Abstract:Cavity BPMs are crucial for achieving submicron beam alignment in X-ray Free-Electron Lasers (XFEL), particularly in undulator sections. These monitors typically generate RF signals in the S, C, or X band regions. Due to the limitations of analog-to-digital converter's (ADC) bandwidth and sampling rates, and digital signal processing capabilities, heterodyne and homodyne receivers are often employed to down-convert the RF signal to an intermediate frequency (IF) or baseband (Zero IF) respectively before digital sampling. The digitized signal is then processed by Field Programmable Gate Array (FPGA) to get the beam position and phase information. An RF direct-sampling beam signal processor has been developed using ADCs with a bandwidth of 9 GHz and a sampling rate of 2.6 GSPS, and a powerful system-on-chip FPGA. In addition, a prototype RF module without complex down conversion devices has been designed for the SHINE (Shanghai High Repetition Rate XFEL and Extreme Light Facility) cavity BPM. The processor and the RF module make a novel RF direct sampling and processing cavity BPM electronics for SHINE. This is the first attempt to use direct sampling electronics in the C band cavity BPM system. The analog signal processing chain is greatly simplified compared to the down-conversion structure. The performance of this electronics has been analyzed and evaluated in laboratory. The amplitude relative error is 2.0×10 -4 , surpassing the required accuracy of 1×10 -3 for cavity BPM systems. The phase error is 14 femtoseconds (fs), which also meets the requirements for an RF Beam Arrival Time Monitor (BAM) system. Additionally, the paper introduces the cavity BPM signal processing algorithms and their implementation in FPGA. The processor can deliver pulse-to-pulse beam position measurement above 1MHz. The RF direct-sampling electronics represents significant advancements in cavity BPM system, large-scale application can be carried out in accelerator facilities like SHINE.

Development of a novel bunch oscillation recorder with RFSoC technology

Research of bunch by bunch data acquisition system in SSRF

Development of fiber beam loss monitor based on Cerenkov principle

Digital Bunch-By-Bunch Transverse Feedback System at Ssrf

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Beam Instrumentation System Optimization for Top-up Operation in SSRF

A Bunch-by-bunch Beam Position Monitor Based on Scope Embedded IOC

Development and Implementation of Advanced Beam Diagnostic and Abort Systems in SuperKEKB

Development of the Bunch-By-Bunch Beam Current Acquisition System at Ssrf

Bunch-by-bunch Beam Transverse Feedback Electronics Designed for SSRF

Design and Testing of a Bunch-by-bunch Beam Position Transverse Feedback Processor

RFSoC-based front-end electronics for pulse detection

Real-time Beam Loss Monitoring System for the Injector of SSRF

Upgrade of Bunch Phase Monitor at SSRF Storage Ring

Development of a bolometry diagnostic for SPARC

Optimization of RF phase and beam loading distribution among RF stations in SuperKEKB

RF direct sampling and processing electronics for SHINE cavity BPM system

Development of a test platform for digital beam position monitor processor at SSRF

Design of the fully digital beam position monitor for beam position measurement in SSRF

Development of the Bunch-by-bunch Beam Position Acquisition System Based on BEEcube