Abstract:The problem of local damage diagnosis (based on the detection of impulsive and periodic signals) is discussed. Both features should be checked, as fault frequency must be linked to the true value calculated for a given machine and speed. The precise estimation of the fault frequency is hard due to several factors. If a speed fluctuation exists, it is solved by order analysis. A wider perspective is proposed here, namely, an automatic statistical approach to analyze the distribution of estimated fault frequencies. We propose a procedure to evaluate whether the fault frequency is constant or not. The algorithm uses frequency estimation based on peak detection in the envelope spectrum and statistical testing. We present simulation studies and industrial examples. We have found that if the fault frequency is not constant and its distribution does not follow Gaussian shape with minor variance, then one should use more advanced techniques, e.g. order analysis.

What problem does this paper attempt to address?

This paper attempts to solve the problem of identifying the change in fault frequency in local damage detection based on vibration signals under varying load/speed conditions. Specifically: 1. **Problem Background**: - Local damage detection (such as damage in bearings or gears) is an important issue in machine condition monitoring. - Diagnosing such damage depends on the detected impulse and periodic signals, and these signals must be related to the true fault frequency under the given machine and its operating conditions. 2. **Challenges**: - For complex machines, low rotational speeds, poor signal - to - noise ratio (SNR), and cases with load/speed fluctuations, accurately estimating the fault frequency is a nontrivial task. - Long signal segments can improve the frequency estimation accuracy, but it is difficult to find homogeneous signal segments under time - varying operating conditions. - In early damage diagnosis, the low SNR may affect the estimation error, resulting in different measurement results each time, so statistical analysis is required. - The fault frequency distribution may be distorted due to the above factors, leading to misleading conclusions. 3. **Research Objectives**: - Propose a simple method to evaluate whether the speed (fault frequency) is constant; if not, determine the possible sources of these changes (true input speed changes or the method used for fault frequency estimation). - Estimate the fault frequency using the peak detection technique in the envelope spectrum and verify whether the estimated fault frequency can be considered a constant value through statistical testing methods. - Help to decide whether there are frequency changes and the possible reasons for these changes, providing a basis for subsequent decision - making. 4. **Main Contributions**: - Demonstrate the practical importance of this problem through simulation studies and industrial examples. - Propose a flowchart (see Figure 7), which details how to identify the change in fault frequency through steps such as segmented signal processing, SNR calculation, simulated signal generation, and statistical testing. ### Formula Summary - **Hilbert Transform Formula**: \[ h(t)=H\{x(t)\}=\frac{1}{\pi}\int_{-\infty}^{\infty}\frac{x(\tau)}{t - \tau}d\tau \] - **Amplitude of Analytic Signal**: \[ x_{ht}(t)=\vert x(t)+j\cdot h(t)\vert=\sqrt{x^{2}(t)+h^{2}(t)} \] - **Mean Squared Error (MSE)**: \[ \text{MSE}=\frac{1}{n}\sum_{i = 1}^{n}(f_{i}-\hat{f})^{2} \] - **Kernel Density Estimation (KDE)**: \[ \hat{p}_{n}(f)=\frac{1}{nh}\sum_{i = 1}^{n}K\left(\frac{f-\hat{f}_{i}}{h}\right) \] where \(K(\cdot)\) is the kernel function and \(h\) is the smoothing bandwidth. - **Chi - square Test Statistic**: \[ T=\frac{(n - 1)\hat{\sigma}^{2}}{\sigma^{2}} \] Through these methods, the paper aims to provide a reliable way to evaluate and identify the change in fault frequency, especially under the conditions of load and speed changes.

Identification of fault frequency variation in the envelope spectrum in the vibration-based local damage detection in possible changing load/speed conditions

Bearing Fault Diagnosis under Non-Stationary Conditions Based on a Speed Signal Resonance Component Demodulation Algorithm

Fault Detection in Non-Gaussian Vibration Systems Using Dynamic Statistical-Based Approaches

Bearing Fault Diagnosis under Time-Varying Speed and Load Conditions Via Speed Sensorless Algorithm and Angular Resample

Fault Feature Extraction and Enhancement of Rolling Element Bearing in Varying Speed Condition

A non-linear time–frequency tool for machinery fault diagnosis under varying speed condition

Assessment of background noise properties in time and time-frequency domains in the context of vibration-based local damage detection in real environment

A Periodic-Modulation-oriented Noise Resistant Correlation Method for Industrial Fault Diagnostics of Rotating Machinery under the Circumstances of Limited System Signal Availability

Time-Varying Demodulation Analysis for Rolling Bearing Fault Diagnosis under Variable Speed Conditions

Faults’ Diagnosis of Time-Varying Rotational Speed Machinery Based on Vibration and Acoustic Signals Features Extraction, and Machine Learning Methods

Sparsity-based Algorithm for Detecting Faults in Rotating Machines

Comprehensive Diagnosis of Localized Rolling Bearing Faults during Rotating Machine Start-Up via Vibration Envelope Analysis

A Fault Frequency Bands Location Method Based on Improved Fast Spectral Correlation to Extract Fault Features in Axial Piston Pump Bearings

Localized Bearing Fault Analysis for Different Induction Machine Start-Up Modes via Vibration Time–Frequency Envelope Spectrum

Fault Signature Extraction of Rolling Bearings under Variable Speed Via Time–frequency Overlap Group Sparse Representation

Generalised envelope spectrum-based signal-to-noise objectives: Formulation, optimisation and application for gear fault detection under time-varying speed conditions

Unknown bearing fault diagnosis under time-varying speed conditions and strong noise background

An adaptive enhanced envelope spectrum technique for bearing fault detection in conditions characterized by strong noise

Analysis of instantaneous frequency for structure condition tracking using time-frequency representation: comparative study

Gear fault detection based on instantaneous frequency estimation using variational mode decomposition and permutation entropy under real speed scenarios

Time-wavelet energy spectral analysis for fault diagnosis of rolling element bearings