Abstract:Most optical spectropolarimeters built to date operate as long-slit or point-source instruments; they are inefficient for observations of extended objects such as galaxies and nebulae. 2D spectropolarimetry technique development is a major challenge in astronomical instrumentation. At the South African Astronomical Observatory (SAAO) FiberLab, we are developing a spectropolarimetry capable Integral Field front-end called FiberPol(-6D) for the existing SpUpNIC spectrograph on the SAAO 1.9 m telescope. SpUpNIC is a general purpose 2 arc-minute long-slit spectrograph with a grating suite covering the wavelength range from 350 to 1000 nm and at spectral resolutions between 500 and 6000. FiberPol generates 6D observational data: x-y spatial dimensions, wavelength, and the three linear Stokes parameters $I$, $q$ and $u$. Using a rotating half-wave plate and a Wollaston prism, FiberPol executes two-channel polarimetry, and each channel is fed to an array of 14 fibers, corresponding to a field of view of $10\times20~arcseconds^2$ sampled with 2.9 arcsecond diameter fiber cores. These fiber arrays are then rerouted to form a pseudo-slit input to SpUpNIC. FiberPol aims to achieve a polarimetric accuracy of 0.1 % per spectral resolution bin. Further, it can also function as a non-polarimetric integral-field unit. The instrument design has been completed and it is currently being assembled and characterized in the lab. It is scheduled for on-sky commissioning in the second half of 2024. In this paper, we present the scientific and technical goals of FiberPol, its overall design and initial results from the lab assembly and testing. FiberPol is a low cost technology demonstrator, and the entire system predominantly employs small size, commercial off-the-shelve optics and optomechanical components. It can be modified and replicated for use on any existing spectrograph, especially on bigger telescopes.

Optical design options for Pollux: UV spectropolarimeter project for the Habitable Worlds Observatory

Design and modelling of spectrographs with holographic gratings on freeform surfaces

Spectropolarimeter on a 2--4 m class telescope and proposed science cases

Optical design of a multi-resolution, single shot spectrograph

Optical design of the SOXS spectrograph for ESO NTT

A proposal for imaging spectro-polarimetry with a new generation Multichannel Subtractive Double Pass (MSDP) onboard the EST telescope

Ultraviolet Technology To Prepare For The Habitable Worlds Observatory

Observing with HST below 1150Å: Extending the Cosmic Origins Spectrograph Coverage to 900Å

Building galaxies, stars, planets and the ingredients for life between the stars. A scientific proposal for a European Ultraviolet-Visible Observatory (EUVO)

On-sky demonstration at Palomar Observatory of the near-IR, high-resolution VIPA spectrometer

The Polstar UV Spectropolarimetry Mission

Improvements on Fresnel arrays for high contrast imaging

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

Design of pre-optics for laser guide star wavefront sensor for the ELT

Optical Design of a Dual-channel Imaging Spectrometer Sharing the Off-axis TMA System

Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities

Betelgeuse scope: Single-mode-fibers-assisted optical interferometer design for dedicated stellar activity monitoring

Adaptive optics for high resolution spectroscopy: A direct application with the future NIRPS spectrograph

Spectropolarimetry as a Means to Address Cloud Composition and Habitability for a Cloudy Exoplanetary Atmosphere in the Habitable Zone

[Study on an Optical System of Small Ultraviolet Imaging Spectrometer with High Resolution in Broadband].

Panopticon: a telescope for our times