Notions of uniform manifolds

Jaap Eldering

2024-07-24

Abstract:We explore a definition of uniformity on noncompact manifolds that does not require a Riemannian metric, but is equivalent to bounded gemetry. These are unfinished research notes (and will likely never be published), but since they were cited by other people, I'm submitting this here for easier referencing.

Differential Geometry

What problem does this paper attempt to address?

Persistence of noncompact normally hyperbolic invariant manifolds in bounded geometry

Jaap Eldering

DOI: https://doi.org/10.1016/j.crma.2012.06.009

2012-05-12

Abstract:We prove a persistence result for noncompact normally hyperbolic invariant manifolds in Riemannian manifolds of bounded geometry. The bounded geometry of the ambient manifold is a crucial assumption in order to control the uniformity of all estimates throughout the proof.

Dynamical Systems,Differential Geometry
On the Geometry of Conullity Two Manifolds

Jacob Van Hook

2023-05-11

Abstract:If $\Gamma$ is the nullity space of the curvature tensor of a Riemannian manifold $M^n$, it is well known that if its dimension is constant and if $M^n$ is complete then the distribution $\Gamma$ is completely integrable with flat leaves. The case of $\dim \Gamma = n-2$ are the so called conullity two manifolds which naturally arise in various geometric contexts. The obstruction to the metric splitting isometrically is a 2x2 matrix which is either nilpotent or invertible. We study the case where it is nilpotent, or equivalently where the scalar curvature is constant along the leaves of $\Gamma$. When $M^n$ is locally irreducible we show that $M^n$ admits a Lipschitz foliation $F$ by totally geodesic flat hyperplanes and determine the metric on a naturally defined open dense subset in terms of $n-1$ functions, uniquely determined up to isometry. We can also find examples of smooth complete metrics of conullity two where the foliation $F$ is smooth only on the complement of a Cantor set. We furthermore show that the fundamental group is either trivial or infinite cyclic.

Differential Geometry
Uniform locales and their constructive aspects

Graham Manuell

2024-01-28

Abstract:Much work has been done on generalising results about uniform spaces to the pointfree context. However, this has almost exclusively been done using classical logic, whereas much of the utility of the pointfree approach lies in its constructive theory, which can be interpreted in many different toposes. Johnstone has advocated for the development of a constructive theory of uniform locales and wrote a short paper on the basic constructive theory via covering uniformities, but he never followed this up with a discussion of entourage uniformities or completions. We present a more extensive constructive development of uniform locales, including both entourage and covering approaches, their equivalence, completions and some applications to metric locales and localic algebra. Some aspects of our presentation might also be of interest even to classically minded pointfree topologists. These include the definition and manipulation of entourage uniformities using the internal logic of the geometric hyperdoctrine of open sublocales and the emphasis on pre-uniform locales. The latter leads to a description of the completion as the uniform reflection of the pre-uniform locale of Cauchy filters and a new result concerning the completion of pre-uniform localic rings, which can be used to easily lift addition and multiplication on $\mathbb{Q}$ to $\mathbb{R}$ (or $\mathbb{Q}_p$) in the pointfree setting.

General Topology,Logic
Uniformisation of higher-dimensional minimal varieties

Daniel Greb,Stefan Kebekus,Behrouz Taji

DOI: https://doi.org/10.1090/pspum/097.1/01676

2016-08-24

Abstract:After a historical discussion of classical uniformisation results for Riemann surfaces, of problems appearing in higher dimensions, and of uniformisation results for projective manifolds with trivial or ample canonical bundle, we introduce the basic technical concepts and sketch the ideas of the proofs for recent uniformisation theorems for singular varieties obtained by the authors in collaboration with Thomas Peternell.

Algebraic Geometry,Complex Variables,Differential Geometry
A Notion of Nonpositive Curvature for General Metric Spaces

Miroslav Bacak,Bobo Hua,Juergen Jost,Martin Kell,Armin Schikorra

DOI: https://doi.org/10.1016/j.difgeo.2014.11.002

IF: 0.536

2015-01-01

Differential Geometry and its Applications

Abstract:We introduce a new definition of nonpositive curvature in metric spaces and study its relationship to the existing notions of nonpositive curvature in comparison geometry. The main feature of our definition is that it applies to all metric spaces and does not rely on geodesics. Moreover, a scaled and a relaxed version of our definition are appropriate in discrete metric spaces, and are believed to be of interest in geometric data analysis.
A geometric characterization of $\mathbb{N}$-manifolds and the Frobenius theorem

Henrique Bursztyn,Miquel Cueca,Rajan Amit Mehta

2024-09-03

Abstract:This paper studies graded manifolds with local coordinates concentrated in non-negative degrees. We provide a canonical description of these objects in terms of classical geometric data and, building on this geometric viewpoint, we prove the Frobenius theorem for distributions in this graded setting.

