Electrode SOC and SOH estimation with electrode-level ECMs

Iker Lopetegi,Sergio Fernandez,Gregory L. Plett,M. Scott Trimboli,Unai Iraola
2024-10-22
Abstract:Being able to predict battery internal states that are related to battery degradation is a key aspect to improve battery lifetime and performance, enhancing cleaner electric transportation and energy generation. However, most present battery management systems (BMSs) use equivalent-circuit models (ECMs) for state of charge (SOC) and state of health (SOH) estimation. These models are not able to predict these aging-related variables, and therefore, they cannot be used to limit battery degradation. In this paper, we propose a method for electrode-level SOC (eSOC) and electrode-level SOH (eSOH) estimation using an electrode-level ECM (eECM). The method can produce estimates of the states of lithiation (SOL) of both electrodes and update the eSOH parameters to maintain estimation accuracy through the lifetime of the battery. Furthermore, the eSOH parameter estimates are used to obtain degradation mode information, which could be used to improve state estimation, health diagnosis and prognosis. The method was validated in simulation and experimentally.
Systems and Control
What problem does this paper attempt to address?
The problem this paper attempts to address is: How to estimate the state of charge (eSOC) and state of health (eSOH) of battery electrodes using an electrode-level equivalent circuit model (eECM) to predict internal states related to battery aging, thereby improving battery life and performance. ### Problem Background Currently, most battery management systems (BMS) use equivalent circuit models (ECM) to estimate the state of charge (SOC) and state of health (SOH) of batteries. However, these models cannot predict variables related to aging and therefore cannot be used to limit battery degradation. This limits their effectiveness in practical applications, especially in the fields of clean energy transportation and energy generation. ### Solution The paper proposes a method based on an electrode-level equivalent circuit model (eECM) to estimate the state of charge (eSOC) and state of health (eSOH) at the electrode level. Specifically, this method can: 1. **Estimate the state of lithiation (SOL)**: Estimate the state of lithiation for both the positive and negative electrodes separately. 2. **Update eSOH parameters**: Maintain estimation accuracy by updating eSOH parameters, thereby ensuring accurate estimates throughout the battery's lifespan. 3. **Obtain degradation mode information**: Use the estimated eSOH parameters to obtain degradation mode information, which can be used to improve state estimation, health diagnosis, and prediction. ### Method Validation The method has been validated through simulations and experiments, showing that it can effectively estimate the SOC and SOH at the electrode level and maintain high estimation accuracy during battery aging. ### Key Contributions 1. **First joint estimation of eSOH parameters and eSOC**: Using the eECM model, all eSOH parameters and eSOC are estimated without the need for low current tests or additional sensors. 2. **Proposed a new parameterization method**: Considered a larger range of electrode lithiation, not just the commonly considered SOC range. 3. **Obtained degradation mode values**: Used the eECM model to obtain degradation mode values, which are crucial for battery diagnostics and prediction. ### Summary This paper addresses the issue of current battery management systems (BMS) being unable to predict internal states related to battery aging by proposing a method based on an electrode-level equivalent circuit model (eECM). This method improves battery life and performance and has been validated through simulations and experiments, showing good results.