Abstract:Plenoptic cameras have been increasingly applied in three-dimensional (3D) optical imaging and measurements. Micro-lens array is the key component to capture the images at different depths simultaneously to realize the 3D reconstruction of the scenery. However, only a part of the captured information will be used eventually when focusing on specific objects, which implies a waste of time and resources that are incompetent for fast-response tasks like gesture recognition. Furthermore, it is still quite challenging to accurately calibrate the depths under complex circumstances, even sometimes losing a part of the target information due to the low signal-to-noise ratio. In this paper, a new hybrid optical system is developed combining a geometrical waveguide and micro-lens array to project a virtual scale network for quantitative depth calibration and fast-tracking of targets. Such a methodology based on the augmented reality (AR) mechanism helps to rapidly scope the targeted objects/features without reconstructing the full range model, significantly saving the processing time for a low-latency response. By establishing a geometrical model to quantitatively correlate the images in the auxiliary coordinate system and the virtual scale coordinate system, the depth error caused by the plenoptic camera can be calibrated and corrected. The coefficient of determination R 2 is used to evaluate the depth accuracy of 3D images and acts as the threshold to control the depth correction iterations. The closer the value of R 2 is to 1, the more accurate the depth information is. Experiments proved that even under complex backgrounds or insufficient light, in virtue of the virtual coordinate networks, backgrounds could be rapidly filtered, and targets were effectively identified with accurate depth information. The algorithm flow chart for the correction of depth error is given. In such a way, the system can achieve faster and more accurate capturing of 3D objects in a real-time manner than conventional plenoptic cameras.

Color-Guided Flying Pixel Correction in Depth Images

DoCam: Depth Sensing with an Optical Image Stabilization Supported RGB Camera.

Guided depth enhancement via a fast marching method

DELTAR: Depth Estimation from a Light-Weight ToF Sensor and RGB Image

Iterative Error Removal for Time-of-Flight Depth Imaging

DeepToF: Off-the-Shelf Real-Time Correction of Multipath Interference in Time-of-Flight Imaging

Depth Errors Analysis and Correction for Time-of-Flight (tof) Cameras.

FloatingFusion: Depth from ToF and Image-stabilized Stereo Cameras

Deep End-to-End Alignment and Refinement for Time-of-Flight RGB-D Module

Depth error correction for plenoptic cameras based on an innovative AR system combining geometrical waveguide and micro-lens array

High-Resolution Depth Maps Based on TOF-Stereo Fusion

Depth map enhancement based on color and depth consistency

Defogging Kinect: Simultaneous Estimation of Object Region and Depth in Foggy Scenes

MPI Planar Correction of Pulse Based ToF Cameras

Depth Error Elimination for RGB-D Cameras

A Learning Method To Optimize Depth Accuracy And Frame Rate For Time Of Flight Camera

All Pixels Calibration for ToF Camera

RGB Guided ToF Imaging System: A Survey of Deep Learning-Based Methods

VoxDepth: Rectification of Depth Images on Edge Devices

Robust High Quality Image Guided Depth Upsampling