Abstract:Optical frequency comb, as a spectrum made of discrete and equally spaced spectral lines, is a light source with essential applications in modern technology. Cavity optomechanical systems were found to be a feasible candidate for realizing on-chip frequency comb with low repetition rate. However, it was difficult to increase the comb line numbers of this type of frequency combs because the mechanical oscillation amplitude of such system, which determines the frequency comb bandwidth, cannot quickly increase with pump laser power. Here, we develop a new approach to generate broadband optomechanical frequency comb by employing a different mechanism to enhance the mechanical oscillation. Two pump tones with their frequency difference matching the mechanical frequency will drive the system into a self-organized nonlinear resonance and thus tremendously transfer the energy to the mechanical resonator. As a result, more than $10000$ or even more comb lines become available under the pump laser power in the order of milliwatt. A unique feature of the self-organized resonance is the mechanical frequency locking so that, within a certain range of the frequency difference between two drive tones, the distance between comb teeth can be locked by the two drive tones and becomes independent of any change of pump power. This property guarantees a stable repetition rate of the generated frequency comb.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to generate a broadband optomechanical frequency comb. Specifically, the researchers found that in traditional optomechanical systems when generating frequency combs, since the mechanical oscillation amplitude is difficult to increase rapidly with the pump laser power, the number of lines in the frequency comb is limited. To solve this problem, the paper proposes a new method. By using different mechanisms to enhance mechanical oscillation, a wider frequency comb bandwidth can be achieved. ### Main contributions of the paper 1. **New mechanism for enhancing mechanical oscillation**: - By using two pump tones whose frequency difference matches the natural mechanical frequency of the system, the system can be driven into a self - organized nonlinear resonance state. This resonance state can significantly transfer energy into the mechanical resonator, thereby greatly increasing the amplitude of mechanical oscillation. - The results show that under milliwatt - level pump laser power, more than 10,000 or even more frequency comb lines can be generated. 2. **Frequency - locking characteristics**: - A unique feature of self - organized resonance is mechanical frequency locking. This means that within a certain range of the frequency difference between the two driving tones, the distance between the frequency comb lines can be locked and does not depend on the change of pump power. This characteristic ensures that the generated frequency comb has a stable repetition rate. 3. **Optimization method**: - The paper also explores further optimizing the bandwidth of the frequency comb by adjusting the frequency offset of the driving tones. For example, by shifting the two driving tones to the blue side, the bandwidth of the frequency comb can be significantly expanded. ### Formula analysis - **Enhancement of mechanical oscillation**: \[ E_m=\frac{1}{2}X_m^2 + \frac{1}{2}P_m^2\approx\frac{1}{2}A_m^2 \] where $E_m$ is the mechanical energy, $X_m$ and $P_m$ are the dimensionless mechanical displacement and momentum respectively, and $A_m$ is the amplitude of mechanical oscillation. - **Frequency - locking condition**: \[ |\Delta_1-\Delta_2|=\omega_m+\delta \] where $\Delta_1$ and $\Delta_2$ are the detunings of the two pump tones, $\omega_m$ is the natural mechanical frequency of the system, and $\delta$ is a small deviation. When $\delta\rightarrow0$, the system will exhibit a resonance phenomenon. - **Sideband enhancement**: \[ A_1 = 2\left|\sum_{p}\alpha_{p + 1}\alpha_p^*\right| \] where $A_1$ is the amplitude of the first sideband, and $\alpha_p$ is the coefficient of the $p$ - th sideband. By blue - side detuning, the amplitude of the first sideband can be enhanced, thereby increasing the bandwidth of the frequency comb. ### Conclusion By introducing the dual - tone driving and self - organized nonlinear resonance mechanism, the paper successfully solves the problem of the limited number of lines when generating frequency combs in traditional optomechanical systems, and shows how to ensure the stability of the frequency comb through the frequency - locking characteristics. In addition, the paper also proposes a method to further optimize the bandwidth of the frequency comb by adjusting the frequency offset of the driving tones. These achievements provide important theoretical and technical support for the future development of high - performance optomechanical frequency combs.

Optical frequency combs significantly spanned to broad bandwidths by an optomechanical resonance

Optical frequency comb significantly spanned to broadband by an optomechanical resonance

Optical frequency comb generation from a monolithic microresonator

Optomechanical Frequency Comb Based on Multiple Nonlinear Dynamics

Mechanical overtone frequency combs

Generation of Optical Frequency Comb via Giant Optomechanical Oscillation

Optical frequency comb generation based on spectral broadening of a phase locked dual-wavelength microcavity laser

A Silicon-Based Monolithic Optical Frequency Comb Source

Magnonic frequency comb in the magnomechanical resonator

Optical Frequency Comb Generation from a 1.65 Μm Single-Section Quantum Well Laser.

High-efficiency and broadband electro-optic frequency combs enabled by coupled micro-resonators

Frequency Comb with High Tunability Via Coexistence State Excitation and Cavity Modulation in Microelectromechanical Resonators

Integrated frequency-modulated optical parametric oscillator

Multi-Octave Frequency Comb from an Ultra-Low-Threshold Nanophotonic Parametric Oscillator

Generation, Development, and Application of Microcombs

Broadband Optical Frequency Comb Generation Utilizing a Gain-Switched Weak-Resonant-Cavity Fabry–Perot Laser Diode under Multi-Wavelength Optical Injection

High-efficiency and broadband on-chip electro-optic frequency comb generators

Microwave resonator-enabled broadband on-chip electro-optic frequency comb generation

Integrated high-efficiency and broadband electro-optic frequency comb generators

A stabilized 18 GHz chip-scale optical frequency comb at 2.8x10-16 relative inaccuracy

Broadband electro-optic frequency comb generation in an integrated microring resonator