Monotonicity of the modulus under curve shortening flow

Arjun Sobnack,Peter M. Topping

2024-09-05

Abstract:Given two disjoint nested embedded closed curves in the plane, both evolving under curve shortening flow, we show that the modulus of the enclosed annulus is monotonically increasing in time. An analogous result holds within any ambient surface satisfying a lower curvature bound.

Differential Geometry,Analysis of PDEs

What problem does this paper attempt to address?

Asymptotic Convergence for a Class of Fully Nonlinear Curvature Flows

Qi-Rui Li,Weimin Sheng,Xu-Jia Wang

DOI: https://doi.org/10.1007/s12220-019-00169-4

2019-01-01

Journal of Geometric Analysis

Abstract:In this paper, we study a class of contracting flows of closed, convex hypersurfaces in the Euclidean space $${\mathbb {R}}^{n+1}$$ with speed $$r^{\alpha } \sigma _k$$, where $$\sigma _k$$ is the k-th elementary symmetric polynomial of the principal curvatures, $$\alpha \in {\mathbb {R}}^1$$, and r is the distance from the hypersurface to the origin. If $$\alpha \ge k+1$$, we prove that the flow exists for all time, preserves the convexity and converges smoothly after normalisation to a sphere centred at the origin. If $$\alpha <k+1$$, a counterexample is given for the above convergence. In the case $$k=1$$ and $$\alpha \ge 2$$, we also prove that the flow converges to a round point if the initial hypersurface is weakly mean-convex and star-shaped.
On Asymptotic Behavior for Singularities of the Powers of Mean Curvature Flow

Weimin Sheng,Chao Wu

DOI: https://doi.org/10.1007/s11401-007-0448-9

2009-01-01

Abstract:Let M n be a smooth, compact manifold without boundary, and F 0: M n → R n+1 a smooth immersion which is convex. The one-parameter families F(·, t): M n × [0, T) → R n+1 of hypersurfaces M t n = F(·, t)(M n ) satisfy an initial value problem dt/dF(·, t) = −H k (·, t)ν(·, t), F(·, 0) = F 0(·), where H is the mean curvature and ν(·, t) is the outer unit normal at F(·, t), such that −H ν = $\overrightarrow H $ is the mean curvature vector, and k > 0 is a constant. This problem is called H k -flow. Such flow will develop singularities after finite time. According to the blow-up rate of the square norm of the second fundamental forms, the authors analyze the structure of the rescaled limit by classifying the singularities as two types, i.e., Type I and Type II. It is proved that for Type I singularity, the limiting hypersurface satisfies an elliptic equation; for Type II singularity, the limiting hypersurface must be a translating soliton.
The Curve Shortening Flow for Curves of Finite Total (Absolute) Curvature

Patrick Guidotti

2023-11-30

Abstract:We revisit the well-known Curve Shortening Flow for immersed curves in the $d$-dimensional Euclidean space. We exploit a fundamental structure of the problem to derive a new global construction of a solution, that is, a construction that is valid for all times and is insensitive to singularities. The construction is characterized by discretization in time and the approximant, while still exhibiting the possibile formation of finitely many singularities at a finite set of singular times, exists globally and is well behaved and simpler to analyze than a solution of the CSF. A solution of the latter is obtained in the limit. Estimates for a natural (geometric) norm involving length and total absolute curvature allow passage to the limit. Many classical qualitative results about the flow can be recovered by exploiting the simplicity of the approximant and new ones can be proved. The construction also suggests a numerical procedure for the computation of the flow which proves very effective as demonstrated by a series of numerical experiments scattered throughout the paper.

Analysis of PDEs,Numerical Analysis
Sharp Entropy Bounds for Plane Curves and Dynamics of the Curve Shortening Flow

Julius Baldauf,Ao Sun

DOI: https://doi.org/10.48550/arXiv.1808.03936

2020-12-25

Abstract:We prove that a closed immersed plane curve with total curvature $2\pi m$ has entropy at least $m$ times the entropy of the embedded circle, as long as it generates a type I singularity under the curve shortening flow (CSF). We construct closed immersed plane curves of total curvature $2\pi m$ whose entropy is less than $m$ times the entropy of the embedded circle. As an application, we extend Colding-Minicozzi's notion of a generic mean curvature flow to closed immersed plane curves by constructing a piecewise CSF whose only singularities are embedded circles and type II singularities.

