Control Pneumatic Soft Bending Actuator with Feedforward Hysteresis Compensation by Pneumatic Physical Reservoir Computing

Junyi Shen,Tetsuro Miyazaki,Kenji Kawashima
2024-09-11
Abstract:The nonlinearities of soft robots bring control challenges like hysteresis but also provide them with computational capacities. This paper introduces a fuzzy pneumatic physical reservoir computing (FPRC) model for feedforward hysteresis compensation in motion tracking control of soft actuators. Our method utilizes a pneumatic bending actuator as a physical reservoir with nonlinear computing capacities to control another pneumatic bending actuator. The FPRC model employs a Takagi-Sugeno (T-S) fuzzy model to process outputs from the physical reservoir. In comparative evaluations, the FPRC model shows equivalent training performance to an Echo State Network (ESN) model, whereas it exhibits better test accuracies with significantly reduced execution time. Experiments validate the proposed FPRC model's effectiveness in controlling the bending motion of the pneumatic soft actuator with open and closed-loop control systems. The proposed FPRC model's robustness against environmental disturbances has also been experimentally verified. To the authors' knowledge, this is the first implementation of a physical system in the feedforward hysteresis compensation model for controlling soft actuators. This study is expected to advance physical reservoir computing in nonlinear control applications and extend the feedforward hysteresis compensation methods for controlling soft actuators.
Robotics,Systems and Control
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the nonlinear control challenges in soft robots, especially the hysteresis phenomenon caused by the viscoelasticity of materials and the Coulomb friction between mechanical components. This hysteresis phenomenon leads to nonlinear cycles and dead zones between the actuator's input and output, making it difficult to precisely control its movement. For this reason, the paper proposes an approach based on the Fuzzy Pneumatic Physical Reservoir Computing (FPRC) model for feed - forward hysteresis compensation to achieve precise control of soft - bending actuators. Specifically, the main contributions of the paper are as follows: 1. **Proposing a new feed - forward hysteresis compensation method**: Using a double - chamber pneumatic artificial muscle (PAM) as a physical reservoir and combining the Takagi - Sugeno (T - S) fuzzy model to process the output of the reservoir to generate the output of the feed - forward hysteresis compensation model. 2. **Verifying the effectiveness of the FPRC model**: Through experiments, the tracking control effect of the FPRC model on the bending movement of soft actuators in open - loop and closed - loop control systems is verified, and its robustness to environmental disturbances is demonstrated. 3. **Comparison with existing methods**: Compared with the traditional Echo State Network (ESN) model, the FPRC model shows better performance in the testing phase and significantly reduces the execution time. The paper elaborates on this problem and its solution in the following parts: - **Introduction**: Introduces the development background of soft robots and the application of pneumatic drive in soft robots. Points out the control challenges of pneumatic soft actuators, especially the influence of the hysteresis phenomenon. - **Design of pneumatic bending actuators and hysteresis characteristics**: Describes the structural design of pneumatic bending actuators and obtains their hysteresis characteristics through experiments. - **Feed - forward hysteresis compensation model**: Constructs two different feed - forward hysteresis compensation models, one based on the traditional ESN model and the other is the FPRC model proposed in this paper. - **Experimental results**: Displays the experimental setup and experimental results, verifying the effectiveness and robustness of the FPRC model. - **Model performance analysis**: Analyzes the influence of different parameter settings on the performance of the FPRC model by the control variable method. In conclusion, this paper aims to overcome the hysteresis control problem in soft robots by introducing the FPRC model, thereby improving the precise control ability of soft actuators.