A flexured-gimbal 3-axis force-torque sensor reveals minimal cross-axis coupling in an insect-sized flapping-wing robot

Aaron Weber,Daksh Dhingra,Sawyer B. Fuller

2024-06-29

Abstract:The mechanical complexity of flapping wings, their unsteady aerodynamic flow, and challenge of making measurements at the scale of a sub-gram flapping-wing flying insect robot (FIR) make its behavior hard to predict. Knowing the precise mapping from voltage input to torque output, however, can be used to improve their mechanical and flight controller design. To address this challenge, we created a sensitive force-torque sensor based on a flexured gimbal that only requires a standard motion capture system or accelerometer for readout. Our device precisely and accurately measures pitch and roll torques simultaneously, as well as thrust, on a tethered flapping-wing FIR in response to changing voltage input signals. With it, we were able to measure cross-axis coupling of both torque and thrust input commands on a 180 mg FIR, the UW Robofly. We validated these measurements using free-flight experiments. Our results showed that roll and pitch have maximum cross-axis coupling errors of 8.58% and 17.24%, respectively, relative to the range of torque that is possible. Similarly, varying the pitch and roll commands resulted in up to a 5.78% deviation from the commanded thrust, across the entire commanded torque range. Our system, the first to measure two torque axes simultaneously, shows that torque commands have a negligible cross-axis coupling on both torque and thrust.

Robotics,Systems and Control

What problem does this paper attempt to address?

The problem this paper attempts to address is how to accurately measure the mapping relationship between voltage input signals and output torques in insect-sized flapping wing robots (FIR), particularly measuring the torques on two axes (pitch and roll) simultaneously and verifying whether there is cross-coupling of these torque commands between different axes.

Specifically, the main challenges faced by the researchers include:
1. **Mechanical Complexity**: The mechanical structure of flapping wing robots is very complex, making it difficult to predict their behavior.
2. **Unsteady Aerodynamics**: The aerodynamics generated by flapping motion are unsteady, increasing the difficulty of measurement.
3. **Scale Issues**: Measuring on sub-gram scale flapping wing robots is very challenging because the resolution of existing commercial multi-axis torque sensors is insufficient to meet the needs.

To address these challenges, the researchers designed a torque sensor based on a flexible universal joint that can simultaneously measure pitch and roll torques, as well as thrust. With this sensor, they were able to measure the torque and thrust changes of the 180-milligram UW RoboFly under different voltage input signals and verify the cross-coupling of these torque commands between different axes.

Ultimately, the research results show that the maximum cross-coupling errors for pitch and roll torques are 8.58% and 17.24%, respectively, while the maximum deviation in thrust variation under different axis torque commands is 5.78%. These findings help improve the mechanical design and flight controller design of flapping wing robots, especially when performing high-torque maneuvers.