMM); XRD patterns of Ti3AlC2 and Ti3C2Tx, and SEM, TEM, and AFM images of Ti3C2Tx; SEM images of PLA fabrics and MPFs; sheet resistance of MPFs; SER and SEA of S-MPFs and D-MPFs; mechanical stability of MPFs; calculated SET of MPF-RCs with various distances and frequency of 1–200 GHz and the calculated ΔSET; XPS spectrum of Ti3C2Tx and FTIR spectra of PLA and Ti3C2Tx; and related tables (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?