Abstract:We are considering the problem of controlling the longitudinal motion of half-vehicle electric vehicle (EV) or hybrid electric vehicle (HEV). A substantial part of the problem lies in the modeling of the controlled system dynamics, including those of: (i) the half-vehicle chassis motion; (ii) the actuator constituted of a brushless direct-current (BLDC), as an in-wheel motor, along with the associated voltage inverter; (iii) the tire. The dynamics of the latter are presently captured by Pacejka's model which is known to be more most accurate as it accounts for the various phenomena generated at the contact tire/road. The whole system model also takes into account other nonlinear effects, e.g., including the road load, the rolling resistance and the aerodynamic effects. Compared to those used in existing comparable works, the system model developed in this study is much more accurate. But it is also more complex, because it is of higher dimension and stronger nonlinearity, increasing substantially the complexity of the control design problem. The control objectives include tight regulation of the vehicle's speed in the various driving modes and safety of the on-board passengers. These objectives are technically reformulated in terms of reference trajectories, to be matched by the vehicle speeds despite unpredictable variations in aerodynamic forces and road parameters. This challenging control problem is dealt by developing a cascade-structure adaptive controller. The cascade structure is resorted to make the compensation for speed dynamics and disturbances decoupled from those of torque dynamics. The adaptive nature is realized by using parameter estimators, providing the controller with the capacity of compensating the effect of parameter uncertainty. The various controller components are designed making use of several different theoretical design tools including the backstepping control method and Lyapunov stability method. In addition to theoretical analysis, the performances of the developed controller are highlighted by simulation results in the presence of varying aerodynamic forces, road slope and various road surfaces. Comparison with simpler controller is also performed.

Dynamic Modeling and Stability Analysis of Balancing in Riderless Electric Scooters

Steering Control and Stability Analysis for an Autonomous Bicycle: Part I—theoretical Framework and Simulations

Steering Control and Stability Analysis for an Autonomous Bicycle through Reduced Dynamics with Servo-Constraints

Steering control and stability analysis for an autonomous bicycle: part II experiments and a modified linear control law

An electric kickscooter multibody model: equations of motion and linear stability analysis

Analysis of Stability for Nonlinear Closed-loop Vehicle Equipped with Electric Power Steering System

Dynamics Modeling and Postural Stability Control of a Unicycle Robot

Fuzzy sliding-mode under-actuated control for autonomous dynamic balance of an electrical bicycle

RHONN-Modeling-Based Predictive Safety Assessment and Torque Vectoring for Holistic Stabilization of Electrified Vehicles

Model and Simulation of Self-balance Control System

Dynamic Modeling of an Unmanned Motorcycle and Combined Balance Control with Both Steering and Double CMGs

Dynamic Stability Control Strategy Development for an In-Wheel Motorized Electric Vehicle

A Stochastic Model for Electric Scooter Systems

Data-driven optimization for rebalancing shared electric scooters

Gain Scheduled Controller Design for Balancing an Autonomous Bicycle

Combined control algorithm based on synchronous reinforcement learning for a self-balancing bicycle robot

Nonlinear Model Predictive Control for a Self-Balancing Wheelchair

Effect of Weight Distribution and Active Safety Systems on Electric Vehicle Performance

Balancing control of a bicycle-riding humanoid robot with center of gravity estimation

Modeling and control design for half electric vehicle with wheel BLDC actuator and Pacejka's tire

Steady-State Manifold of Riderless Motorcycles.