Abstract:A new beam element only having the translational displacement degrees of freedom is developed to analyze fracture and buckling behaviors of bilayer beams or columns with delamination using the multilayer modeling method. By comparing their degrees of freedom, it is found that the present beam element is equivalent to the conventional Timoshenko beam element. The upper and lower layers are both divided into one or several sublayers, which are modeled by the developed beam elements. The element stiffness matrix, load vector, and geometric stiffness matrix using the linear interpolation polynomial are derived by the principle of minimum potential energy. To illustrate the effectiveness, accuracy, and efficiency, both the fracture and buckling analyses are conducted. Four typical fracture specimens (i.e., homogeneous and asymmetric double cantilever beams, single leg bending, and asymmetric end-notched flexure specimens) are analyzed using the developed beam element, and the obtained energy release rate and its components using the virtual crack closure technique are compared with those of analytical and conventional two-dimensional (2D) finite element solutions. Further, buckling analysis of bilayer beam-columns with delamination is conducted, focusing on the effect of the number of sublayers. The results show that the developed beam element is capable of effectively and efficiently calculating the convergent stress intensity factor ratio, total energy release rate and its components, and critical buckling load of delaminated bilayer beams or columns with relatively few elements, but without introducing the interface continuity condition in comparison to the conventional modeling method.

On the Derivation of One and Two Dimensional Equations for Layered Elastic Beams and Plates with Interface Slips

Three-dimensional Elasticity Solutions for Bending of Generally Supported Thick Functionally Graded Plates

Exact Solution for Axisymmetric Deformation of Laminated Transversely Isotropic Annular Plates

Analysis of Composite Beams with Interlayer Slip

Coupled Extensional and Flexural Motions of a Two-Layer Plate with Interface Slip

2-D Elasticity Solutions of Two-Layer Composite Beams with an Arbitrarily Shaped Interface

2-D Elasticity Solution of Layered Composite Beams with Viscoelastic Interlayers

Extensional Waves in A Sandwich Plate with Interface Slip

Three-dimensional Elasticity Solution of Layered Plates with Viscoelastic Interlayers

Elasticity Solution for Free Vibration of Laminated Beams

Static Analysis of Thick Laminated Beams: Two-Dimensional Elasticity Solutions Via Differential Quadrature

Analysis of Elastic Layers with Dilative Eigenstrains Varying Through the Thickness

ON THE BENDING, VIBRATION AND STABILITY OF LAMINATED RECTANGULAR PLATES WITH TRANSVERSELY ISOTROPIC LAYERS

Two multilayered plate models with transverse shear warping functions issued from three dimensional elasticity equations

Asymptotic long-wave model for a high-contrast two-layered elastic plate

Multilayer Modeling of Delaminated Bilayer Beams and Its Application to Fracture and Buckling Analysis

Variational principles of laminated plates considering interlayer slip

Elasticity Solution of Two-Layer Beam with a Viscoelastic Interlayer Considering Memory Effect

Two-dimensional Thermoelasticity Solution for Functionally Graded Thick Beams

A Linear-Theory Of Laminated Shells Accounting For Continuity Of Displacements And Transverse-Shear Stresses At Layer Interfaces

Time-dependent behavior of laminated functionally graded beams bonded by viscoelastic interlayer based on the elasticity theory