Electrochemical removal of antibiotics and multidrug-resistant bacteria using S-functionalized graphene sponge electrodes

Natalia Ormeño Cano,Jelena Radjenovic

DOI: https://doi.org/10.1016/j.jclepro.2024.143245

2024-10-02

Abstract:In this study, we synthesized S functionalized graphene sponge electrode and applied it for electrochemical oxidation of five commonly used antibiotics, namely sulfamethoxazole, trimethoprim, ofloxacin, roxithromycin and erythromycin, and inactivation of a multidrug resistant Escherichia coli, E. coli. The experiments were performed using real drinking water in a flow through, one pass mode. Highly polar antibiotics such as sulfamethoxazole did not adsorb onto the graphene sponge but were completely removed, i.e., more than 95% removal, at low applied current densities, 14.5 A m2. Antibiotics with high affinity for pi pi interactions were completely removed already in the open circuit, and current application led to their further degradation. S doped graphene sponge anode resulted in 4.5 log removal of a multi-drug resistant E. coli at 29 A m2. There was no regrowth of bacteria observed during storage of the electrochemically treated samples, suggesting that the treatment severely impacted the cell viability. Further E. coli removal of 0.7 log was observed after the storage of electrochemically treated samples. The energy consumption of a continuously operated electrochemical system that achieved 4.5 log inactivation of a multidrug resistant E. coli and 87 to 99% removal of antibiotics was 1.1 kWh m3.

Biological Physics,Materials Science

What problem does this paper attempt to address?

The problems this paper attempts to address are: 1. **Removal of antibiotics and multi-drug resistant bacteria**: The study aims to develop an efficient method using S-functionalized graphene sponge electrodes (SRGO) to remove five commonly used antibiotics (sulfamethoxazole, trimethoprim, ofloxacin, erythromycin, and roxithromycin) and a multi-drug resistant Escherichia coli (E. coli) from drinking water through electrochemical oxidation. 2. **Challenges in low conductivity water treatment**: The research particularly focuses on the challenges faced during electrochemical treatment in low conductivity drinking water, such as the increased thickness of the electric double layer limiting the interaction between organic pollutants and the electrode surface. 3. **Chlorine-free disinfection technology**: The study also explores the potential of this electrochemical system as a chlorine-free disinfection method to avoid the toxic by-products (such as organochlorines, chlorates, and perchlorates) produced by traditional disinfection methods. 4. **Mechanism analysis of electrochemical treatment**: The research evaluates the roles of different oxidizing species (such as hydroxyl radicals, ozone, and hydrogen peroxide) in the electrochemical degradation of pollutants and inactivation of bacteria, and analyzes the impact of current density on removal efficiency. Through these research objectives, the paper aims to provide an innovative and low-cost solution to address antibiotic pollution and the spread of resistant bacteria, particularly in the field of drinking water treatment.

Electrochemical removal of antibiotics and multidrug-resistant bacteria using S-functionalized graphene sponge electrodes

Mechanism of Highly Efficient Electrochemical Degradation of Antibiotic Sulfadiazine Using a Layer-by-layer GNPs/PbO2 Electrode.

Energy-efficient electrochemical degradation of ciprofloxacin by a Ti-foam/PbO2-GN composite electrode: Electrode characteristics, parameter optimization, and reaction mechanism

Chlorine-free electrochemical disinfection using graphene sponge electrodes

Manganese oxide-functionalized graphene sponge electrodes for electrochemical chlorine-free disinfection of tap water

Metal-free carbon-based anode for electrochemical degradation of tetracycline and metronidazole in wastewater

Graphene-based sponges for electrochemical degradation of persistent organic contaminants

Antimicrobial Hierarchically Porous Graphene Oxide Sponges for Water Treatment

Efficient electrochemical oxidation of antibiotic wastewater using a graphene-loaded PbO2 membrane anode: Mechanisms and applications

Graphene Modified Electro-Fenton Catalytic Membrane for in Situ Degradation of Antibiotic Florfenicol.

Electro-responsive Supramolecular Graphene Oxide Hydrogels for Active Bacteria Adsorption and Removal

Enhanced Electrochemical Removal of Sulfadiazine Using Stainless Steel Electrode Coated with Activated Algal Biochar.

Selective Electrochemical H2O2 Generation on the Graphene Aerogel for Efficient Electro-Fenton Degradation of Ciprofloxacin

Highly adsorptive removal of heavy metal, dye, and antibiotic pollutants using functionalized graphene nanosheets sono-electrochemically derived from graphitic waste

Effects of Peroxide Types on the Removal Performance and Mechanism of Sulfonamide Antibiotics Using Graphene-Based Catalytic Membranes

Construction of 0-dimensional silver quantum dot/MoSe2@MXene/3-dimensional porous copper foam composite electrodes with heterogeneous interfaces for synergistic electrocatalytic degradation of antibiotics

Simultaneous degradation of trace antibiotics in water by adsorption and catalytic oxidation induced by N-doped reduced graphene oxide (N-rGO): synergistic mechanism

Electrochemical degradation of per- and polyfluoroalkyl substances (PFAS) using low-cost graphene sponge electrodes

Graphene-based Electrochemical Sensors for Antibiotics: Sensing Theories, Synthetic Methods, and On-Site Monitoring Applications.

Insights into the Synthesis and Application of Biochar Assisted Graphene-Based Materials in Antibiotic Remediation

Improved degradation of tetracycline antibiotic in electrochemical advanced oxidation processes (EAOPs): bioassay using bacteria and identification of intermediate compounds