Abstract:The Compton Spectrometer and Imager (COSI) is an upcoming NASA Small Explorer satellite mission scheduled for launch in 2027 and designed to conduct an all-sky survey in the energy range of 0.2-5 MeV. Its instrument consists of an array of germanium detectors surrounded on four sides and underneath by active shields that work as anticoincidence system (ACS) to reduce the contribution of background events in the detectors. These shields are composed of bismuth germanium oxide (BGO), a scintillator material, coupled with Silicon photomultipliers, aimed to collect optical photons produced from interaction of ionizing particles in the BGO and convert them into an electric signal. The reference simulation framework for COSI is MEGAlib, a set of software tools based on the Geant4 toolkit. The interaction point of the incoming radiation, the design of the ACS modules and the BGO surface treatment change the light collection and the overall shielding accuracy. The use of the Geant4 optical physics library, with the simulation of the scintillation process, is mandatory for a more realistic evaluation of the ACS performances. However, including the optical processes in MEGAlib would dramatically increase the computing time of the COSI simulations. We propose the use of a response function encoding the energy resolution and 3D light yield correction based on a separate Geant4 simulation of the ACS that includes the full optical interaction. We present the verification of the Geant4 optical physics library against analytical computations and available laboratory measurements obtained using PMTs as readout device, as a preparatory phase for the simulation of the COSI ACS response.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to develop a response function for the anticoincidence system (ACS) of COSI (Compton Spectrometer and Imager) to improve its simulation accuracy while reducing the computation time. Specifically, the researchers hope to create a response function that includes energy resolution and 3D light - yield correction through Geant4 simulation, in order to more accurately evaluate the performance of ACS. ### Problem Background COSI is a small - detector mission to be launched by NASA, scheduled for launch in 2027, aiming to conduct an all - sky survey covering the energy range of 0.2 - 5 MeV. The main scientific goals of COSI include studying antimatter annihilation in the Milky Way, mapping radioactive elements produced by nucleosynthesis, determining radiation mechanisms and source geometries using polarization measurements, and detecting multi - messenger sources, etc. The COSI instrument consists of a germanium detector array, surrounded on four sides and at the bottom by an active shielding system (ACS). These shielding layers are composed of thallium - doped cesium iodide (CsI(Tl)) or bismuth germanate (BGO) crystals and are coupled to photomultiplier tubes (PMT) or silicon photomultiplier tubes (SiPM) for collecting and converting optical photons generated by the interaction of ionizing particles in BGO. ### Key Challenges 1. **Complexity of Optical Processes**: The propagation of optical photons in BGO involves complex physical processes such as absorption, reflection, and refraction, which have an important impact on the final signal readout. 2. **Computational Resource Limitations**: Incorporating all optical processes into MEGAlib simulation will significantly increase the computation time, making the simulation impractical. 3. **Accuracy of the Response Function**: A response function that can accurately describe the light - yield and energy resolution is required to ensure that the simulation results are consistent with the experimental data. ### Solutions The researchers propose to use the Geant4 simulation tool to generate a response function that can encode energy resolution and 3D light - yield correction. The specific steps are as follows: 1. **Independently Simulate the ACS Module**: Simulate the optical processes in the ACS module through Geant4, including the generation, transmission, and detection of photons. 2. **Construct the Response Function**: Construct a response function based on the simulation results, which can be used in MEGAlib to improve simulation efficiency and accuracy. 3. **Verify the Simulation Results**: Verify the accuracy of the Geant4 optical physics library by comparing it with laboratory measurements and theoretical models. ### Verification Methods 1. **Analytical Model Verification**: Use Snell and Fresnel equations to establish an analytical model to simulate the transmission, reflection, and absorption probabilities of photons at the interfaces of different materials and compare them with the Geant4 simulation results. 2. **Laboratory Measurement Verification**: Use laboratory measurement data (such as the light response of the CsI(Tl) block - PMT coupling system) to verify the Geant4 simulation results. ### Preliminary Results The preliminary results show that the Geant4 simulation results are basically consistent with the analytical model and laboratory measurement data, but there are slight deviations in some cases. These deviations may be due to interference effects and frustrated - transmission phenomena in very thin - layer materials, and these issues will be further explored and improved in future research. ### Summary This study aims to develop an efficient response function for the ACS of COSI through Geant4 simulation to improve simulation accuracy and reduce computation time. Through the verification of analytical models and laboratory measurements, the researchers have demonstrated the potential of Geant4 in simulating optical processes and provided a basis for further optimizing the performance of COSI.

Towards a response function for the COSI anticoincidence system: preliminary results from Geant4 simulations

Benchmarking COSI's detector effects engine

The cosipy library: COSI's high-level analysis software

The evaluation of the CUSP scientific performance by a GEANT4 Monte Carlo simulation

Simulation-based design study for the passive shielding of the COSINUS dark matter experiment

Across the soft gamma-ray regime: utilizing simultaneous detections in the Compton Spectrometer and Imager (COSI) and the Background and Transient Observer (BTO) to understand astrophysical transients

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Particle detection performance and Geant4 simulation with low-cost CMOS technology

Probing the Galactic Diffuse Continuum Emission with COSI

GEANT4 simulation study of the response of a miniature radiation detector in Galactic Cosmic Rays and inside a spacecraft

Detection response of the active components of the SciBar Cosmic Ray Telescope at Sierra Negra

Accessing new physics with an undoped, cryogenic CsI CEvNS detector for COHERENT at the SNS

Organic scintillators response function modeling for Monte Carlo simulation of Time-of-Flight measurements

Material Properties of Popular Radiation Detection Scintillator Crystals for Optical Physics Transport Modelling in Geant4

neuSIM4: A comprehensive GEANT4 based neutron simulation code

GPU-based optical photon simulation for the LHCb RICH 1 Detector

Simulation and Reconstruction Study of a Future Surface Scintillator Array at the IceCube Neutrino Observatory

Benchmarking Geant4 for Simulating Galactic Cosmic Ray Interactions Within Planetary Bodies

The HERMES-TP/SP background and response simulations

Particle discrimination in a NaI crystal using the COSINUS remote TES design