Differential Geometry
Delayed parabolic regularity for curve shortening flow

Arjun Sobnack,Peter M. Topping

2024-08-08

Abstract:Given two curves bounding a region of area $A$ that evolve under curve shortening flow, we propose the principle that the regularity of one should be controllable in terms of the regularity of the other, starting from time $A/\pi$. We prove several results of this form and demonstrate that no estimate can hold before that time. As an example application, we construct solutions to graphical curve shortening flow starting with initial data that is merely an $L^1$ function.

Analysis of PDEs,Differential Geometry
On the curve diffusion flow of closed plane curves

Glen Wheeler

DOI: https://doi.org/10.48550/arXiv.1201.3735

2012-01-18

Abstract:In this paper we consider the steepest descent $H^{-1}$-gradient flow of the length functional for immersed plane curves, known as the curve diffusion flow. It is known that under this flow there exist both initially immersed curves which develop at least one singularity in finite time and initially embedded curves which self-intersect in finite time. We prove that under the flow closed curves with initial data close to a round circle in the sense of normalised $L^2$ oscillation of curvature exist for all time and converge exponentially fast to a round circle. This implies that for a sufficiently large `waiting time' the evolving curves are strictly convex. We provide an optimal estimate for this waiting time, which gives a quantified feeling for the magnitude to which the maximum principle fails. We are also able to control the maximum of the multiplicity of the curve along the evolution. A corollary of this estimate is that initially embedded curves satisfying the hypotheses of the global existence theorem remain embedded. Finally, as an application we obtain a rigidity statement for closed planar curves with winding number one.

Analysis of PDEs,Differential Geometry
Curve shortening flows on surfaces that are not convex at infinity

Naotoshi Fujihara

2024-10-12

Abstract:The behavior of the curve shortening flow has been extensively studied. Gage, Hamilton, and Grayson proved that, under the curve shortening flow, an embedded closed curve in the Euclidean plane becomes convex after a finite time and then shrinks to a point while remaining convex. Moreover, Grayson extended these results to surfaces that are convex at infinity and proved results similar to those for plane curves. In this paper, we study the curve shortening flow on surfaces that are not convex at infinity. Specifically, we consider a warped product of a unit circle and an open interval with a strictly increasing warping function. In this setting, we can define a graph property for curves within these warped products. It is known that this graph property is preserved along the curve shortening flow. Similarly to the behavior of the curve shortening flow in the plane, we prove that the curve becomes a graph after a finite time under the curve shortening flow.

Differential Geometry
Singularities of low entropy high codimension curve shortening flow

Florian Litzinger

2023-04-05

Abstract:We consider curve shortening flow of arbitrary codimension in an Euclidean background. We show that, close to a singularity, the flow is asymptotically planar, paralleling Altschuler's work in the case of space curves, and analyse the blow-up limits of the flow. Using these results, we then prove that the curve shortening flow of initial curves with an entropy bound converges to a round point in finite time.

Differential Geometry,Analysis of PDEs
Discrete anisotropic curve shortening flow in higher codimension

Klaus Deckelnick,Robert Nürnberg

DOI: https://doi.org/10.1093/imanum/drae015

2024-05-23

IMA Journal of Numerical Analysis

Abstract:Abstract We introduce a novel formulation for the evolution of parametric curves by anisotropic curve shortening flow in ${{\mathbb{R}}}^{d}$, $d\geq 2$. The reformulation hinges on a suitable manipulation of the parameterization’s tangential velocity, leading to a strictly parabolic differential equation. Moreover, the derived equation is in divergence form, giving rise to a natural variational numerical method. For a fully discrete finite element approximation based on piecewise linear elements we prove optimal error estimates. Numerical simulations confirm the theoretical results and demonstrate the practicality of the method.

