Abstract:We have been developing a novel interferometer formed directly between a Very Long Baseline Interferometry (VLBI) radio telescope and a Global Navigation Satellite Systems (GNSS) antenna/receiver. This interferometer is enabled by the High Rate Tracking Receiver (HRTR), a high-performance GNSS software-defined receiver that records baseband data similar to a VLBI receiving system. Of particular interest is the potential of the technique to produce precise local tie vectors directly between the geodetic reference points of VLBI and GNSS antennas for use in the determination of combination terrestrial reference frames. In this paper, we will describe the unique setup of this interferometer before discussing current developmental work in estimating local tie vectors from experimental data collected using this technique. In particular, much recent work has been in exploring the possibility of direct comparison of the GNSS and VLBI processing techniques. A significant advantage of GNSS-VLBI co-observation of GNSS satellites comes from the ability to cross-check position and clock estimates derived from differential measurements in VLBI-style processing with differential GNSS processing and absolute GNSS positioning with Precise Point Positioning (PPP). We show a preliminary VLBI analysis of interferometric data including a differential positioning solution using phase delays.

What problem does this paper attempt to address?

The paper attempts to address the problem of directly generating local tie vectors through geodetic techniques (such as GNSS and VLBI) to improve the accuracy and reliability of these vectors. ### Background Traditional local tie vectors are usually determined through optical measurement methods, which use a total station to align with reflectors mounted on space geodetic instruments. However, the total station measures the position of the optical reflectors, not the geodetic reference points, thus requiring additional models or transformations to achieve local tie vectors. The accuracy of this transformation is difficult to verify. ### Solution The authors propose a new method to directly generate local tie vectors through geodetic techniques (such as interferometric VLBI processing or pseudorange and carrier phase measurements of GNSS satellite signals). Specifically, they utilize data processing techniques between GNSS antennas and VLBI radio telescopes to map the geodetic results of radio frequency hardware to geodetic reference points. This method can use the same models and analysis techniques as conventional GNSS and VLBI processing, allowing direct comparison of the results of the two techniques to identify systematic biases. ### Experimental Setup The experiment was conducted on January 25, 2023, at the VLBA radio telescope in Fort Davis, Texas, USA. Two Topcon CR-G5 GNSS antennas were deployed, one approximately 70 meters from the VLBA telescope and the other about 9 kilometers away. Both GNSS antennas received frequency standard signals from a hydrogen maser clock. Through these devices, they observed 19 GNSS satellites, including GPS, Galileo, and BeiDou satellite systems. ### Data Processing 1. **GNSS Processing**: By correlating GNSS satellite signals with locally replicated pseudorandom noise (PRN) codes, pseudorange and carrier phase observations are obtained. These observations are used for precise point positioning (PPP) or precise differential positioning (PDP) to obtain high-precision positions and clock offsets for each GNSS antenna in the International Terrestrial Reference Frame (ITRF). 2. **VLBI Processing**: Through steps such as software correlation (DiFX), phase fitting (PIMA), and parameter estimation (Solve), the differential position and clock function between the GNSS antennas and the VLBI radio telescope are estimated, resulting in the local tie vectors. ### Results Preliminary results show that the local tie vectors generated by this method have high accuracy, with an uncertainty in position estimation of about 1 centimeter. Although the reliability of the solution cannot be fully assessed at this time, these preliminary results are very encouraging, indicating that the technology may have many useful applications. ### Future Work 1. Collect longer time series of geodetic observation data and use fixed reference GNSS antenna positions to reduce uncertainty. 2. Analyze the repeatability of local tie vectors to obtain more reliable methods for assessing local tie accuracy. 3. Investigate the impact of L-band feed on the results, as this differs from traditional S/X-band feed. In summary, the paper proposes a new method to generate high-precision local tie vectors by combining GNSS and VLBI techniques, which is of great significance for geodesy and the establishment of the terrestrial reference frame.

Extracting Geodetic Data from GNSS-VLBI Co-Observation

First observations with a GNSS antenna to radio telescope interferometer

An instrument to link global positioning to the Universe -- Observing GNSS satellites with the Australian VLBI array

VLBI analyses with the GINS software for multi-technique combination at the observation level

A Geodetic and Astrometric VLBI Experiment at 22/43/88/132 GHz

Measuring 1-mm-accurate local survey ties over kilometer baselines at McDonald Geodetic Observatory

A broadband VLBI system using transportable stations for geodesy and metrology: an alternative approach to the VGOS concept

Optimal distribution of VLBI transmitters in the Galileo space segment for frame ties

On the Integration of VLBI Observations to GENESIS into Global VGOS Operations

First Use of GPS Satellites for Beam Calibration of Radio Telescopes

Ionosphere-Weighted Network Real-Time Kinematic Server-Side Approach Combined with Single-Differenced Observations of GPS, GAL, and BDS

GNSS Differential Interferometer

Resolving VLBI correlator ambiguity in the time delay model improves precision of geodetic measurements

Coherent Combination of GPS III L1 C/A and L1C Signals for GNSS Reflectometry

GINS: a new tool for VLBI Geodesy and Astrometry

Evaluating the feasibility of short-integration scans based on the 2022 VGOS-R&D program

Towards an astronomical use of new-generation geodetic observations. I. From the correlator to full-polarization images

Near real-time astrometry for spacecraft navigation with the VLBA: A demonstration with the Mars Reconnaissance Orbiter and Odyssey

Long-Baseline Real-Time Kinematic Positioning: Utilizing Kalman Filtering and Partial Ambiguity Resolution with Dual-Frequency Signals from BDS, GPS, and Galileo

Using PPP Information to Implement a Global Real-Time Virtual Network DGNSS Approach