Abstract:The resonant controller (RC), as a promising candidate for high-speed nonraster nanopositioning applications, can track the sinusoidal reference with zero steady-state error. This article presents a controller composed of several RCs in parallel for tracking nonraster sequential scanning trajectories. The selection for each RC in the parallel array is based on two considerations: one is the spectrum of the reference signal and the other is the harmonics caused by the nonlinearities of the nanopositioning stage. The performance of RC is highly dependent on the accurate placement of the resonant poles, but unfortunately, many existing digital implementation methods could cause a deviation of the resonant poles from their initial locations. To address this problem, a modified Tustin (MTus) method is proposed in this article to implement the controller with better accuracy. Furthermore, the fractional-order (FO) calculus is introduced to improve the transient performance of the RCs. To validate the proposed methods, a comprehensive examination of several types of the nonraster sequential scanning trajectories with a wide frequency range has been carried out on a nanopositioning stage. The results have been compared with other methods, showing that the tracking errors are reduced significantly under the controller implemented by the MTus method especially in high-frequency conditions and that the application of the FO calculus reduces the settling time of the controller by more than 30% in most cases. Note to Practitioners-The demand for high-speed atomic force microscope (AFM) increases rapidly. However, the commonly used raster trajectory limits the achievable scan speed of the AFM. An effective way to improve the scanning and imaging speed of the AFM is the application of the sequential nonraster scanning methods. The trajectories of sequential nonraster scanning patterns mainly composed of few sinusoid signals with different frequencies. Therefore, the resonant controller (RC) is introduced in this article as it is capable to track the sinusoidal reference with zero steady-state error. Several RCs are selected first based on the spectrum analysis of the reference and the consideration of the harmonics caused by the system nonlinearities, and then, they are connected in parallel to form the controller for precise tracking of the reference. In order to realize the digital implementation of the designed controller, a modified Tustin discretization method is proposed, which ensures the accurate resonant pole placement of the RC and thus maintains the tracking performance of the RC. In addition, the fractional-order (FO) calculus is introduced to speed up the convergence of the designed controller while preserving the tracking accuracy, and this parallel-structure FO RC (PSFORC) design can be implemented to other systems that require high-speed and high-accuracy tracking of the periodic signals.

Discrete-time Integral Resonant Control of Negative Imaginary Systems: Application to a High-speed Nanopositioner

Negative Imaginary Control Using Hybrid Integrator-Gain Systems: Application to MEMS Nanopositioner

Hybrid integrator-gain system based integral resonant controllers for negative imaginary systems

Digital control of negative imaginary systems: a discrete-time hybrid integrator-gain system approach

A dynamic controller synthesis methodology for negative imaginary systems using the internal model control principle

Negative Imaginary Systems Theory in the Robust Control of Highly Resonant Flexible Structures

Generalizing Negative Imaginary Systems Theory to Include Free Body Dynamics: Control of Highly Resonant Structures With Free Body Motion

Discrete-time Negative Imaginary Systems from ZOH Sampling

Compound active disturbance rejection control for resonance damping and tracking of nanopositioning

A frequency-domain approach to nonlinear negative imaginary systems analysis

Tracking Control of Nanopositioning Stages Using Parallel Resonant Controllers for High-Speed Nonraster Sequential Scanning.

A Decoupled Inversion-Based Iterative Control Approach to Multi-Axis Precision Positioning: 3-D Nanopositioning Example

Feedback Control of Negative-Imaginary Systems: Large Flexible structures with colocated actuators and sensors

Fractional Repetitive Control of Nanopositioning Stages for High-Speed Scanning Using Low-Pass FIR Variable Fractional Delay Filter

Fractional Repetitive Control of Nanopositioning Stages for Tracking High-Frequency Periodic Inputs with Nonsynchronized Sampling

On Lossless Negative Imaginary Systems

Finding the Nearest Negative Imaginary System with Application to Near-Optimal Controller Design

Static output feedback negative imaginary controller synthesis with an <i>H</i><sub></sub> norm bound

Quantifying the performance enhancement facilitated by fractional-order implementation of classical control strategies for nanopositioning

A Nonlinear Negative Imaginary Systems Framework with Actuator Saturation for Control of Electrical Power Systems

High-Bandwidth Control of Nanopositioning Stages Via an Inner-Loop Delayed Position Feedback.