Abstract:Structural damping is known to be approximately rate-independent in many cases. Popular models for rate-independent dissipation are hysteresis models; and a highly popular hysteresis model is the Bouc-Wen model. If such hysteretic dissipation is incorporated in a refined finite element model, then the mathematical model includes the usual structural dynamics equations along with nonlinear nonsmooth ordinary differential equations for a large number of internal hysteretic states at Gauss points, to be used within the virtual work calculation for dissipation. For such systems, numerical integration becomes difficult due to both the distributed non-analytic nonlinearity of hysteresis as well as the very high natural frequencies in the finite element model. Here we offer two contributions. First, we present a simple semi-implicit integration approach where the structural part is handled implicitly based on the work of Piché, and where the hysteretic part is handled explicitly. A cantilever beam example is solved in detail using high mesh refinement. Convergence is good for lower damping and a smoother hysteresis loop. For a less smooth hysteresis loop and/or higher damping, convergence is observed to be roughly linear on average. Encouragingly, the time step needed for stability is much larger than the time period of the highest natural frequency of the structural model. Subsequently, data from several simulations conducted using the above semi-implicit method are used to construct reduced order models of the system, where the structural dynamics is projected onto a small number of modes and the number of hysteretic states is reduced significantly as well. Convergence studies of error against the number of retained hysteretic states show very good results.

Data-Driven Reduction of the Finite-Element Model of a Tribomechadynamics Benchmark Problem

Model reduction applied to square to rectangular martensitic transformations using proper orthogonal decomposition

Simulation of nonlinear thermomechanical waves with an empirical low dimensional model

Data-Assisted Non-Intrusive Model Reduction for Forced Nonlinear Finite Elements Models

Data-free Non-intrusive Model Reduction for Nonlinear Finite Element Models via Spectral Submanifolds

A Reduced Order Model for Joint Assemblies by Hyper-Reduction and Model-Driven Sampling

Model Reduction of Contact Dynamics Simulation Using a Modified Lyapunov Balancing Method

Low-dimensional Data-based Surrogate Model of a Continuum-mechanical Musculoskeletal System Based on Non-intrusive Model Order Reduction

A nonintrusive distributed reduced‐order modeling framework for nonlinear structural mechanics—Application to elastoviscoplastic computations

A Novel Method for Constructing a Dynamics Model with the Flexible Characteristics

Linearization And Model Reduction Of Contact Dynamics Simulation

Application of 2D finite element model for nonlinear dynamic analysis of clamp band joint

Semi-implicit Integration and Data-Driven Model Order Reduction in Structural Dynamics with Hysteresis

Accelerating Construction of Non-Intrusive Nonlinear Structural Dynamics Reduced Order Models through Hyperreduction

Model Order Reduction of Thermo-Mechanical Coupling Flexible Multibody Dynamics Via Free-Interface Component Mode Synthesis Method

Exact Model Reduction for Damped-Forced Nonlinear Beams: An Infinite-Dimensional Analysis

MODEL REDUTION OF RIGID-FLEXIBLE COUPLING DYNAMICS OF HUB-BEAM SYSTEM

Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tool

Finite element based model order reduction for parametrized one-way coupled steady state linear thermomechanical problems

Comparison of Reduction Methods for Finite Element Geometrically Nonlinear Beam Structures

Embedded symmetric positive semi-definite machine-learned elements for reduced-order modeling in finite-element simulations with application to threaded fasteners