Differential Geometry,Mathematical Physics,Symplectic Geometry
Universal covers of non-negatively curved manifolds and formality

Aleksandar Milivojevic

2024-06-28

Abstract:We show that if the universal cover of a closed smooth manifold admitting a metric with non-negative Ricci curvature is formal, then the manifold itself is formal. We reprove a result of Fiorenza-Kawai-Lê-Schwachhöfer, that closed orientable manifolds with a non-negative Ricci curvature metric and sufficiently large first Betti number are formal. Our method allows us to remove the orientability hypothesis; we further address some cases of non-closed manifolds.

Differential Geometry,Algebraic Topology
Nonnegatively and Positively curved manifolds

Burkhard Wilking

DOI: https://doi.org/10.48550/arXiv.0707.3091

2007-07-20

Abstract:This is a survey written for a special edition of the journal of differential geometry.

Differential Geometry
On a generalized notion of metrics

Wolf-Jürgen Beyn

DOI: https://doi.org/10.1007/s00010-024-01092-y

2024-06-23

Aequationes Mathematicae

Abstract:In these notes we generalize the notion of a (pseudo) metric measuring the distance of two points, to a (pseudo) n -metric which assigns a value to a tuple of points. Some elementary properties of pseudo n -metrics are provided and their construction via exterior products is investigated. We discuss some examples from the geometry of Euclidean vector spaces leading to pseudo n -metrics on the unit sphere, on the Stiefel manifold, and on the Grassmann manifold. Further, we construct a pseudo n -metric on hypergraphs and discuss the problem of generalizing the Hausdorff metric for closed sets to a pseudo n -metric.

mathematics, applied
Uniform measures on the arbitrary compact metric spaces, with applications

E. Ostrovsky,L. Sirota,E.Ostrovsky,L.Sirota

DOI: https://doi.org/10.48550/arXiv.1403.5725

2014-03-23

Functional Analysis

Abstract:We introduce and investigate in this short report the new notion of uniform measure (distribution) on the arbitrary compact metric space. We consider also some possible applications of these measures in the theory of imbedding theorems and in the theory of random processes (fields), in particular, in the so-called majorizing (and minorizing) measures method, belonging to X.Fernique and M.Talagrand. These considerations based on the L.Arnold and P.Imkeller generalization of the classical A.M.Garsia-E.Rodemich-H.Jr.Rumsey inequality and X.Fernique-M.Talagrand estimation for random fields.
A Note on Distributional Semi-Riemannian Geometry

Roland Steinbauer

DOI: https://doi.org/10.48550/arXiv.0812.0173

2008-12-01

Abstract:We discuss some basic concepts of semi-Riemannian geometry in low-regularity situations. In particular, we compare the settings of (linear) distributional geometry in the sense of L. Schwartz and nonlinear distributional geometry in the sense of J.F. Colombeau.

General Relativity and Quantum Cosmology,Differential Geometry
Bismut Ricci flat generalized metrics on compact homogeneous spaces (including a Corrigendum)

Jorge Lauret,Cynthia E. Will

2023-12-27

Abstract:A generalized metric on a manifold $M$, i.e., a pair $(g,H)$, where $g$ is a Riemannian metric and $H$ a closed $3$-form, is a fixed point of the generalized Ricci flow if and only if $(g,H)$ is Bismut Ricci flat: $H$ is $g$-harmonic and $ric(g)=\tfrac{1}{4} H_g^2$. On any homogeneous space $M=G/K$, where $G=G_1\times G_2$ is a compact semisimple Lie group with two simple factors, under some mild assumptions, we exhibit a Bismut Ricci flat $G$-invariant generalized metric, which is proved to be unique among a $4$-parameter space of metrics in many cases, including when $K$ is neither abelian nor semisimple. On the other hand, if $K$ is simple and the standard metric is Einstein on both $G_1/\pi_1(K)$ and $G_2/\pi_2(K)$, we give a one-parameter family of Bismut Ricci flat $G$-invariant generalized metrics on $G/K$ and show that it is most likely pairwise non-homothetic by computing the ratio of Ricci eigenvalues. This is proved to be the case for every space of the form $M=G\times G/\Delta K$ and for $M^{35}=SO(8)\times SO(7)/G_2$. A Corrigendum has been added in Appendix A.

