GBSense: A GHz-Bandwidth Compressed Spectrum Sensing System

Zihang Song,Xingjian Zhang,Zhe Chen,Rahim Tafazolli,Yue Gao
2024-10-19
Abstract:This paper presents GBSense, an innovative compressed spectrum sensing system designed for GHz-bandwidth signals in dynamic spectrum access (DSA) applications. GBSense introduces an efficient approach to periodic nonuniform sampling, capturing wideband signals using significantly lower sampling rates compared to traditional Nyquist sampling. By integrating time-interleaved analog-to-digital conversion, GBSense overcomes the hardware complexity typically associated with traditional multicoset sampling, providing precise, real-time adjustable sampling patterns without the need for analog delay circuits. The system's ability to process signals with a 2 GHz radio frequency bandwidth using only a 400 MHz average sampling rate enables more efficient spectrum monitoring and access in wideband cognitive radios. Lab tests demonstrate 100\% accurate spectrum detection when the spectrum occupancy is below 100 MHz and over 80\% accuracy for occupancy up to 200 MHz. Additionally, an integrated system utilizing a low-power Raspberry Pi processor achieves a low processing latency of around 30 ms per frame, demonstrating the system's potential for real-time applications in cognitive radio networks, 5G, and future 6G infrastructures.
Signal Processing
What problem does this paper attempt to address?
### What problems does this paper attempt to solve? This paper aims to solve the challenge of efficient spectrum sensing for GHz - bandwidth signals in Dynamic Spectrum Access (DSA) applications. Specifically, traditional Nyquist sampling methods face the following problems when dealing with broadband signals: 1. **High Sampling Rate Requirement**: According to the Nyquist sampling theorem, in order to accurately reconstruct a signal, the sampling rate must be at least twice the highest frequency of the signal. For a signal with a GHz - bandwidth, this means an extremely high sampling rate is required, which not only increases hardware complexity but also leads to a significant increase in power consumption and cost. 2. **Hardware Complexity**: Traditional multicoset sampling methods rely on analog delay circuits to achieve non - uniform sampling, but these circuits are difficult to precisely control the delay time and are easily affected by noise and circuit imperfections, thus limiting their practicality and flexibility. 3. **Real - Time Processing Capability**: In practical applications, especially in cognitive radio networks, 5G and future 6G infrastructures, efficient real - time spectrum monitoring and access are required. Traditional methods are difficult to meet this real - time processing requirement. To solve these problems, this paper proposes the GBSense system, a spectrum sensing system based on Compressed Sensing (CS) technology, with the following characteristics: - **Periodic Nonuniform Sampling (PNS)**: Through Time - Interleaved Analog - to - Digital Conversion (TI - ADC), GBSense achieves efficient and flexible non - uniform sampling, avoiding the complex analog delay circuits in traditional methods. - **Low Sampling Rate**: GBSense can use an average sampling rate of only 400 MHz when processing a 2 - GHz radio - frequency - bandwidth signal, greatly reducing the data transmission burden and power consumption. - **Real - Time Processing**: Combined with a low - power Raspberry Pi processor, GBSense achieves a low processing delay of about 30 milliseconds, demonstrating its potential in real - time applications such as cognitive radio networks. In conclusion, the GBSense system significantly improves the efficiency and real - time performance of spectrum sensing through innovative sampling techniques and hardware design, while reducing hardware complexity and power consumption, and is suitable for Dynamic Spectrum Access applications in modern wireless networks.