Abstract:We carry out strain-controlled in situ compression experiments of micron-sized tungsten micropillars (W) in the temperature range 300-900K, together with simulations of three-dimensional discrete dislocation dynamics (DDD) on the same scale. Two distinct regimes are observed. At low temperatures, plastic deformation appears smooth, both temporally and spatially. Stress fluctuations are consistent with a Wiener stochastic process resulting from uncorrelated dislocation activity within the pillars. However, high-temperature stress fluctuations are highly correlated and exhibit features of self-organized criticality (SOC), with deformation located within well-defined slip bands. The high-temperature stress relaxation statistics are consistent with a thermally activated nucleation process from the surface. It is argued that the nature of the transition between the two regimes is the same as in the brittle to ductile transition in bulk BCC metals.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the plastic deformation mechanism of body - centered cubic (BCC) micro - pillar materials at different temperatures and their brittle - to - ductile transition (BDT). Specifically, through uniaxial compression experiments in the temperature range from 300K to 900K and combined with three - dimensional discrete dislocation dynamics (DDD) simulations, the researchers explored the differences in the plastic behavior of tungsten (W) micro - pillars at low and high temperatures. ### Research Background and Core of the Problem 1. **Microscopic Plastic Behavior**: Research in the past two decades has shown that the plastic deformation of crystalline materials at the micro - scale is manifested as intermittent dislocation activities. This has led to the hypothesis of whether plasticity follows the principle of self - organized criticality (SOC), that is, plastic deformation may exhibit self - organized critical behavior similar to natural phenomena such as earthquakes and solar flares under certain conditions. 2. **Effect of Temperature**: Existing research has shown that temperature has a significant impact on the mechanism of plastic deformation. Especially in BCC metals, changes in temperature can cause the plastic deformation mode to change from smooth flow to sudden stress drops, and this change is related to the brittle - to - ductile transition of the material. 3. **Experiment and Simulation**: In order to gain an in - depth understanding of this transition, the researchers carried out detailed experiments and simulations to reveal the specific mechanisms of plastic deformation at different temperatures. ### Research Methods - **Experimental Part**: Tungsten micro - pillars with a diameter of approximately 2.5 μm were prepared using a focused ion beam (FIB), and in - situ compression experiments were carried out at different temperatures. - **Simulation Part**: Three - dimensional discrete dislocation dynamics (DDD) simulations were used to study the plastic behavior of micro - pillars of the same size and crystal orientation at different temperatures. ### Key Findings 1. **Low - Temperature Behavior**: At low temperatures (< 500K), plastic deformation is smooth and has no obvious stress fluctuations, which is in line with the characteristics of the Wiener random process, that is, dislocation activities are uncorrelated. 2. **High - Temperature Behavior**: At high temperatures (> 600K), plastic deformation shows a high degree of correlation, and stress fluctuations exhibit the characteristics of self - organized criticality, such as "click" noise (1/f noise) and heavy - tailed distribution of dislocation avalanche sizes. 3. **Mechanism Explanation**: Plastic deformation at high temperatures is mainly controlled by the dislocation nucleation process in the surface stress - concentrated area. As the temperature rises, the mobility of dislocations increases, and at the same time, the nucleation rate also increases, resulting in a high degree of correlation of dislocation activities, forming local slip bands and large stress drops. ### Conclusion The research results show that there are significant differences in the plastic deformation mechanisms of BCC micro - pillar materials at different temperatures, and these differences are similar to the brittle - to - ductile transition of the materials. Plastic deformation at low temperatures is dominated by screw dislocations with low mobility, while plastic deformation at high temperatures is controlled by the dislocation nucleation process in the surface stress - concentrated area and exhibits the characteristics of self - organized criticality. This finding is helpful for understanding the plastic behavior of BCC metals under different conditions and is of great significance for material design and performance optimization.

Temperature-activated dislocation avalanches signaling brittle-to-ductile transition in BCC micropillars

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

Temperature Insensitivity of the Flow Stress in Body-Centered Cubic Micropillar Crystals

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

Coupled size and temperature effects on intermittent plasticity of BCC micro-crystals

Intrinsic Size Dependent Plasticity in BCC Micro-Pillars under Uniaxial Tension and Pure Torsion

Micropillar compression of single crystal tungsten carbide, part 2: Lattice rotation axis to identify deformation slip mechanisms

Deformation of micrometer and mm-sized Fe2.4wt.%Si single- and bi-crystals with a high angle grain boundary at room temperature

Discrete Shear Band Plasticity Through Dislocation Activities in Body-Centered Cubic Tungsten Nanowires

Surface-controlled dislocation multiplication in metal micropillars

Atomistic Processes of high-temperature plastic deformation of nanoscale body-centered cubic tungsten

Atomistic simulations on ductile-brittle transition in <111> BCC Fe nanowires

A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars

Anisotropic Size-Dependent Plasticity in Face-Centered Cubic Micropillars under Torsion

A Micropillar Compression Simulation by A Multiscale Plastic Model Based on 3-D Discrete Dislocation Dynamics

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Dynamic mechanisms of strengthening and softening of coherent twin boundary via dislocation pile-up and cross-slip

The role of slow screw dislocations in controlling fast strain avalanche dynamics in body-centered cubic metals

Microstructure evolution of compressed micropillars investigated by in situ HR-EBSD analysis and dislocation density simulations