Differential Geometry
Rigidity for Einstein manifolds under bounded covering geometry

Cuifang Si,Shicheng Xu

2024-09-24

Abstract:In this note we prove three rigidity results for Einstein manifolds with bounded covering geometry. (1) An almost flat manifold $(M,g)$ must be flat if it is Einstein, i.e. $\operatorname{Ric}_g=\lambda g$ for some real number $\lambda$. (2) A compact Einstein manifolds with a non-vanishing and almost maximal volume entropy is hyperbolic. (3) A compact Einstein manifold admitting a uniform local rewinding almost maximal volume is isometric to a space form.

Differential Geometry
Complete Riemannian 4-manifolds with uniformly positive scalar curvature

Otis Chodosh,Davi Maximo,Anubhav Mukherjee

2024-07-08

Abstract:We obtain topological obstructions to the existence of a complete Riemannian metric with uniformly positive scalar curvature on certain (non-compact) $4$-manifolds. In particular, such a metric on the interior of a compact contractible $4$-manifold uniquely distinguishes the standard $4$-ball up to diffeomorphism among Mazur manifolds and up to homeomorphism in general. We additionally show there exist uncountably many exotic $\mathbb{R}^4$'s that do not admit such a metric and that any (non-compact) tame $4$-manifold has a smooth structure that does not admit such a metric.

Differential Geometry,Geometric Topology,Symplectic Geometry
On Certain Rigidity Results of Compact Regular $(κ, μ) $-Manifolds

Sannidhi Alape,Atreyee Bhattacharya,Dheeraj Kulkarni

2023-11-03

Abstract:In this article, we investigate the Riemannian and semi-Riemannian metrics on the base space of the Boothby-Wang fibration of a closed regular non-Sasakian $(\kappa, \mu)$-manifold. To this end, we study a natural class of deviations of the projection map from being (semi-)Riemannian submersions. We consider deviations that preserve the canonical bi-Legendrian structure on the given $(\kappa, \mu)$-manifold. We present rigidity results for Riemannian and semi-Riemannian metrics on the base space which orthogonalize the natural bi-Lagrangian structure induced by the $(\kappa, \mu)$-structure. This approach gives a unified framework to analyze rigidity results in both categories. More precisely, in the Riemannian category, we obtain uniqueness of Sasakian structure on the given $(\kappa, \mu)$-manifold which orthogonalizes the canonical bi-Legendrian structure. In the semi-Riemannian category, we obtain an explicit description of the finitely many para-contact structures which orthogonalize the canonical bi-Legendrian structure.

Differential Geometry,Mathematical Physics,Geometric Topology
A Note about Isotopy and Concordance of Positive Scalar Curvature Metrics on Compact Manifolds with Boundary

Alessandro Carlotto,Chao Li,Universit,#224,di Trento, Italy,New York University, USA

DOI: https://doi.org/10.3842/sigma.2024.014

2024-03-12

Symmetry Integrability and Geometry Methods and Applications

Abstract:We study notions of isotopy and concordance for Riemannian metrics on manifolds with boundary and, in particular, we introduce two variants of the concept of minimal concordance, the weaker one naturally arising when considering certain spaces of metrics defined by a suitable spectral ''stability'' condition. We develop some basic tools and obtain a rather complete picture in the case of surfaces.

physics, mathematical
On elliptic and quasiregularly elliptic manifolds

Fedor Manin,Eden Prywes

2024-10-25

Abstract:In his book "Metric structures for Riemannian and non-Riemannian spaces", Gromov defined two properties of Riemannian manifolds, ellipticity and quasiregular ellipticity, and suggested that there may be a connection between the two. Since then, groups of researchers working independently have proved strikingly similar results about these two concepts. We obtain new topological obstructions to the two properties: most notably, we show that closed manifolds of both types must have virtually abelian fundamental group. We also give the first examples of open manifolds which are elliptic but not quasireguarly elliptic and vice versa. Whether there is a direct connection between these properties -- and, in particular, whether they are equivalent for closed manifolds -- remains elusive.