mathematics, applied
Curve shortening flow on Riemann surfaces with conical singularities

Nikolaos Roidos,Andreas Savas-Halilaj

DOI: https://doi.org/10.1007/s00208-024-02813-z

2024-02-14

Mathematische Annalen

Abstract:We study the curve shortening flow on Riemann surfaces with finitely many conformal conical singularities. If the initial curve is passing through the singular points, then the evolution is governed by a degenerate quasilinear parabolic equation. In this case, we establish short time existence, uniqueness, and regularity of the flow. We also show that the evolving curves stay fixed at the singular points of the surface and obtain some contracting and convergence results.

mathematics
On bounds of entropy and total curvature for ancient curve shortening flows

Wei-Bo Su,Kai-Wei Zhao

2024-10-03

Abstract:Bounds of total curvature and entropy are two common conditions placed on mean curvature flows. We show that these two hypotheses are equivalent for the class of ancient complete embedded smooth planar curve shortening flows, which are one-dimensional mean curvature flows. As an application, we give a short proof of the uniqueness of tangent flow at infinity of an ancient smooth complete non-compact curve shortening flow with finite entropy embedded in $\mathbb{R}^2$.

Differential Geometry
Curvature-Torsion Entropy for Twisted Curves under Curve Shortening Flow

Gabriel Khan

DOI: https://doi.org/10.1017/S0004972723000643

2023-05-12

Abstract:We study curve-shortening flow for twisted curves in $\mathbb{R}^3$ (i.e., curves with nowhere vanishing curvature $\kappa$ and torsion $\tau$) and define a notion of torsion-curvature entropy. Using this functional, we show that either the curve develops an inflection point or the eventual singularity is highly irregular (and likely impossible). In particular, it must be a Type II singularity which admits sequences along which $\frac{\tau}{\kappa^2} \to \infty$. This contrasts strongly with Altschuler's planarity theorem [J. Differential Geom. (1991)], which shows that along any essential blow-up sequence, $\frac{\tau}{\kappa} \to 0$.

Differential Geometry,Analysis of PDEs
On a gradient flow of plane curves minimizing the anisoperimetric ratio

Daniel Sevcovic,Shigetoshi Yazaki

DOI: https://doi.org/10.48550/arXiv.1203.2238

2013-06-05

Abstract:We analyze a gradient flow of closed planar curves minimizing the anisoperimetric ratio. For such a flow the normal velocity is a function of the anisotropic curvature and it also depends on the total interfacial energy and enclosed area of the curve. In contrast to the gradient flow for the isoperimetric ratio, we show there exist initial curves for which the enclosed area is decreasing with respect to time. We also derive a mixed anisoperimetric inequality for the product of total interfacial energies corresponding to different anisotropy functions. Finally, we present several computational examples illustrating theoretical results.

Differential Geometry,Numerical Analysis
Curve shortening-straightening flow for non-closed planar curves with infinite length

Matteo Novaga,Shinya Okabe

DOI: https://doi.org/10.48550/arXiv.1306.1398

2013-06-06

Abstract:We consider a motion of non-closed planar curves with infinite length. The motion is governed by a steepest descent flow for the geometric functional which consists of the sum of the length functional and the total squared curvature. We call the flow shortening-straightening flow. In this paper, first we prove a long time existence result for the shortening-straightening flow for non-closed planar curves with infinite length. Then we show that the solution converges to a stationary solution as time goes to infinity. Moreover we give a classification of the stationary solution.

Analysis of PDEs
Length-constrained, length-penalised and free elastic flows of planar curves inside cones

Mashniah A. Gazwani,James A. McCoy

2024-11-22

Abstract:We study families of smooth, embedded, regular planar curves $ \alpha : \left [-1,1 \right ]\times \left [0,T \right )\to \mathbb{R}^{2}$ with generalised Neumann boundary conditions inside cones, satisfying three variants of the fourth-order nonlinear $L^2$- gradient flow for the elastic energy: (1) elastic flow with a length penalisation, (2) elastic flow with fixed length and (3) the unconstrained or `free' elastic flow. Assuming neither end of the evolving curve reaches the cone tip, existence of smooth solutions for all time given quite general initial data is well known, but classification of limiting shapes is generally not known. For cone angles not too large and with suitable smallness conditions on the $L^2$-norm of the first arc length derivative of curvature of the initial curve, we prove in cases (1) and (2) smooth exponential convergence of solutions in the $C^\infty$-topology to particular circular arcs, while in case (3), we show smooth convergence to an expanding self-similar arc.

