Abstract:To rationalize the relatively high investment that industrial automation systems entail, research in the field of intelligent machines should target high value functions such as fettling, die-finishing, deburring, and fixtureless manufacturing. For achieving this goal, past work has concentrated on force control algorithms at the system level with limited focus on performance expansion at the actuator level. We present a comprehensive literature review on robot force control, including algorithms, specialized actuators, and robot control software. A robot force control testbed was developed using Schunk's PowerCube 6-DOF Arm and a six-axis ATI force/torque sensor. Using parameter identification experiments, manipulator module inertias and the motor torque constant were estimated. Experiments were conducted to study the practical issues involved in implementing stable contact transitions and programmable endpoint impedance. Applications to human augmentation, virtual fixtures, and teleoperation are discussed. These experiments are used as a vehicle to understand the performance improvement achievable at the actuator level. The approach at UTRRG has been to maximize the choices within the actuator to enhance its intelligence. Drawing on this 20-year research history in electromechanical actuator architecture, we propose a new concept that mixes two inputs, distinct in their velocity ratios, within the same dual actuator called a Force/Motion Actuator (FMA). Detailed kinematic and dynamic models of this dual actuator are developed. The actuator performance is evaluated using simulations with an output velocity specification and resolving input trajectories using a minimum-norm solution. It is shown that a design choice of 14:1 motion scaling between the two inputs results in good sensitivity to output force disturbances without compromising velocity tracking performance.

Influence Vectors Control for Robots Using Cellular-like Binary Actuators

Random Vibration Control for Multi-Degree-of-freedom Mechanical Systems with Soft Actuators

Iteratively Successive Projection: A Novel Continuous Approach for the Task-Based Control of Redundant Robots.

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

A Novel Impedance Control Based on Equivalent Stiffness for Hydraulic Single-leg Robot

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Leveraging Natural Load Dynamics with Variable Gear-ratio Actuators

Control- & Task-Aware Optimal Design of Actuation System for Legged Robots using Binary Integer Linear Programming

Dynamic modeling and roubust touque control of a discrete variable stiffness actuator

Redundant Robotic Arm Control Using Variable Structure Control System

Intelligent robotic impedance control using embedded system structure

Preliminary Studies on Force/Motion Control of Intelligent Mechanical Systems

Exponential Auto-Tuning Fault-Tolerant Control of N Degrees-of-Freedom Manipulators Subject to Torque Constraints

Exploiting null space potentials to control arm robots compliantly performing nonlinear tactile tasks

A nine-degree-of-freedom modular redundant robotic manipulator: Development and experimentation

Dynamic Hybrid Velocity/force Control of Robot Compliant Motion over Globally Unknown Objects.

A Hierarchical Control Strategy for a Rigid–Flexible Coupled Hexapod Bio-Robot

An optimal control strategy for hybrid actuator systems: Application to an artificial muscle with electric motor assist

Toward coordinated planning and hierarchical optimization control for highly redundant mobile manipulator

A Purely-Reactive Manipulability-Maximising Motion Controller