Abstract:This study presents a novel mechanical metallic reflector array to guide wireless signals to the point of interest, thereby enhancing received signal quality. Comprised of numerous individual units, this device, which acts as a linear Fresnel reflector (LFR), facilitates the reflection of incoming signals to a desired location. Leveraging geometric principles, we present a systematic approach for redirecting beams from an Access Point (AP) toward User Equipment (UE) positions. This methodology is geared towards optimizing beam allocation, thereby maximizing the number of beams directed towards the UE. Ray tracing simulations conducted for two 3D wireless communication scenarios demonstrate significant increases in path gains and received signal strengths (RSS) by at least 50dB with strategically positioned devices.
What problem does this paper attempt to address?
This paper attempts to solve the problems of path loss and insufficient signal strength encountered in wireless signal propagation, especially the signal attenuation problems in millimeter - wave (mmWave) and terahertz (THz) frequency bands in non - line - of - sight (NLOS) scenarios. Specifically, the author proposes a new method based on a metal linear Fresnel reflector (LFR) array to enhance the received signal quality and direct the signal to the target location.
### Main Problems and Solutions
1. **Path Loss and Signal Attenuation**:
- In high - frequency bands (such as millimeter - wave and terahertz), signals will encounter significant path loss and attenuation during transmission, especially in non - line - of - sight scenarios.
- Although traditional reconfigurable intelligent surfaces (RIS) can improve signal propagation, they are usually limited to specific frequency bands and are costly.
2. **Enhancing Signal Coverage and Reception Intensity**:
- The author proposes using a metal linear Fresnel reflector (LFR) array to guide wireless signals. By adjusting the angle of the reflector, the signal can reach user equipment (UE) more effectively.
- This method utilizes geometric principles. By precisely controlling the angle of each reflector unit, multiple reflection paths can converge at the UE location, thereby significantly improving path gain and received signal strength (RSS).
3. **Multi - band Compatibility and Low Cost**:
- Different from existing RIS technologies, this method can work in a wide frequency range, with higher flexibility and cost - effectiveness.
- Once the reflector is configured, it does not require continuous power supply, so it is especially suitable for indoor environments or application scenarios of fixed receiving devices.
### Experimental Verification
The author verified the effectiveness of this method through simulation, and tested it in different scenarios of L - shaped and T - shaped corridors. The results show that using this method can significantly improve path gain, especially in the case of no direct line - of - sight, the path gain is increased by at least 50 dB.
### Formula Representation
The geometric calculation formulas involved in the paper are as follows:
- **Normal Vector Calculation**:
\[
\vec{n}=\frac{1}{2}\left(\frac{\overrightarrow{AB}}{\vert\overrightarrow{AB}\vert}+\frac{\overrightarrow{AC}}{\vert\overrightarrow{AC}\vert}\right)
\]
where \(\vec{n}\) is the normal vector of the material surface, point \(A\) is the center of the reflector unit, point \(B\) is the location of the access point (AP), and point \(C\) is the location of the user equipment (UE).
- **Coordinate Transformation**:
\[
r = \sqrt{x^{2}+y^{2}+z^{2}}
\]
\[
\theta=\arccos\left(\frac{z}{r}\right)
\]
\[
\phi=\text{sgn}(y)\arccos\left(\frac{x}{\sqrt{x^{2}+y^{2}}}\right)
\]
where \(x, y, z\) are the coordinates of the normal vector \(\vec{n}\), \(r\) is the length of the normal vector, \(\theta\) is the elevation angle, \(\phi\) is the azimuth angle, and \(\text{sgn}(·)\) is the sign function.
Through these formulas, the author can precisely control the angle of the reflector unit, thereby achieving the best focusing and guiding of the signal.
### Summary
This paper proposes an innovative metal linear Fresnel reflector array method for enhancing the path gain and received signal strength of wireless signals, especially performing well in high - frequency bands and non - line - of - sight scenarios. This method not only improves the signal coverage range, but also has the advantages of multi - band compatibility and low cost.