Post-resonance reflections break the loss-vs-phase-resolution trade-off in microwave electronics

Bala Govind,Andreia Cathelin,Alyssa Apsel
2024-07-23
Abstract:Precise phase control of microwaves and millimeter waves is critical for today's wireless communication and signal processing electronics. For decades, achieving even modest phase-shifting resolution has demanded a complex mix of transistor switches and passive electromagnetic structures. These true-phase delay, true-time-delay or quasi-true-time-delay circuits operate near resonances that heavily attenuate and distort signals, limiting transmission bandwidth. Despite numerous attempts, passive phase shifters have remained lossy and incompatible with high-channel-capacity beamforming, irrespective of the semiconductor fabrication process. In this article, we introduce a mechanism whereby waveguide reflectors based on coupled resonances can be reprogrammed to evade loss. Central to their operation is that loss from internal resonances is confined to low frequencies, while at high frequencies, their reflectivity is maximized and broadband phase variations, induced by those resonances, still persist. Since performance in the low-loss post-resonance spectrum is largely agnostic to the number of switches, ultra-fine digital tuning is possible. This breaks the historical tradeoff between loss and precision to achieve resolution surpassing state-of-the-art integrated circuits by over three orders (bits) of magnitude. The device does not distort the transmitted signal and consumes no power. Moreover, the chip occupies a sub-wavelength footprint in a Complementary Metal Oxide Semiconductor platform. This makes it an optimal candidate for seamless integration in on-chip multi-gigabit data links, radio astronomy transceivers and control hardware for millimeter-wave qubits.
Signal Processing,Applied Physics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: In microwave electronics, traditional phase - control circuits (such as phase shifters) have an inherent trade - off problem, that is, high - resolution phase control is often accompanied by large signal losses. This trade - off limits the development of high - performance wireless communication and signal - processing systems, especially in 5G and 6G technologies, where the demand for high - precision, low - loss phase control is increasing day by day. Specifically, in order to achieve a relatively high phase resolution, traditional phase shifters usually require complex transistor switches and passive electromagnetic structures. These structures will severely attenuate and distort signals when approaching the resonance frequency, thus limiting the transmission bandwidth. Despite many attempts, existing passive phase shifters still have relatively high losses and are not compatible with high - channel - capacity beamforming, regardless of the semiconductor manufacturing process used. ### Core contributions of the paper To solve the above - mentioned problems, this paper proposes a new mechanism based on "post - resonance reflection", which circumvents losses by reprogramming the coupling resonances in the waveguide reflector. The key points of this method are: 1. **Low - frequency loss limitation**: The losses caused by internal resonances are limited to the low - frequency band. 2. **High - frequency reflection maximization**: In the high - frequency band, the reflectivity is maximized, while the broadband phase change caused by these resonances still exists. 3. **Ultra - fine digital tuning**: Since the performance is hardly affected by the number of switches in the low - loss post - resonance spectrum, ultra - fine digital tuning can be achieved. This method breaks the historical trade - off between loss and resolution, achieving a resolution three orders of magnitude (bits) higher than that of existing integrated circuits while maintaining extremely low signal losses (only 5 dB). In addition, this device does not distort the transmitted signal, does not consume DC power, and occupies a sub - wavelength area, which is suitable for the complementary metal - oxide - semiconductor (CMOS) platform. ### Application prospects This new - type phase shifter not only improves the accuracy and efficiency of phase control, but also has the following advantages: - It is suitable for on - chip multi - gigabit data links, radio - astronomy receivers, and millimeter - wave qubit control systems. - It improves the array factor, reduces quantization noise and sidelobes, and significantly improves the signal - to - noise ratio. - It exhibits excellent linearity at millimeter - wave frequencies without the need for complex calibration hardware and back - end digital - signal processing. In short, by introducing the "post - resonance reflection" mechanism, this paper solves the long - standing contradiction between loss and phase resolution in microwave electronics, providing a new solution for future high - performance communication and signal - processing systems.