Differential Geometry,Complex Variables,Metric Geometry
A class of compact Poincare-Einstein manifolds: properties and construction

A. Rod Gover,Felipe Leitner

DOI: https://doi.org/10.48550/arXiv.0808.2097

2008-08-15

Abstract:We develop a geometric and explicit construction principle that generates classes of Poincare-Einstein manifolds, and more generally almost Einstein manifolds. Almost Einstein manifolds satisfy a generalisation of the Einstein condition; they are Einstein on an open dense subspace and, in general, have a conformal scale singularity set that is a conformal infinity for the Einstein metric. In particular, the construction may be applied to yield families of compact Poincare-Einstein manifolds, as well as classes of almost Einstein manifolds that are compact without boundary. We obtain classification results which show that the construction essentially exhausts a class of almost Einstein (and Poincare-Einstein) manifold. We develop the general theory of fixed conformal structures admitting multiple compatible almost Einstein structures. We also show that, in a class of cases, these are canonically related to a family of constant mean curvature totally umbillic embedded hypersurfaces.

Differential Geometry,Mathematical Physics
A metric for the space of submanifolds of Galatius and Randal-Williams

Federico Cantero Morán

DOI: https://doi.org/10.48550/arXiv.1512.06849

2015-12-21

Geometric Topology

Abstract:Galatius and Randal-Williams defined a topology on the set of closed submanifolds of ${\mathbb R}^n$. B\"okstedt and Madsen proved that a $C^1$-version of this topology is metrizable by showing that it is regular and second countable. Using that the scanning map of a topological sheaf on manifolds is an embedding, we give an explicit metric to the space considered by B\"okstedt and Madsen. Then, we compare this topology with the Fell topology and we use the Hausdorff distance to give another metric to the space of Galatius and Randal-Williams.
On Certain Rigidity Results of Compact Regular -Manifolds

Alape, Sannidhi

DOI: https://doi.org/10.1007/s00025-024-02295-0

2024-11-03

Results in Mathematics

Abstract:In this article, we investigate the Riemannian and semi-Riemannian metrics on the base space of the Boothby-Wang fibration of a closed regular non-Sasakian -manifold. To this end, we study a natural class of deviations of the projection map from being (semi-)Riemannian submersions. We consider deviations that preserve the canonical bilegendrian structure on the given -manifold. This approach gives a unified framework to analyze rigidity results in both categories. As a consequence, in the Riemannian category, we obtain uniqueness of Sasakian structure on the given -manifold which orthogonalizes the canonical bilegendrian structure. In the semi-Riemannian category, we obtain an explicit description of the finitely many para-Sasakian structures which orthogonalize the canonical bilegendrian structure.

mathematics, applied

Notions of uniform manifolds

Persistence of noncompact normally hyperbolic invariant manifolds in bounded geometry

On the Geometry of Conullity Two Manifolds

Uniform locales and their constructive aspects

Uniformisation of higher-dimensional minimal varieties

A Notion of Nonpositive Curvature for General Metric Spaces

A geometric characterization of $\mathbb{N}$-manifolds and the Frobenius theorem

Universal covers of non-negatively curved manifolds and formality

Nonnegatively and Positively curved manifolds

On a generalized notion of metrics

Uniform measures on the arbitrary compact metric spaces, with applications

A Note on Distributional Semi-Riemannian Geometry

Bismut Ricci flat generalized metrics on compact homogeneous spaces (including a Corrigendum)

Rigidity for Einstein manifolds under bounded covering geometry

Complete Riemannian 4-manifolds with uniformly positive scalar curvature

On Certain Rigidity Results of Compact Regular $(κ, μ) $-Manifolds

A Note about Isotopy and Concordance of Positive Scalar Curvature Metrics on Compact Manifolds with Boundary

On elliptic and quasiregularly elliptic manifolds

A class of compact Poincare-Einstein manifolds: properties and construction

A metric for the space of submanifolds of Galatius and Randal-Williams

On Certain Rigidity Results of Compact Regular -Manifolds