Abstract:Some h-p finite element computations have been carried out to obtain solutions for fully developed laminar flows in curved pipes with curvature ratios from 0.001 to 0.5. An Oldroyd-3-constant model is used to represent the viscoelastic fluid, which includes the upper-convected Maxwell (UCM) model and the Oldroyd-B model as special cases. With this model we can examine separately the effects of the fluid inertia, and the first and second normal-stress differences. From analysis of the global torque and force balances, three criteria are proposed for this problem to estimate the errors in the computations. Moreover, the finite element solutions are accurately confirmed by the perturbation solutions of Robertson & Muller (1996) in the cases of small Reynolds/Deborah numbers.Our numerical solutions and an order-of-magnitude analysis of the governing equations elucidate the mechanism of the secondary flow in the absence of second normal-stress difference. For Newtonian flow, the pressure gradient near the wall region is the driving force for the secondary flow; for creeping viscoelastic flow, the combination of large axial normal stress with streamline curvature, the so-called hoop stress near the wall, promotes a secondary flow in the same direction as the inertial secondary flow, despite the adverse pressure gradient there; in the case of inertial viscoelastic flow, both the larger axial normal stress and the smaller inertia near the wall promote the secondary flow.For both Newtonian and viscoelastic fluids the secondary volumetric fluxes per unit of work consumption and per unit of axial volumetric flux first increase then decrease as the Reynolds/Deborah number increases; this behaviour should be of interest in engineering applications.Typical negative values of second normal-stress difference can drastically suppress the secondary flow and in the case of small curvature ratios, make the flow approximate the corresponding Poiseuille flow in a straight pipe. The viscoelasticity of Oldroyd-B fluid causes drag enhancement compared to Newtonian flow. Adding a typical negative second normal-stress difference produces large drag reductions for a small curvature ratio δ = 0.01; however, for a large curvature ratio δ = 0.2, although the secondary flows are also drastically attenuated by the second normal-stress difference, the flow resistance remains considerably higher than in Newtonian flow.It was observed that for the UCM and Oldroyd-B models, the limiting Deborah numbers met in our steady solution calculations obey the same scaling criterion as proposed by McKinley et al. (1996) for elastic instabilities; we present an intriguing problem on the relation between the Newton iteration for steady solutions and the linear stability analyses.

Direct numerical simulation of two boundary layers with the same pressure distribution but different surface curvatures

A systematic DNS approach to isolate wall-curvature effects in spatially developing boundary layers

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Adverse-pressure-gradient turbulent boundary layer on convex wall

Simulation of Couette Flow Using Conventional Burnett Equations with Modified Slip Boundary Conditions

Turbulent boundary layer with strong favorable pressure gradient and curvature effects: Streamline coordinate and scaling analysis

Direct Numerical Simulation Database of High-Speed Flow over Parameterized Curved Walls

Numerical Simulation of Laminar Flow in Various Curved Pipes Using a Boundary-Fitted Coordinate System.

Numerical simulation for various curved pipes using a boundary-fitted coordinate system.

Direct Numerical Simulation and Theory of a Wall-Bounded Flow with Zero Skin Friction

Direct Numerical Simulation of Turbulent Boundary Layer with Heat Transfer

Curvature effects on the structure of near-wall turbulence

Direct Numerical Simulation of Condensing Stratified Flow

Bypass Transition in Boundary Layers Subject to Strong Pressure Gradient and Curvature Effects

Direct Numerical Simulation of the Transitional Boundary-Layer Flow Induced by an Isolated Hemispherical Roughness Element

Numerical simulation of binary fluid–surfactant phase field model coupled with geometric curvature on the curved surface

Separation of a Laminar Boundary Layer Subjected to Pressure Gradients with Spanwise Variations

Direct Numerical Simulation of the Turbulent Flow in Curved Channel

Fully Developed Viscous and Viscoelastic Flows in Curved Pipes

A comparison of different approaches to compute surface tension contribution in incompressible two-phase flows

Scale law analysis of the curved boundary layer evolving around a horizontal cylinder at Pr > 1