Analysis of PDEs
On the long-time limit of the mean curvature flow in closed manifolds

Alexander Mramor,Ao Sun

2024-12-05

Abstract:In this article we show that generally almost regular flows, introduced by Bamler and Kleiner, in closed 3-manifolds will either go extinct in finite time or flow to a collection of smooth embedded minimal surfaces, possibly with multiplicity. Using a perturbative argument then we construct piecewise almost regular flows which either go extinct in finite time or flow to a stable minimal surface, possibly with multiplicity. We apply these results to construct minimal surfaces in 3-manifolds in a variety of circumstances, mainly novel from the point of the view that the arguments are via parabolic methods.

Differential Geometry,Analysis of PDEs,Geometric Topology
Stability analysis for the anisotropic curve shortening flow of planar networks

Michael Gößwein,Matteo Novaga,Paola Pozzi

2023-10-09

Abstract:In this article we study the anisotropic curve shortening flow for a planar network of three curves with fixed endpoints and which meet in a triple junction. We show that the anisotropic curvature energy fulfills a Lojasiewicz-Simon gradient inequality and use this knowledge to derive stability results for the flow. Precisely, in our main theorem we show that for any initial data, which are $C^{2,\alpha}$-close to a (local) energy minimizer, the flow exists globally and converges to a possibly different energy minimum.

Analysis of PDEs,Differential Geometry
A novel finite element approximation of anisotropic curve shortening flow

Klaus Deckelnick,Robert Nürnberg

DOI: https://doi.org/10.4171/IFB/500

2023-01-27

Abstract:We extend the DeTurck trick from the classical isotropic curve shortening flow to the anisotropic setting. Here the anisotropic energy density is allowed to depend on space, which allows an interpretation in the context of Finsler metrics, giving rise to e.g.\ geodesic curvature flow in Riemannian manifolds. Assuming that the density is strictly convex and smooth, we introduce a novel weak formulation for anisotropic curve shortening flow. We then derive an optimal $H^1$--error bound for a continuous-in-time semidiscrete finite element approximation that uses piecewise linear elements. In addition, we consider some fully practical fully discrete schemes and prove their unconditional stability. Finally, we present several numerical simulations, including some convergence experiments that confirm the derived error bound, as well as applications to crystalline curvature flow and geodesic curvature flow.

Numerical Analysis,Differential Geometry

Monotonicity of the modulus under curve shortening flow

Asymptotic Convergence for a Class of Fully Nonlinear Curvature Flows

On Asymptotic Behavior for Singularities of the Powers of Mean Curvature Flow

The Curve Shortening Flow for Curves of Finite Total (Absolute) Curvature

Sharp Entropy Bounds for Plane Curves and Dynamics of the Curve Shortening Flow

Delayed parabolic regularity for curve shortening flow

On the curve diffusion flow of closed plane curves

Curve shortening flows on surfaces that are not convex at infinity

Singularities of low entropy high codimension curve shortening flow

Discrete anisotropic curve shortening flow in higher codimension

Curve shortening flow on Riemann surfaces with conical singularities

On bounds of entropy and total curvature for ancient curve shortening flows

Curvature-Torsion Entropy for Twisted Curves under Curve Shortening Flow

On a gradient flow of plane curves minimizing the anisoperimetric ratio

Curve shortening-straightening flow for non-closed planar curves with infinite length

Length-constrained, length-penalised and free elastic flows of planar curves inside cones

On the long-time limit of the mean curvature flow in closed manifolds

Stability analysis for the anisotropic curve shortening flow of planar networks

A novel finite element approximation of anisotropic curve shortening flow