Full Helicon thruster modeling

Daniele Iannarelli,Antonella Ingenito,Francesco Napoli,Filippo Cichocki,Carmine Castaldo,Antonella De Ninno,Simone Mannori,Alessandro Cardinali,Francesco Taccogna

2024-07-31

Abstract:This research work is part of a PhD project aiming to design a new helicon plasma thruster for cargo space missions, within a collaboration between the School of Aerospace Engineering of La Sapienza University and the ENEA Frascati research center. A 0-D global design model of the thruster is first established to identify the main operational conditions of the thruster, starting from a targeted performance in terms of specific impulse and thrust. These operational conditions are tested with dedicated simulations on the electromagnetic plasma-wave interaction within the ionization chamber, and on the electrostatic plasma acceleration within the magnetic nozzle. The former are carried out with a finite element electromagnetic code and confirm the technical feasibility of the identified operational RF power with a predefined chamber geometry. The latter are obtained with an electrostatic particle-in-cell code, which allows to estimate more precisely the achieved thruster performance. A sub-optimal thruster with an absorbed plasma power of around 1 kW, a thrust of around 10 mN and a specific impulse higher than 1000 s is successfully simulated. The established simulation framework will serve as the basis for the next optimization of the thruster geometry and operational conditions, with the ultimate goal of building and testing a new helicon thruster prototype.

Plasma Physics

What problem does this paper attempt to address?

The paper aims to address the following issues:

Designing a novel helicon plasma thruster for cargo space missions. The study involves establishing a 0-D global design model to determine the main operating conditions of the thruster, based on target performance for specific impulse and thrust. These operating conditions are tested through dedicated simulations of electromagnetic wave-plasma interactions in the ionization chamber and electrostatic plasma acceleration in the magnetic nozzle. The former is conducted using finite element electromagnetic codes, verifying the feasibility of RF power techniques under predefined ionization chamber geometries; the latter uses electrostatic particle-in-cell (PIC) codes to more accurately estimate thruster performance.

The study successfully simulated a suboptimal thruster, with absorbed plasma power of approximately 1 kilowatt, thrust of about 10 millinewtons, and specific impulse exceeding 1000 seconds. The established simulation framework will serve as a basis for further optimization of the thruster's geometry and operating conditions, with the ultimate goal of constructing and testing a new helicon thruster prototype.