Upper-Limb Rehabilitation with a Dual-Mode Individualized Exoskeleton Robot: A Generative-Model-Based Solution

Yu Chen,Shu Miao,Jing Ye,Gong Chen,Jianghua Cheng,Ketao Du,Xiang Li
2024-09-05
Abstract:Several upper-limb exoskeleton robots have been developed for stroke rehabilitation, but their rather low level of individualized assistance typically limits their effectiveness and practicability. Individualized assistance involves an upper-limb exoskeleton robot continuously assessing feedback from a stroke patient and then meticulously adjusting interaction forces to suit specific conditions and online changes. This paper describes the development of a new upper-limb exoskeleton robot with a novel online generative capability that allows it to provide individualized assistance to support the rehabilitation training of stroke patients. Specifically, the upper-limb exoskeleton robot exploits generative models to customize the fine and fit trajectory for the patient, as medical conditions, responses, and comfort feedback during training generally differ between patients. This generative capability is integrated into the two working modes of the upper-limb exoskeleton robot: an active mirroring mode for patients who retain motor abilities on one side of the body and a passive following mode for patients who lack motor ability on both sides of the body. The performance of the upper-limb exoskeleton robot was illustrated in experiments involving healthy subjects and stroke patients.
Robotics
What problem does this paper attempt to address?
The problem this paper attempts to address is the insufficient individualized assistance capabilities of existing upper limb exoskeleton robots in stroke rehabilitation training. Specifically, while current upper limb exoskeleton robots can provide a certain degree of rehabilitation training, their level of individualized assistance is low, which often limits their effectiveness and practicality. Individualized assistance requires the exoskeleton robot to continuously assess patient feedback and finely adjust the interaction force according to specific conditions and real-time changes. To solve this problem, the paper proposes a new upper limb exoskeleton robot with online generation capabilities that can provide highly personalized assistance to stroke patients. The main features of this new robot include: 1. **Personalized Assistance**: Utilizing generative models to customize the patient's movement trajectory, as different patients' medical conditions, responses, and comfort feedback vary during training. 2. **Dual-Mode Operation**: The robot has two working modes: - **Active Mirror Mode**: Suitable for patients who retain movement ability in one limb, driving the affected side's movement by predicting the healthy side's movement intention. - **Passive Follow Mode**: Suitable for patients who have lost movement ability in both limbs, guiding the patient's movement through pre-programmed trajectories. 3. **High Degree of Freedom**: The robot has 6 degrees of freedom (5 active degrees of freedom and 1 passive degree of freedom), assisting the shoulder and elbow joints, covering the full range of upper limb movements. 4. **Compliant and Cable-Driven Mechanisms**: Most active joints are driven by Series Elastic Actuators (SEAs) and cable mechanisms, which absorb energy and have low inertia, providing great flexibility and ensuring hardware safety. 5. **Safety**: Ensured through both hardware and software. On the hardware side, SEAs are impact-resistant and have high backdrivability; on the software side, online trajectory optimization is performed, and an anomaly detection network is built to detect and mitigate physical conflicts. Through these innovative designs, the paper aims to improve the effectiveness and safety of upper limb exoskeleton robots in stroke rehabilitation training, enabling patients to regain natural and original movement abilities.