FilMBot: A High-Speed Soft Parallel Robotic Micromanipulator

Jiangkun Yu,Houari Bettahar,Hakan Kandemir,Quan Zhou

2024-10-30

Abstract:Soft robotic manipulators are generally slow despite their great adaptability, resilience, and compliance. This limitation also extends to current soft robotic micromanipulators. Here, we introduce FilMBot, a 3-DOF film-based, electromagnetically actuated, soft kinematic robotic micromanipulator achieving speeds up to 2117 $°$/s and 2456 $°$/s in $\alpha$ and $\beta$ angular motions, with corresponding linear velocities of 1.61 m/s and 1.92 m/s using a 4-cm needle end-effector, and 1.57 m/s along the Z axis. The robot can reach ~1.50 m/s in path-following tasks, operates at frequencies up to 30 Hz, and remains functional up to 50 Hz. It demonstrates high precision (~6.3 $\mu$m, or ~0.05% of its workspace) in small path-following tasks. The novel combination of the low-stiffness soft kinematic film structure and strong electromagnetic actuation in FilMBot opens new avenues for soft robotics. Furthermore, its simple construction and inexpensive, readily accessible components could broaden the application of micromanipulators beyond current academic and professional users.

Robotics

What problem does this paper attempt to address?

This paper attempts to solve the problems of limitations in speed and precision of soft robotic micromanipulators. Specifically:

1. **Speed problem**: Traditional soft robotic micromanipulators generally have the problem of slow speed, although they have good adaptability, elasticity and compliance. This restricts their use in dynamic applications.

2. **Precision problem**: Although some soft robotic micromanipulators can achieve high precision, their precision is often affected when moving at high speed, and it is difficult to meet the requirements of high - precision dynamic tasks.

3. **Limited application range**: Due to the above - mentioned limitations in speed and precision, the applications of soft robotic micromanipulators are mainly concentrated in academic research and professional fields, and have not been widely used in practical scenarios such as industry and medical treatment.

To solve these problems, the author proposes a new 3 - DOF (3 - Degrees of Freedom) film - based, electromagnetically - driven soft robotic micromanipulator named FilMBot. The main features of FilMBot include:

- **High speed**: FilMBot can reach speeds of 2117 °/s and 2456 °/s in α and β angle movements respectively, and the linear speeds can reach 1.61 m/s and 1.92 m/s (using a 4 - centimeter - long needle - tip end - effector), and the speed in the Z - axis direction is 1.57 m/s.

- **High precision**: In small - path - following tasks, the precision of FilMBot is approximately 6.3 μm, which is equivalent to 0.05% of its workspace size.

- **High - frequency response**: FilMBot can operate at frequencies as high as 30 Hz and can still maintain its function at a frequency of 50 Hz.

By combining the low - stiffness soft structure and powerful electromagnetic drive, FilMBot not only achieves high speed and high precision, but also simplifies the construction and reduces the cost, thus being expected to expand the applications of soft robotic micromanipulators to a wider range of fields.