Jieni Zhang,Yong Zeng,Xiangbin Yu,Shi Jin,Jinhong Yuan,Ying-Chang Liang,Rui Zhang
Abstract:For millimeter wave (mmWave) or Terahertz (THz) communications, by leveraging the high spatial resolution offered by large antenna arrays and the multi-path sparsity of mmWave/THz channels, a novel inter-symbol interference (ISI) mitigation technique called delay alignment modulation (DAM) has been recently proposed. The key ideas of DAM are delay pre-compensation and path-based beamforming. However, existing research on DAM is mainly based on fully digital beamforming, which requires the number of radio frequency (RF) chains to be equal to the number of antennas. This paper proposes the hybrid analog/digital beamforming based DAM, including both fully and partially connected structures. The analog and digital beamforming matrices are designed to achieve performance close to DAM based on fully digital beamforming. While DAM was considered for the path-based channel model with integer delays in the previous work, this paper extends DAM to a more general tap-based model that accounts for fractional path delays. To further reduce the cost of channel estimation and improve the performance for wireless channels with fractional delays, DAM with codebook-based beam alignment and DAM-orthogonal frequency division multiplexing (DAM-OFDM) with hybrid beamforming are proposed. The effectiveness of the proposed techniques is verified by extensive simulation results.
What problem does this paper attempt to address?
### What problem does this paper attempt to solve?
This paper aims to solve the inter - symbol interference (ISI) problem caused by multipath propagation in millimeter - wave (mmWave) and terahertz (THz) communication systems. Specifically, the paper proposes a delay - aligned modulation (DAM) technique based on hybrid analog/digital beamforming to achieve performance comparable to fully digital beamforming but with fewer radio - frequency (RF) links, thereby reducing hardware cost and power consumption.
#### Main problems:
1. **Challenges of ISI**: Multipath propagation in broadband communication systems can lead to time - delay dispersion, which in turn causes inter - symbol interference (ISI). This will reduce the overall performance of the system, resulting in signal distortion and a decline in data transmission reliability.
2. **Limitations of existing DAM techniques**: Previous DAM research was mainly based on fully digital beamforming, which requires the number of RF chains to be equal to the number of antennas, resulting in high hardware costs and power consumption.
3. **Handling of fractional path delays**: Traditional ISI suppression methods usually assume integer delays, while in the actual environment, multipath delays may be non - integer multiples of the sampling interval, so a more general model is required to handle fractional path delays.
#### Solutions in the paper:
- **DAM with hybrid analog/digital beamforming**: By combining analog and digital beamforming, reduce the number of required RF chains while maintaining performance close to that of fully digital beamforming.
- **Extension to fractional path delays**: Extend the DAM technique from a path - based channel model to a tap - based channel model to handle fractional path delays.
- **Codebook - based beam alignment**: In order to reduce the overhead and complexity of channel estimation, a codebook - based beam alignment method is proposed.
- **DAM - OFDM**: For channels with fractional delays, a DAM - OFDM method based on hybrid beamforming is proposed to further reduce the cyclic prefix (CP) length and alleviate the high PAPR problem.
### Formula summary:
1. **Received signal model**:
\[
y[n]=h_H^{DL}[n]*x[n]+z[n]=\sum_{l = 1}^L h_l^H x[n - n_l]+z[n]
\]
where \( h_l^H \) is the channel vector of the \( l\) - th multipath, \( n_l \) is the discretized delay, and \( z[n]\sim CN(0,\sigma^2)\) is the additive white Gaussian noise.
2. **DAM transmitted signal**:
\[
x[n]=F_{RF}F_{BB}\sum_{l = 1}^L f_{BB,l}s[n - \kappa_l]
\]
where \( F_{RF}\in\mathbb{C}^{M_t\times M_{RF}}\) is the analog beamforming matrix, \( F_{BB}\in\mathbb{C}^{M_{RF}\times L}\) is the digital baseband beamforming matrix, and \( \kappa_l \) is the introduced delay.
3. **Simplified received signal**:
\[
y[n]=\left(\sum_{l = 1}^L h_l^H F_{RF} f_{BB,l}\right)s[n - n_{\text{max}}]+z[n]
\]
4. **ISI - ZF beamforming condition**:
\[
h_l^H F_{RF} f_{BB,l'}=0,\quad\forall l'\neq l
\]
5. **Optimization problem**:
\[
\max_{F_{RF},F_{BB}}\log_2\left(1+\frac{1}{\sigma^2}\left\|\sum_{l = 1}^L h_l^H F_{RF} f_{BB,l}\right\|^2\right)
\]