LuSEE-Night power requirements and power generation strategy

Benjamin R.B. Saliwanchik,Sven Herrmann,Ivan Kotov,Paul O'Connor,Maxim Potekhin,Anže Slosar,Stuart Bale

2024-07-10

Abstract:The Lunar Surface Electromagnetics Experiment at Night (LuSEE-Night) is a project designed to investigate the feasibility of observing the Cosmic Dark Ages using an instrument on the lunar far-side. LuSEE-Night will measure the redshifted 21 cm transition of neutral hydrogen over a frequency range of 0.1-50 MHz, covering the redshift range 27 < z < 1100. The LuSEE-Night instrument is a radio frequency spectrometer, consisting of four horizontal monopole antennas, arranged to give wide zenith-pointing beams with two orthogonal linear polarizations. This combination of polarization, spectral, and angular sensitivity will be necessary to separate the cosmological signal from significantly stronger foreground emissions. LuSEE-Night will observe in drift scan during lunar night while the moon shields it from radio frequency interference from both the Earth and sun, and will transmit science and telemetry data back to Earth via an orbital relay during the lunar day. LuSEE-Night will have to operate in a challenging environment: its electronics must operate under hard radiation, the instrument must be thermally isolated during the cold 100~K lunar night, and have a thermal rejection path to survive the 390~K daytime temperature, and its photovoltaic and battery systems must provide sufficient power to operate during two weeks of lunar night. Furthermore, the instrument spectrometer must be powered throughout the lunar night using only a 7~kWh battery, due to mass limitations. Here we describe the power generation, storage, and delivery subsystems of the LuSEE-Night instrument, and the simulations which were performed to design the power subsystems and ensure instrument survival and operation throughout the long lunar night. We also describe the Concept of Operations (ConOps) developed for the LuSEE-Night mission, which derives from the power management simulations.

Instrumentation and Methods for Astrophysics,Cosmology and Nongalactic Astrophysics

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to explore and verify the feasibility of conducting low - frequency radio observations on the far side of the moon to study the Cosmic Dark Ages. Specifically, the LuSEE - Night project aims to:

1. **Establish the feasibility of low - frequency radio observations from the far side of the moon**: By deploying instruments on the far side of the moon, avoid radio - frequency interference (RFI) from the Earth and the Sun, and utilize the natural shielding effect of the moon.

2. **Conduct the most sensitive radio sky observations in the 0 - 50 MHz frequency band**: Especially in this frequency band, it is very difficult to conduct observations from the Earth's surface due to the opacity of the ionosphere and radio - frequency interference from human and meteorological sources.

3. **Quantify the systematic effects in global spectral measurements and study mitigation methods**: Ensure that the cosmological signal can be effectively separated from the stronger foreground emission signal.

4. **Constrain the existence of non - smooth monopole signals**: Control the sensitivity at the \(10^{- 3}\) level relative to the foreground signal.

### Specific Problems and Technical Challenges

To achieve these goals, the technical challenges faced by LuSEE - Night include:

- **Operation in extreme environments**:
- **Radiation tolerance**: Electronic devices must be able to operate normally in a high - radiation environment.
- **Thermal management**: The instrument needs to maintain thermal isolation in the cold lunar night (about 100 K) and have a heat dissipation path during the day (about 390 K).

- **Power management**:
- **Battery capacity limitation**: A 7 kWh lithium - ion battery needs to power the instrument throughout the 328 - hour lunar night.
- **Solar charging**: Three photovoltaic panels charge the battery and provide power for the instrument during the lunar day.

### Solutions

To solve these problems, the author describes the following in detail:

- **Design of power generation, storage and distribution subsystems**: Including solar array layout optimization, battery capacity and charging strategies.
- **Power demand simulation**: By simulating power demands and reserves at different time periods, ensure the survival and operation of the instrument during the long lunar night.
- **Concept of Operations (ConOps)**: Based on the power management simulation results, a detailed mission operation plan is formulated to ensure the optimal operation of the instrument during the lunar day and night.

Through these measures, the LuSEE - Night project hopes to successfully conduct low - frequency radio observations on the far side of the moon, thereby providing valuable data for the study of the Cosmic Dark Ages.