Active-IRS-Enabled Target Detection

Xianxin Song,Xiaoqi Qin,Xianghao Yu,Jie Xu,Derrick Wing Kwan Ng

2024-09-17

Abstract:This letter studies an active intelligent reflecting surface (IRS)-enabled non-line-of-sight (NLoS) target detection system, in which an active IRS equipped with active reflecting elements and sensors is strategically deployed to facilitate target detection in the NLoS region of the base station (BS) by processing echo signals through the BS-IRS-target-IRS link. First, we design an optimal detector based on the Neyman-Pearson (NP) theorem and derive the corresponding detection probability. Intriguingly, it is demonstrated that the optimal detector can exploit both the BS's transmit signal and the active IRS's reflection noise for more effective detection. Subsequently, we jointly optimize the transmit beamforming at the BS and the reflective beamforming at the active IRS to maximize the detection probability, subject to the maximum transmit power constraint at the BS, as well as the maximum amplification power and gain constraints at the active IRS. Finally, simulation results unveil that the proposed joint beamforming design significantly enhances the detection probability, with the active IRS outperforming its fully- and semi-passive counterparts in detection performance.

Signal Processing

What problem does this paper attempt to address?

This paper aims to address the challenges in non - line - of - sight (NLoS) target detection, especially by introducing an Active Intelligent Reflecting Surface (Active - IRS) with active reflecting units and sensors to enhance the performance of the target detection system. Specifically, the paper mainly solves the following problems:

1. **Improve the target detection probability in the NLoS area**:
- Traditional methods are difficult to effectively detect targets in the NLoS environment because of large signal path loss and complex multipath effects.
- The paper proposes an optimal detector design based on the Neyman - Pearson (NP) theorem. This detector can simultaneously utilize the transmitting signal of the base station (BS) and the reflected noise of the Active - IRS, thus detecting targets more effectively.

2. **Optimize the transmission beamforming and the reflection beamforming**:
- In practical applications, in order to maximize the detection probability, it is necessary to jointly optimize the transmission beamforming of the BS and the reflection beamforming of the Active - IRS.
- The paper considers the maximum transmit power constraint of the BS and the maximum amplification power and gain constraints of the Active - IRS, and proposes a joint optimization framework, enabling the system to achieve the best detection performance under these constraint conditions.

3. **Explore the role of Active - IRS reflection noise**:
- Previous studies usually regarded the reflection noise of the IRS as harmful interference and ignored its potential positive effects.
- This paper for the first time proves that the reflection noise of the Active - IRS can be utilized to improve the detection performance and shows how to design a detector to fully utilize this characteristic.

4. **Verify the effectiveness of the proposed scheme**:
- The simulation results show that, compared with the Fully - Passive and Semi - Passive IRS, the target detection system using Active - IRS has a higher detection probability.
- In addition, the simulation also shows the significant advantages of the joint beamforming design in enhancing the detection performance.

In summary, the core problem of this paper is to overcome the problems of target detection in the NLoS environment by introducing and optimizing the Active - IRS technology, thereby significantly improving the probability and performance of target detection.